Fabricante:
(Categoria: 108)
Electrode furnace: Capacity 10 Kg Inner dimensions (LxWxH) 135 x 80 x 480 mm Power 0.5 kw Connection voltage 220 - 240 V Adjustment device 30 - 180 degrees Weight 15 kg Dimensions L x W x H 600 x 250 x 200 mm Condition: never used / new (5) Auction-ID: A7-46642-176
Welding table accessories P-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of: Clamps: 5 Sk.100/350 mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175 mm Flat angles: 2 pieces. 350 x 250 mm Flat brackets: 2 pieces 275 x 150 mm Eccentric discs 2 pcs. 100mm Quick-release screws: 10 pcs. Number of 33 Lots Weight 52 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-46642-174
Welding table \"SIGMUND Professional 750 + plasma nitrided\" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides. Incl. basic foot equipment. Without accessories shown. Table length 3000 mm Table width 1500 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 1.5 t Dimensions L x W x H 3.0 x 1.5 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46642-26
Spot welding machine with - Water cooling - Foot operation Power Output 75KVA Projection 445mm Total power requirement 120KW Weight 850Kg see pictures Auction-ID: A7-46642-247
Container Rotating Device incl. foot switch and remote control Load capacity 5.0 t Workpiece diameter 303 x 2438 mm Feed speeds infinitely variable 0 - 1745 mm/min Wheel diameter 305 mm Wheel width 100 mm Total power requirement 0.5 kW Machine weight approx. 0.37 t Dimensions approx. 1.5 x 1.05 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46642-224
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-46642-96
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission - Hole in face plate 30mm, 20mm deep. - Documentation in English only. Table diameter 330 mm Table load 350 kg Swivel range 135 degrees Tilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variable Table load 120 kg. vertical Total power requirement 0.125 kW Condition: never used / new (5) Auction-ID: A7-46642-70
Welding-turning-tilting table - Wireless remote control - 2 x welding current transmission Table diameter 1000 mm Table load 1200 kg Swivel range 0 - 135 degrees Speed 0.1 - 1.0 rpm Total power requirement 1.5 kW Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-46642-74
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 250 amp welding current transmission Table diameter 300 mm Table load 50 kg Swivel range 90 degrees Speed 1 - 12 infinitely variable rpm Table load 50 kg vertical Total power requirement 220 kW Machine weight approx. 0.036 t Space requirement approx. 0.45 x 0.43 x 0.38 m Condition: never used / new (5) Auction-ID: A7-46642-91
Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 1300 mm Table width 800 mm Load capacity 1000 kg Lifting height 510 - 1550 mm Total connected load 1.5 kW Connection voltage 230 V Machine weight approx. 0.55 t Condition: never used / new (5) Auction-ID: A7-46642-27
10 pcs quick-release clamping bolts for 28mm system Plate thicknesses 25mm Quantity: 10 pcs. Hole diameter 28 mm Weight 10 kg Dimensions L x W x H, 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-46642-244
Set 1 - 33 pieces, 28mm system, consisting of: 12x quick-release bolts with twist lock short, without O-rings 4x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 2x Stop and Clamping Angle 175 L - Cast Iron 2x Stop and clamping bracket 300 G left - Nitrided 2x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 4x Professional Screw Clamp - Nitrided 2x Professional Screw Clamp 45°/90° - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5) Auction-ID: A7-46642-128
Basic Set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolts: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Hole diameter 28 mm Condition new Weight 29 kg Condition: never used / new (5) Auction-ID: A7-46642-135
Welding table / hole table with accessories: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t without pallet truck Condition: never used / new (5) Auction-ID: A7-46642-114
Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 2000 mm Table width 1000 mm Load capacity 2000 kg Lifting height max. 1525 mm Total connected load 1.5 kW Connection voltage 400 V Condition: never used / new (5) Auction-ID: A7-46642-2
Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Sanded surfaces, ground flat. Hole diameter: 28mm, holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Auction-ID: A7-46642-78
Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolts: 36 x 160511 Magnetic Bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Number of 106 Lots Weight 283 kg Condition new Hole diameter 28 mm Auction-ID: A7-46642-235
Special set 31 pieces, 28mm system, consisting of: 1x Tool Trolley 10x Staking Bolts 10x Ball Lock Pin 3x Professional Screw Clamp, 300 x 150mm 3x Professional Screw Clamp, 300 x 200mm 2x Professional Pipe Screw Clamp 180° 2x Professional Pipe Screw Clamp 45° Material: Burnished quality steel ATTENTION Tool is designed for 25mm table top thickness. Number of 96 Lots Weight 600 kg Condition new Hole diameter 28 mm Auction-ID: A7-46642-132
Roller trestle - Burner tripod - Continuous number - Footswitch - Instruction manual in English Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 50 - 2000 mm/min Weight 65 kg Total power requirement 0.6 kW Space requirement approx. 0.8 x 0.6 x 0.6 m Condition: never used / new (5) Auction-ID: A7-46642-28
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 400 amp welding current transmission Table length 400 mm Table width 400 mm Table load 0.2 t Table diameter 400 mm Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 100 kg. vertical Total power requirement 220 kW Machine weight approx. 0.065 t Space requirement approx. 0.56 x 0.42 x 0.46 m Condition: never used / new (5) Auction-ID: A7-46642-55
TEKA filter device filtoo , Volume flow 2500 m3/h Total power requirement 1.1 kW Machine weight approx. 80 kg Space requirement approx. 0.58x0.58x0.58 m Condition: never used / new (5) Auction-ID: A7-46642-157
Marking table with groove 22 x 22mm Table area 1600 x 800mm Table height 890mm Weight 800Kg see pictures Auction-ID: A7-46642-253
Features • Self-aligning for multiple diameters • Infinitely adjustable speed of the drive unit • Polyurethane coating of the rollers • Optimal load distribution (4 rollers/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces • High stability due to solid construction of the machine • CE certificate • Very good value for money • Remote control on the cable • Documentation in English Load capacity 5 t Workpiece diameter 300 - 2500 mm Drum diameter 250 x 100 mm Feed rate 100 - 1000 mm/min Total power requirement 0.75 kW Weight 0.6 t Dimensions L x W x H 1.5 x 1.0 x 0.6 m Condition: never used / new (5) Auction-ID: A7-46642-200
Welding helmet Protection level 9 -13 m Power supply 2 x CR2032 Weight 460 grams Dimensions 250 x 270 x 230 mm Condition: never used / new (5) Auction-ID: A7-46642-167
Welding turntable with - Quick-release chuck 65mm - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable Table diameter 180 mm Table load horizontal 10 Kg Table load vertical 5 Kg Chuck diameter 65 mm Speed 2 - 20 infinitely variable Swivel range 90 degrees Tilt adjustment: manual/mechanical manual Connection voltage 230 V Machine weight approx. 18 kg Space requirements approx. 300 x 300 x 300 m Condition: never used / new (5) Auction-ID: A7-46642-53
Roller trestle - Self-aligning - Left/right rotation - New control system - Foot pedal - Emergency stop facility Lifting capacity 20 t Workpiece diameter 1500 - 3500 mm Drum diameter 250 x 100 mm Feed rate 100 - 1400 mm/min Total power requirement 0.75 kW Machine weight approx. 2.5 t Dimensions LxWxH 2.5 x 1.5 x 1.5 m Auction-ID: A7-46642-5
129 € 
