Fabricante:
(Categoria: 106)
pressure:160 tthroat:360 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:920 x 700 mmHole in the table:150 mmtable height over floor:960 mmpassage to the back:590 mmram surface:620 x 560 mmspeed down:390 mm/sspeed up:390 mm/sworking speed:58 mm/spower requirement:30,0 kWweight:16,0 tdimensions (WxDxH):1,6 x 2,5 x 3,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch
pressure:2000 tdistance between columns:975 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1015 x 1050 mmtable height over floor:800 mmcapacity of ejector in table:6,3 tejector stroke in table:100 mmcapacity of ejector in ram:65 tejector stroke in ram:100 mmram surface:975 x 1050 mmreturn capacity:150 tspeed down:235 mm/sspeed up:250 mm/sworking speed:5 - 20 mm/soil volume:4000 lheight over floor:3,65 mheight beneath floor:3,75 mpower requirement:194,0 kWweight:105,0 tdimensions (WxDxH):5,0 x 6,5 x 7,4 m
pressure:100 tdistance between columns:1000 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:980 x 700 mmpressure of drawing cushion in table:4 x 10 / 1 x 20 tstroke of drawing cushion in table:180 mmtable height over floor:800 mmside window:400 mmram surface:1000 x 700 mmspeed down:500 mm/sspeed up:450 mm/sworking speed:60 mm/spower requirement:40,0 kWdimensions (WxDxH):1,5 x 1,4 x 4,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:4 x 10 t + 1 x 20 t, getrennt einschaltbar foundation pit:nicht erforderlich
pressure:200 tdistance between columns:970 mmstroke:360 mmDistance table/ram, max. stroke up, adjustment up:630 mmtable surface area:1000 x 800 mmcapacity of ejector:10 tejector stroke in table:160 mmtable height over floor:850 mmside window:400 mmram surface:1000 x 800 mmspeed down:420 mm/sspeed up:410 mm/sworking speed:50 mm/soil volume:1240 lreturn capacity:24 tpower requirement:45,0 + 15,0 kWweight:16,0 tdimensions (WxDxH):2,7 x 2,5 x 4,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:mechanisch foundation pit:nicht erforderlich
nominal force:160 tstroke:140 mmno. of strokes:85 /mindistance between columns:400 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:400 x 450 mmtable height over floor:800 mmAllowed max. force:230 tram surface:400 x 320 mmspindle diameter:125 mmpower requirement:7,35 kWweight:5,0 tdimensions (WxDxH):1,7 x 1,2 x 2,9 m
pressure:063 tthroat:450 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:720 x 800 mmhole in the table:280/250 mmtable height over floor:800 mmpassage to the back:290 mmram surface:450 x 280 mmram adjustment:63 mmpower requirement:7,5 kWweight:4,7 tdimensions (WxDxH):1,3 x 2,0 x 2,65 mclutch:pneumatisch overload protection in ram:mechanisch
Pressure:063 tthroat:400 mmstroke:16 - 90 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:350 mmtable surface area:1000 x 750 mmhole in the table:260 x 140 mmtable height over floor:710 mmram surface:600 x 220 mmram adjustment:50 mmweight:4,3 tdimensions (WxDxH):1,1 x 2,6 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch
pressure:100 tthroat:540 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:50 tstroke of drawing cushion in table:200 mmdie cushion area:710 x 650 mmtable height over floor:910 mmram surface:1000 x 1000 mmcapacity of ejector in ram:2 tejector stroke in ram:200 mmreturn capacity:19,5 tspeed down:400 mm/sspeed up:300 mm/sworking speed:57,7 mm/soil volume:650 lpower requirement:37,5 kWweight:15,0 tdimensions (WxDxH):1,5 x 2,5 x 4,45 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch
pressure:40 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:660 / 1000 mmtable surface area:630 x 500 mmhole in the table:200 mmtable height over floor:1060 / 720 mmram surface:450 x 360 mmspeed down:60 mm/sspeed up:300 mm/spower requirement:7,5 kWweight:2,75 tdimensions (WxDxH):1,0 x 1,8 x 3,05 madditional plate in table:height approx. 340 mm
pressure:050 tthroat:255 mmstroke:8 - 120 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:640 x 500 mmhole in the table:250 x 180 mmtable height over floor:710 - 930 mmtable adjustable:220 mmram surface:550 x 170 mmram adjustment:70 mmpower requirement:4,0 kWweight:3,1 tdimensions (WxDxH):1,5 x 1,5 x 2,3 m
pressure:150 tdistance between columns:300 mmstroke:180 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:570x180 / 300x410 mmtable height over floor:875 mmside window:180 mmram surface:180 mmspeed down:250 mm/sspeed up:160 mm/sworking speed:6 - 12 mm/soil volume:250 lpower requirement:11,0 kWweight:2,4 tdimensions (WxDxH):1,3 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich
pressure:40 tthroat:360 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:600 mmtable surface area:620 x 500 mmpressure of drawing cushion in table:16 tstroke of drawing cushion in table:150 mmtable height over floor:850 mmram surface:300 x 250 mmspeed down:200 mm/sspeed up:200 mm/sworking speed:40 mm/spower requirement:11,0 kWweight:2,8 tdimensions (WxDxH):1,1 x 1,7 x 3,0 mdrawing cushion in table:hydraulisch
pressure:63 tthroat:320 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:750 x 600 mmpressure of drawing cushion in table:6,5 tstroke of drawing cushion in table:80 mmdie cushion area:240 mmtable height over floor:800 mmram surface:500 x 450 mmcapacity of ejector in ram:0,5 tejector stroke in ram:70 mmspeed down:300 mm/sspeed up:300 mm/sworking speed:50 mm/soil volume:380 lpower requirement:12,0 kWweight:6,5 tdimensions (WxDxH):1,3 x 2,0 x 2,75 mdrawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical cutting impact cushioning:hydraulic
novo
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 €: 1366.47 €: 40 to: 1250 mm: Y1 / Y2 / X und R Achse : 200 mm: 1050 mm: 250 mm: 440 mm: servomotorischer Spindela : 115 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 1950 mm: 1450 mm: 2650 mm: 3600 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...
: neu : ca. 4 Monate ab Auftragse : Italien : 22900 €: 439.68 €: 40 to: 500 mm: 700x500 mm: 600 mm: 26 mm/s: 9 mm/s: 4 kW: 1400 mm: 900 mm: 2200 mm: 1300 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:050 tthroat:250 mmstroke:8 - 120 mmno. of strokes:100 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:650 x 515 mmhole in the table:115 mmtable height over floor:790 - 1020 mmtable adjustable:230 mmram surface:390 x 180 mmram adjustment:70 mmpower requirement:2,0 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,2 moverload protection in ram:mechanical
: neu : ca. 4 Monate ab Auftragse : Italien : 25000 €: 480 €: 70 to: 500 mm: 700x500 mm: 600 mm: 25 mm/s: 5 mm/s: 4 kW: 1400 mm: 900 mm: 2250 mm: 1900 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:200 tdistance between columns:1050 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:1000 x 1200 mmtable height over floor:850 mmside window:500 mmram surface:1050 x 870 mmspeed down:300 mm/sspeed up:300 mm/sworking speed:18 - 36 mm/spower requirement:37,0 kWweight:16,0 tdimensions (WxDxH):4,0 x 3,6 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch cutting impact cushioning:hydraulisch foundation pit:nicht erforderlich
pressure:100 tthroat:315 mmstroke:30 - 160 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:460 mmtable surface area:910 x 680 mmHole in the table:400 mmtable height over floor:800 mmpassage to the back:400 mmram surface:630 x 400 mmram adjustment:80 mmpower requirement:7,5 kWweight:7,5 tdimensions (WxDxH):1,7 x 2,0 x 3,0 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic
pressure:080 tthroat:300 mmstroke:8 - 112 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:467 mmtable surface area:710 x 560 mmhole in the table:240 x 115 mmtable height over floor:800 mmram surface:400 x 315 mmram adjustment:80 mmpower requirement:7,5 kWweight:5,1 tdimensions (WxDxH):1,4 x 1,9 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical
pressure:060 tthroat:220 mmstroke:6 - 94 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:340 mmtable surface area:680 x 400 mmhole in the table:120 x 70 mmtable height over floor:750 mmpassage to the back:290 mmram surface:240 x 240 mmram adjustment:57 mmpower requirement:3,7 kWweight:2,8 tdimensions (WxDxH):1,5 x 1,5 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic
pressure:100 tdistance between columns:1180 mmstroke:1 - 120 mmno. of strokes:90 /mindistance table/ram, stroke up:470 mmtable surface area:1100 x 700 mmtable height over floor:800 mmside window:400 mmram surface:740 x 350 mmram adjustment:100 mmpower requirement:37,0 kWweight:11,0 tdimensions (WxDxH):2,3 x 2,0 x 3,5 mknuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich
Pressure:630 tdistance between columns:1600 mmstroke:fix 250 mmno. of strokes:20 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1550 x 1200 mmtable height over floor:800 mmside window:620 mmram surface:1360 x 1200 mmram adjustment:160 mmheight over floor:5,9 mheight beneath floor:0,6 mpower requirement:32,0 kWweight:59,0 tdimensions (WxDxH):3,0 x 2,2 x 6,5 mclutch:pneumatisch overload protection in ram:hydraulisch ram adjustment:motorisch ram counterbalance:pneumatisch
: neu : ca. 12 Wochen ab Auftrags : Türkei : 6500 €: 125.45 €: 60 to: fix : 250 mm: 1040 mm: 180x120 mm: 4 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 800 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
Rodcraft WP100P pneumatic hydraulic press – 100 tons Brand: Rodcraft Model: WP100P Capacity: 100 tons Drive: Hydraulic with pneumatic control Description A Rodcraft WP100P vertical hydraulic press is offered for sale, intended for pressing, straightening, mounting and dismounting operations of bearings, bushings, shafts and other mechanical components. Due to its robust construction and 100 tons of pressing force, the equipment is suitable for mechanical workshops, industrial maintenance activities and production applications. Technical characteristics Model: Rodcraft WP100P Maximum pressing force: 100 tons Hydraulic drive Pneumatic control Height-adjustable work table Reinforced industrial frame Pedal control included Equipment condition The press is complete and is in good general condition. The equipment requires checking and fixing the pneumatic control system bef ...
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x
: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 €: 504.24 €: 1 : 40 to: 1500 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 2000 mm: 950 mm: 1900 mm: 1800 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1.250 € 
