Fabricante:
(Categoria: 101)
Viagem X/Y/Z: 700mm/500mm/600mm, velocidade: 6300rpm, potência: aprox. 10kW, alimentação X/Y/Z: 4m/min, passagem rápida X/Y/Z: 10m/8m/10m/min, dimensões da máquina X/Y/Z: aprox. 4500mm/2300mm/2500mm, peso: aprox. 6000kg, horas de funcionamento: 65425h. É possível uma inspeção no local.
Oferta 25118 Especificações: - Capacidade de torneira aprox. M 3 - M 8 - Faixa de trabalho (raio de giro) aprox. 1800 milímetros - Cabeça multi-posição - Velocidades: 8 - 700 rpm - Montagem rápida da ferramenta tamanho 1 dia.19 - Conexão pneumática 6 - 8 bar - Base de mesa H 900 mm - Necessidade de espaço aprox. L 1000 x A 2000 x P 1000 mm - Peso aprox. 100 quilogramas
x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mmB-axis: 0 - 161,955 °C-axis: 360 °spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/minspindle power: max. 35 kWmax. torque on the spindle: max. 130 Nmfeeds -stepless-: bis 20.000 mm/minrapid traverse X/Y/Z axis: 80 / 50 / 50 m/minrapid traverse B-axis: 40 U/minC-axis rapid feed: 50 U/minno. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 40 bartotal power requirement: 52 kVAweight of the machine ca.: 6 t= 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter deviceThe data for this ad was created with ModulMWS - the software solution of Log ...
bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 4 table-size: 500 x 400 mmspindle turning speed range: 75 - 3.010 U/minfeed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/Uquill stroke: 150 mmvoltage: 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 0,70 x 1,00 x 1,95 mthreading device: - Serial-No.: 138050673- Electromagnetic feed- Threading device- Machine vice 150 mm- Two clamping screws 14 mm- 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3- Cutting oil sprayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 245 mmbore stroke: 135 mmspindle taper MT: 3 table-size: 410 x 380 mmspindle turning speed range: 10 - 2100 U/minvoltage: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,7 x 1,8 x 1,75 mthreading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 13 mm
Fabricado na Alemanha Chuck de perfuração: B 16 Velocidade: 480 - 4.000 rpm
Controle Ultimax 3-4 2 telas coloridas (texto + gráficos) Curso X/Y/Z 1020/510/610 milímetros Velocidade 8000 1/min Revista de ferramentas para 24 Wkz. SK 40 DCF Software
Mikron WF31D Fresadora e Furadeira de Precisão Máquina com cavacos e cabine de proteção contra salpicos Equipado com um controlador Heidenhain TNC355 Especificações Técnicas A WF 31 D é uma fresadora e furadora de precisão para produção em série e treinamento CNC. Acionado por uma caixa de velocidades de mudança automática e correias Poly-V. O eixo vertical pode ser estendido em 90 mm; Possibilidade de conversão de maquinação vertical para horizontal. Parafusos de esfera com drives DC permitem movimentos de alimentação simultâneos. As guias estão protegidas contra poeira, lascas e líquido de arrefecimento. Especificações Fabricante: Mikron Tipo WF31D Controle: Heidenhain TNC 355 Movimento longitudinal (X): 560 mm Movimento transversal (Y): 500 mm Movimento perpendicular (Z): 400 mm. Potência de acionamento: 3.3/4.0 kW Faixa de velocida ...
thread dia.: M16 - M42 metrisch: 50 - 200 U/min.working area: max. 1300 mmengine output: 1,2 kWweight: 105 kgdimensions: 0,85 x 0,85 x 0,3 mmElectric tapping machines for M16 - M42 threads,Angle adjustable.8 pcs. Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacidade do furo em aço (diâmetro): 50,0 mmcomprimento do braço: 1.350 mmaltura máxima da peça: 1630 mmvelocidades de giro: 19 - 1320 U/minfusos furados - Morse Taper: 5 MKpotência do motor: 5,5 kWpeso: 5 tgama L-W-H: 2,4 x 1,0 x 3,55 mmmovimento de alimentação: 475 mmtamanho da placa de chão:: 1650x1000 mmalimentação: 0,07-2,9 mm/U
Dimensões (L, W): 1000 x 800 mmPara venda são 51 paletes de máquina para Burkhard e Weber MCR 120
Controlador CNC: HEIDENHAIN ITNC 530 Eixos Curso do eixo X mm: 700 Curso do eixo Y mm: 700 Curso do eixo Z mm: 700 Distância nariz eixo - superfície da mesa mm: 100 - 800 Travessia rápida m/min: 60 Aceleração nos eixos m/s2: 6 / 6 / 5 Mesa de trabalho Número de paletes: 2 + 5 Dimensões da mesa mm: 500 x 500 Tamanho máximo da peça (D x H) mm: 800 x 1.000 Peso máximo da peça kg: 600 Versão T-Slot: DIN 55201-A2 Tempo APC s: 9,5 Divisão estandar Grados: 360º (1º) Eixo Velocidade do eixo rpm: 18.000 Potência de acionamento do eixo kW: 34 / 28 Torque do eixo Nm: 110 Sistema de ferramentas Suporte para ferramentas: HSK-A63 Ranhuras para revistas de ferramentas: 120 Diâmetro máximo da ferramenta: 80 Comprimento máximo da ferramenta mm: 550 Peso máximo da ferramenta kg: 12 Tempo de chip-to-chip: 2,9 Equipamentos Volante e ...
x-travel: 11500 mmy-travel: 4500 mmspindle diameter: 200 mmw-axis: 1600 mmz-axis: 2000 mmRotary table: 3000 x 4000 mmtool adaptor: 80 tbed length: 4600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mincl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 800 mm W-axis travel: 1250 mm rotating range B-axis from: 0 ° rotating range B-axis up to: 360 °WORKING RANGE -BORING- drilling depth (max): 800 mm drilling capacity full bore (steel): 25 mmSPINDLE / HEAD tool fixture: HSK A50 drive power: 15 kWAXIS DRIVES feed velocity (max): 15000 mm/minTOOL MAGAZINE number of positions: 20 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5600 mm space requirements -front/back-: 4910 mm total height: 2700 mm total weight approx.: 10800 kg20 toolstationswith rotating table 800x600approx 46300hIncluding chip conveyor and various tool holders
Controle HEIDENHAIN TNC 430 Velocidade do eixo 20 - 9.000 1/min Curso X= 500, Y= 400, Z= 400 mm Porta-ferramentas SK 40 Trocador de ferramentas com 16 estações Mesa rotativa com eixos B e C Superfície de fixação Ø 700 x 500 mm Carga máxima da mesa 200 kg Medição de peças de trabalho com sonda de infravermelho
spindle diameter: 135 mmx-travel: 1000 mmy-travel: 700 mmz-travel: 300 mmcross rail adjustment - vertical: 780 mmdistance between table/spindle: 1000 mmtable surface area: 1100 x 842 mmdistance between columns: 1100 mmtable load: 1500 kgtool taper: SK 45 spindle turning speed range: 2400 U/minspindle drive: 5,9 kWfeed range: 1 - 6000 mm/minweight of the machine ca.: 10,6 tdimensions of the machine ca.: mRetrofit / overhauling in May 2005 (with geometric measurement):- New Heidenhain iTNC-530 control- New electronics- New Siemens servomotors- Heidenhain glass scales- Revision of drilling spindle unit(total costs € 118,436.00)Equipment:Infrared measuring probe m&h 38.10-MINIElectron. HandwheelVarious tool holdersTransport dimensions:- Machine (LxWxH) 3500 x 2600 x 2750 mm- Control cabinet (LxWxH) 2300 x 600 x 2300 mm- Hydraulic (LxWxH) 800 x 600 x 1000 mmThe data for this ad was create ...
Especificações: - Capacidade de perfuração em madeira 40 mm - Capacidade de perfuração em aço 18 mm - Porta-fusos de perfuração MK 2 - Curso da lula 120 mm - Velocidades do fuso de perfuração infinitamente variáveis em passos - 60 - 2840 rpm - Tabela de distância máxima – eixo de perfuração 600 mm - Lança / unidade inclinável esquerda + direita 45 cada - Lança / unidade giratória esquerda + direita - Tamanho da mesa: 450 x 450 mm - Acionamento 400 V / 0,33 / 0,55 kW - Necessidade de espaço aprox. L 500 x A 1870 x P 1200 mm - Peso aprox. 150 quilogramas
Centro de Maquinação CNC Hedelius BC 100 P-3500 Magnum Controle: Siemens Sinumerik 840D Viagens: Eixo X 3.500 mm Eixo Y 1.000 mm Eixo Z 770 mm Área de fixação 4.150 x 1.000 mm T-slots 5 peças Distância T-slots 200 mm Altura da mesa acima do piso: 730 mm Carga da mesa: aprox. 4.000 kg Montagem: DIN 69871 SK 50 Carregador de ferramentas: 50 – compartimento Velocidade do eixo: 20 - 4.500 rpm Acessórios - Automação de portas - Operador portátil - Exaustor da máquina -Transportador
x-travel: 800 mmy-travel: 400 mmz-travel: 350 mmtotal power requirement: 40 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 700 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M6 - M22 mm: 60/200 U/min.: 105 Nmair pressure: 6 - 8 barworking area: 400 - 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core drilling diameter max.: 18 mmbore depth: 320 mmswing diameter: mmtotal power requirement: 33 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core drilling diameter max.: 50 mmbore depth: 2000 mmswing diameter: mmdrilling capacity diameter max.: 110 mmtotal power requirement: 30 kWweight of the machine ca.: 10 tDrilling Ø, approx. 2 - 50 mmBoring Ø, approx. 100 mmDrilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mmStroke of drilling slide, approx. 4,000 mmDistance between the two spindle heads 5,000 mmHeight of centres above guideways 350 / 450 mmDrilling feed of drilling slide, infinitely variable 20 - 200 mm/minQuick feed of drilling slide 2,500 mm/minSpindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kWDrive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kWTotal electrical load, approx. 60 kW - 380 V - 50 HzTotal length of machine / guideways 7,500 / 5,000 mmWeight, approx. 10,000 kgAccessories / Special Features Machine consists of the following elements: Main spind ...
: 0 : 0 potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mPC placa de perfuração m/c, fuso único, projektor.
spindle diameter: 130 mmx-travel: 3000 mmy-travel: 2000 mmtotal power requirement: 4,5 kWweight of the machine ca.: 30 tSpindle Ø 130 mmSpindle taper SK 50Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mmLower table 3,300 x 2.400 mmMax. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mmFeeds 0.9 - 2,000 mm/minQuick feed for headstock and column 5,000 mm/minQuill feed 0.5 - 1,200 mm/minSpeed range, partially infinitely variable 4.5 - 1,250 rpmWeight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. ...
diâmetro do eixo: 105 mmx-curso: 1250 mmy-curso: 1000 mmz-curso: 600 mmcomprimento da mesa: 1100 mmlargura da mesa: 900 mmadaptador de ferramenta: 50 ISO / MKrequisito de potência total: kWpeso da máquina ca.: tBroca de mesa CNC, recondicionada 2002, BOSCH CC 300
workpiece diameter: 125 mmgrinding depth: 50 mmclamping length: 2000 mmtotal power requirement: 0,5 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding MachineModel ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278_______________________________________________________Distance between centres 50 – 2.000 mmHeight of centres approx. 125 mmWorkpiece Ø in clamping Vice 8 – 125 mmSwing of workpiece over tailstockguide 290 mmSwing of Workpiece max. over grinding head pillar 300 mmMax.weight of workpiece 250 kgMax. centre hole taper Ø 2 – 50 ...
table length: 2000 mmtable width: 1800 mmtable load: 12,5 ttotal power requirement: 10 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: mTable size approx. 2,000 x 1,800 mmMax. weight of workpiece, approx. 12,500 kgTable travel, longitudinal 1,250 mmTable height above floor 920 mmLongitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/minLongitudinal quick feed 2,000 mm/minTurning quick feed, with Ø 1,000 mm 3,150 mm/minWeight of machine 7,500 kgExternal dimensions of machine 3,700 x 2,100 x 920 mmTotal electrical load 10 KW - 180 V - 50 HzAccessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle.Condition : Satisfactory to good. Machine can be inspected under power.Delivery : ...
bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mPrecise table drill:- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 350 mmz-travel: 350 mmtotal power requirement: 15 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
