Fabricante:
(Categoria: 108)
In working order Table diameter (excluding clamping jaws): 135 cm Tree dimensions: height: 310 cm Length: 380 cm Width: 90 cm Features: Mobile control box Fuse box Vertically and horizontally adjustable column Tilting clamping table90 degrees ESAB Powermig welding machine Excluding pictured extraction. Auction-ID: A1-41995-10
Maximum force 470 daN Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-3
300 amps max. unused Auction-ID: A1-40418-148
DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-21
Water-cooled multi-process welding machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 60% duty cycle (250 A) Equipped with: LCD color display Equipped with: water cooler for MIG/MAG torch Includes: water-cooled MIG/MAG torch Including: TIG torch with accessories Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging Auction-ID: A3-43525-543
Sold without central suction block (disassemble at the level of the first aluminum pipe). Auction-ID: A1-46437-63
Sold without central suction block (disassemble at the level of the first aluminum pipe). Auction-ID: A1-46437-67
According to photos, weight estimated Auction-ID: A1-45666-33
According to photos, weight estimated Auction-ID: A1-45666-35
Sold with cooling block and electrical control cabinet ARO AS IBOX PA from 2014. New welding head in the amount of 4800€ Auction-ID: A1-46437-58
According to photos, weight estimated Auction-ID: A1-45666-36
Sold without central suction block (disassemble at the level of the first aluminum pipe). Auction-ID: A1-46437-70
According to photos, weight estimated Auction-ID: A1-45666-34
Sold without central suction block (disassemble at the level of the first aluminum pipe). Auction-ID: A1-46437-62
Sold without central suction block (disassemble at the level of the first aluminum pipe). Auction-ID: A1-46437-69
Sold without central suction block (disassemble at the level of the first aluminum pipe). Auction-ID: A1-46437-64
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...
Sold without central suction block (disassemble at the level of the first aluminum pipe). Auction-ID: A1-46437-68
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mm Special item: Hardness not achieved and a blemish on the surface Specifications:- High-quality S355J2+N steel + plasma nitriding- Material thickness approx. 24.5–27 mm- Hole diameter 28 mm- Surface hole pattern 100x100 mm grid- Corners, edges, and holes rounded- Side panel height 200 mm- Hole spacing on side panel 50 mm- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise setups- 6 feet - Standard configuration 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Combined laser machine for welding, cleaning and laser finishing. Equipped with a 1,500 W source and liquid cooling, it allows intense work cycles with high efficiency and high speed of execution. The 3 in 1 head allows a quick switch from welding mode to cleaning mode without complex operations on the machine. Including wire feeder and set of accessories: protective lenses x10, working nozzles of 10 different types Machine condition: unchecked. Approx. Transport dimension: LxWxH 1700 x 700 x 1600 mm; Approx. Weight: 250kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-200
Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-45834-294
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-65
Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-255
table length: 1000 mmtable width: 1000 mmtable height: 100 mmbore: 16 mmweight: 200 kg Special offer: Exhibition use – slight scratches on the surface Features:- Surface holes in a 50x50 mm grid- Holes in the side panels in a diagonal grid- 4 feet – standard configuration 750 mm- Through-hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 – 13 mm- Side panel made of high-quality steel S355J2+N + plasma nitriding- Hole Ø 16 mm- Corners, edges and holes rounded- Side panel height 100 mm- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise set-upsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-45834-243
1.000 € 
