Folding machine MB multipli-cas 524 Serial-No. 78261
Ersatzteile - Peça de Reposição MB Multipli 382 2 fivelas dobráveis para MB 382 Entrega de banda para MB 382 Inspeção de vídeo on-line por Skype-Video Ficaríamos muito satisfeitos com a sua visita - mais máquinas em stock disponíveis imediatamente - Pode ser inspecionado em stock Emskirchen / Nürnberg - Pode ser testado
Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464S Serial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Formato (cm): 35x45 Equipamentos / informações adicionais: Bolsos: 2 Tipos dobráveis: costura sinuosa, dobra ziguezague, costura dupla paralela, costura única Realização: Alimentador de aspiração do piso inferior: 30 000 folhas/h Alimentador de atrito: 20 000 folhas/h para costura paralela A4, 80 g/m2 Peso do papel: 40 - 250 g/m2 com dobra paralela simples Valores de ligação elétrica: Tensão da rede: 230V Consumo atual: máx. IOA
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V -Dimensions: 95/70/H35 mm -Weight: 0.4 kg
table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,6 - 6,0 U/min bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating ins ...
total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software ...
table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,5 U/min bore: 90,0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90,0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...
table load: 1000 kg table diameter: 900 mm turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Largura 52 cm Ano de construção 2002 Máquina dobrável automática de papel Controlo por computador com monitor Alimentador de estacas planas FSA 52 com cabeça de sucção 1ª estação: 4 bolsos dobráveis 52 cm Eixo da faca a jusante 2ª estação: 4 bolsos dobráveis 52 cm 3ª estação: 2 bolsos dobráveis de 38 cm Exposição do galpão Preço sob consulta. Entregamos e instalamos em todo o mundo!
usava
fivelas: 4 pcs max. tamanho do papel: 52 x 85 cm número de série: 984580044 velocidade: 200 m/min profundidade máxima 46,5 cm gramatura de papel 40-250 g/m² tamanho completo 10 x 12 cm
fivelas: 4 pcs facas: 0 pcs tamanho máximo do papel: 52 x 85 cm N° de série: 98979071 velocidade: 200 m/min tensão: 3 x 400 V frequência: 50 Hz dimensões: 3 x 1m + 1,80 x 1 m profundidade máxima 46,5 cm gramatura de papel 40-250 g/m ² tamanho completo 10 x 12 cm
Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4 + 4 sacos Farejador Saída disponível: Imediatamente
Correia transportadora plana sobre subestrutura de alumínio Comprimento da correia de transporte 260 cm, largura da correia 60 cm Com a regulação do montante Esteira transportadora móvel, sobre rodas
