current capacity: 8,0 kVA throat: 80 - 480 mm contact pressure capacity: 17 - 235 daN horn spacing: 140 mm mm rated capacity: 8,0 kVA voltage: 380 V total power requirement: 17,8 kVA weight of the machine ca.: 77,5 kg dimensions of the machine ca.: 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-
Spot welding machine DALEX type SL 16 EAMasch. No. 68611900-5 Year of construction 1986Nominal output at 50 % ED 16 KVASwelding capacity max. 50 KVA charge max. 500 mmElectrode force max. 17 - 278 daNElectrode arm 45 mmElectrode holder 25 mmArm spacing 140 mm / 280 mmCircuit breaker 8 stagesControl 4 times with single and series pointsOperating pressure 1-6 barOpen circuit voltage 1.8 to 3.6 voltsConnected load 37 kVANnet connection 400 volts, 50 Hz- Triggering of the welding cycle via
Cooling unit water recooling unit DALEX type DRF 2Masch. No. 38913719 year of construction 1989Volume flow 0.35 m3/hCooling capacity 1950 wattsOperating pressure 2 to 3 barRefrigerant R 134a Device has been converted from R12 to R134aOperating overpressure 18 barPipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litresMains connection 380 volts, 50 HzSpace required L x W x H 900 x 800 x 1020 mmWeight 100 kgGood condition; used
Tig welding machine DALEX type GL/W 201TIG welding machineMachine no.: 201 0447 Year of construction approx. 1995Power 200 Amp. 35% ED 160 Amp. 60% ED 120 Amp. 100% EDEinfinitely variable adjustment rangeType DC - DCmains connection 400 Volt, 50 Hz, 5.9 kVA, 32 Amp. Plug- 2-stroke and 4-stroke welding device- TIG hose package 8 meters- HF ignition- Shielded gas pressure reducer- Electrowelding for rod electrodes- Fan cooling- Connection socket for foot switch (without foot switch)Space requirement L x W x H 850
Key data: 16 kp, 200 , 390
Potência nominal a 50% DE: 16kVA Corrente de curto-circuito: 20,7kA Força do eletrodo: 65-390daN / curso único Garganta: 200mm --- Controlo de soldadura: MPS 10beta (5 vezes, 8 programas) --- Incluindo opções adicionais: - Pedal - Comutador de tomadas de transformador de 8 posições + interruptor principal - Mesa de máquinas --- Garantia de 6 meses --- Treino + comissionamento a pedido --- Eletrodos de soldadura por pontos + peças sobressalentes disponíveis em stock
Various spot welding machines and a Dalex cooling unit are available. 1) 2x spot welding machine Dalex PL 80-1, rated power (50%): 80kVA, max. welding power: 245kVA, max. short-circuit current: 35kA, primary voltage: 380V, open-circuit voltage: 8.44V, cooling water quantity: 10l/min, electrode force range: 100daN-600daN. 2) Spot welding machine Dalex PMS 10/1, rated power (50%): 32kVA, max. primary short-circuit current: 30kA, primary voltage: 380V, open-circuit voltage: 4.6V, electrode force range: 65daN-390daN. 3) Spot welding machine Dalex SL 16/EA, rated power (50%): 16kVA, connected load: 37kVA, secondary short-circuit current: 17kA, electrode force range: 17daN-278daN, open-circuit voltage: 3.6V, weight: approx. 200kg. 4) 2x spot welding gun Dalex RS 11 and 3136. 5) Water cooling unit Dalex DRF 4, year of manufacture: 1989, refrigerant: R22, filling weight: 3.5kg, volume flow: 1.3m ...
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Dalex, 2 coupled spot welding machines, with storage table -Type: SL 25/EA -Rated power: 25 kVA each -Projection: 600 mm -Intermediate dimension: up to 1590 mm -Operation: via foot pedal -Individual components: see photos -Dimensions: Machine 2140/1160/H1220 mm / Table 1565/1075/1140 mm -Weight: 535 kg / 112 kg
Balancer, machine balancer -Type: D5-45 -Load capacity per piece: 30-45 kg -Rope length: 2 m -Quantity: 2 pieces available -Price: per piece -Own weight: 18 kg
TIG welding machine, welding machine, TIG welding machine -TIG welding machine AC/DC direct/alternating current -Hose packages: 3 -Max. welding current: 225 A -Air-cooled -incl. ground cable -Gas valve -Dimensions: 610/1270/H860 mm -Weight: 288 kg
Key data: 40 kp, 550 , 390
Potência nominal a 50% DE: 40kVA Corrente de curto-circuito: 26,2kA Força do eletrodo: 65-390daN / curso único Garganta: 250-550mm Cone de braço tubular Mk2, reto --- Controlo de soldadura: MPS 10 (5 vezes, 8 programas) --- Incluindo opções adicionais: - Footswitch com touchdown "desenergizado" - Comutador principal --- Garantia de 6 meses --- Treino + comissionamento a pedido --- Eletrodos de soldadura por pontos + peças sobressalentes disponíveis em stock
A Dalex CGL 222 é uma máquina de soldadura MAG usada para uso industrial, caracterizada pela robustez e versatilidade. Oferece 200 amperes de potência, ligação de 400 volts, funções de 2 tempos/4 tempos, ignição HF e funções de soldadura por pontos e intervalos, ideais para aplicações em oficina.
A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible.
Pistola de soldadura pontual --- Potência nominal a 50%ED: 22kVA Corrente de curto-circuito: 17kA Força do eletrodo: 360daN / curso único Projeção: 95mm --- - Braço do elétrodo AE/2/96g + C34/2/63g --- Controlo de soldadura: a pedido --- Balanceador de molas a pedido --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura por pontos + peças sobresselentes disponíveis em stock
Key data: 40 kp, 550 , 390
Potência nominal a 50%ED: 40kVA Corrente de curto-circuito: 26.2kA Força do eletrodo: 65-390daN / curso único Garganta: 250-550mm --- Controle de soldagem: MPS 10 (5 vezes, 8 programa) --- Incluindo opções adicionais: - Footswitch com touchdown "desenergizado" -Interruptor principal --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura por pontos + peças sobresselentes disponíveis em stock
Key data: 63 kp, 750 , 600
Potência nominal a 50%ED: 63kVA Corrente de curto-circuito: 26.3kA Força do eletrodo: 65-390daN / curso único Garganta: 450-750mm --- Controle de soldagem: MPS 15036 (5 vezes, 1 programa) --- Incluindo opções adicionais: - Footswitch com touchdown "desenergizado" -Interruptor principal --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura por pontos + peças sobresselentes disponíveis em stock
Unidade de alimentação para prensa de soldagem Dalex
A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.
current capacity: - kVA throat: - mm contact pressure capacity: - kp Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current capacity: 112 + Nebenleitung 63 kVA throat: . mm contact pressure capacity: . kp total power requirement: . kW weight of the machine ca.: 0,475 t dimensions of the machine ca.: . m The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Oferta 19013 Especificações: - Potência nominal a 50% ED 16 kVA - Potência contínua 13,5 kVA - Potência máxima de soldadura 63 kVA - Valores de solda chapa de aço 3,0 + 3,0 mm - Projeção aprox. 100 milímetros - Espaçamento do braço 130 mm - Força do elétrodo 280 daN - Consumo de ar em plena carga do alicate aprox. 6 l/min - Volume de água de arrefecimento aprox. 8 l/min - Ligação / carga ligada 400 V / 63 kVA - Necessidade de espaço aprox. L 500 x P 1000 x A 500 mm - Peso aprox. 50 quilogramas - com: - unidade de controlo separada AKZENT T 504-1 - Suporte suspenso com gimbal
Key data: 80 kVA, 350 mm, 600 kp
Potência nominal a 50%ED: 80kVA Corrente de curto-circuito: 45.4kA Força do eletrodo: 100-600daN / curso único Projeção: 350mm --- Controle de soldagem: MPS 100mono (8 vezes, 1 programa) --- Incluindo opções adicionais: - Suporte de elétrodo pré-montado -Interruptor de pé - Dispositivo de ajuste - Monitor de fluxo eletrônico - Interruptor principal + trocador de torneira do transformador de 4 vias --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura por pontos + peças sobresselentes disponíveis em stock
current capacity: 16 kVA throat: . mm contact pressure capacity: . kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tipo de Máquina: Máquina de Soldadura TIG Sistema CC e CA refrigerado a água Fazer Dalex Tipo TGKW 55 Tensão de ligação 2 x 400 volts Faixa de ajuste 3 – 225 amperes Ciclo de trabalho 60% ED a 225 amperes 100% ED a 175 amperes Configuração atual: 5 níveis de comutação Espessura máxima do material soldável 6 mm Transformador de arrefecimento por ventoinha incorporada Queimador de arrefecimento refrigerado a água Projeto de planta industrial móvel Fusível 32 Amperes Dimensões L x W x A 1.300 x 600 x 850 mm, incluindo gaiola de garrafa Peso aprox. 200 kg Idade aprox. 30 anos Condição testada em oficina, incluindo relatório de teste UVV Âmbito do sistema de soldadura de fornecimento com os seguintes acessórios: 1 peça Tocha de soldadura TIG WHW 20, 4 mtr. Cabo de terra de 1 peça 1 peça redutor de pressão 1 ...
TRANSFORMADOr de soldadura AR DALEX 50Hz 100kVA Potência nominal: 100kVA/50%ED Voltagem Prim.: 380V50Hz Tensão seg.: 8.2V Peso: 165kg
Substituição - fase de controlo para os antigos sistemas Dalex SF 16/25 1 vez limite de tempo de soldadura assíncronos S_21.91007.1
