Fabricante:
(Categoria: 102)
bar capacity: 210 mmcontrol: CNC turning diameter: 210 mmy-travel: 120 mmtotal power requirement: 41 kWCondition: usedSpecification: CNC lathe with - Multi-channel loading magazine Breuning/IRCO PROFlmat 65.8 PR270/8 Technical data:- Siemens 840D (NCU 573,.5, NC memory expansion to 3 MB)- C-axis on main and counter spindle- Thread cutting without compensation chuck- Electric shaft- Marposs (Brankamp) collision monitoring CMS100- 3D machine model for kinematic simulation in the CAM programming systemMain spindle D65:- Pliers holder for HAINBUCH clamping forceCounter spindle D60:- Same as main spindle- Stop device- Coolant flushing of counter spindleTurret (12 stations):- Bottom and top driven tools- Turrets 1 and 2- ‘Travelling tip’ control function for turret 2- Y-axis 120 mmAutomatic sliding doorPo ...
bar capacity: 210 mmcontrol: CNC turning diameter: 210 mmy-travel: 120 mmtotal power requirement: 42 kWweight of the machine ca.: 4,8 tCondition: usedSpecification: CNC lathe with - FMB turbo 8-80 XT/3200A loading magazine - alphaMAX automatic loading and unloading system with 6 axes Technical data:- Siemens 840D- C-axis on main and counter spindle- Thread cutting without compensation chuck- Electric shaft- Marposs (Brankamp) collision monitoring CMS100- 3D machine model for kinematic simulation in CAM programming systemMain spindle D65:- Pliers chuck for clamping HAINBUCH- Power chuck D210 with quick-change jaws, manufactured by SchunkCounter spindle D60:- Same as main spindle- Stop device- Coolant flushing of the counter spindleTurret (12 stations):- Bottom and top driven tools- Turrets 1 and 2- Control ...
turning diameter over bed: 820 mmturning diameter over slide rest: 575 mmturning length: 3300 mmcentre height: 410 mm: mmspindle bore: 125 mmspindle turning speed range: 7,1 - 1400 U/mintotal power requirement: 22,0 kWweight of the machine ca.: 6,0 tdimensions of the machine ca.: 6,3 x 1,6 x 2,0 mmLathes with:- Digital readout- Rapid traverse- Röhm 3-jaw chuck 315mm- 4-position tool post- 2 steady rests- Coolant system- Emergency stop device- Machine light- Chuck guard- 2 chip trays- Spare jaws (internal and external)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 €: 1 : 325 mm: 1000 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 M: 12 : 85 - 2.000 1/min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 75 - 2,5 Gänge/: 0.1 - 1.75 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdemo machine / mint conditionnet price (price for new machine € 21.690,00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",incl. following optional equipment:1 lenght stopFURTHER TURNING LENGT ...
faceplate diameter: 4770 mmswing diameter: 5300 mmturning height: 4130 mmfaceplate turning speed range -stepless-: 0,4 - 45 U/minfeeds infinitely variable: 0,1 - 4000 mm/mintable load: 100 tmain drive motor: 80 kWControl: Siemens 840D vertical Stroke: 3200 mmcross travel: 3600 mmram adjustment: 2000 mmram swivable +/-: 30 z-travel: 1950 mmtotal power requirement: - kWweight of the machine ca.: 125 tdimensions of the machine ca.: 15 x 9 x 13 mequipped with:- CNC control Siemens 840D- 2 Rams on Crossbeam- Pickup magazine with 8 tool holder positions- Automatic clamping of the tool holder in the ram- 1x straight boring head- 1x 90° angle head (not in the pickup magazine)- 1x set of jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2150 mmturning diameter over slide rest: 1800 mmturning length: 10000 mmspeed: 1 - 300 U/minfaceplate diameter: 1800 mmspindle bore: 200 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate Ø 1800 mm- 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m- 4-way toolpost- tailstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine No. 1124, turning length approx. 1500 mm, turning diameter over support approx. 200 mm, turning diameter over bed approx. 400 mm, spindle bore approx. 58 mm, speed range 50 - 2000 rpm, 3-jaw chuck diameter 200 mm, digital display Easson ES-8 (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! There are no pallets available for dismantling and loading the item, other packaging material on site and the buyer has to rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary!) Auction-ID: A7-43007-34
spindle travel: 3000 mmspindle stroke - max.: 330 mm: 2820 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing over bed: 730 mmcentre distance: 3000 mmcontrol: Heidenhain MANUALplus4110 total power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 7400 x 2100 mmVery well-maintained cycle lathe with only 15652 operating hours.Working area:Center distance 3000 mmSwing diameter over bed 730 mmSwing diameter over cross slide 450 mmBed width 480 mmMain spindle:Spindle mount according to DIN 55027 size 11Spindle bore 130 mmSpindle diameter at front bearing 170 mmSpindle taper 1:20Tap in center sleeve MT 6Main drive:AC drive with 2-stage ZF gearbox (automatic shifting gearbox)Drive power (100/60% duty cycle) 22/28 kWTotal speed range 1 - 2200 rpmMaximum spindle torque: approx. 2200 NmX-axis (cross slide) performance data:Maximum travel: 400 mmFeed force: 14 kNSpeed: 4 m/minZ-axis (bed slide) performance data:Feed force: 18 kNSpeed: 7 m/minMax. workpiece weight:Between ...
Center width: approx. 1000 mm, rotation diameter over bed: approx. 410 mm, circulation over face slide: approx. 250 mm, spindle bore: approx. 52 mm, speed range: multi-stage, approx. 40 - 2,000 rpm Auction-ID: A7-42447-310
Max. Turning length: 6.020 mmcentre height: 550 mmcentre distance: 6.000 mmmax. swing over bed: 1.100 mmmax. swing over facing slide: 730 mmmax. tool weight: 6.000 kgSpindle diameter in forward position: 178 mmfaceplate diameter: 1.000 mmspindle bore: 128 mmtailstock quill taper MT: 6 diameter of quill: 140 mmmax. chucking diameter: 500 mmLathe - cycle-controlled | WEILER - E110 equipped with a PARAT tool system as well as a chip conveyor.A comprehensive tool package, including several steady rests and a heavy-duty boring bar holder, is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time in the Swiss factory location.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ...
turning diameter: 640 mmturning length: 1.185 mmcontrol: SINUMERIK 840D swing diameter: 640 mmdistance of spindle heads: 1500 mmslide I:: X1 / Y1 / Z1 / B slide travel X-axis: 550 mmslide travel Z-axis: 180 mmZ- Travel: 1.185 mmB - axis: 240 °feed x-axis: 0 - 40.000 mm/minfeed y- axis: 1 - 24.000 mm/minFeed z- axis: 1 - 70.000 mm/minfeed B-axis: 1 - 20 1/minrapid traverse X/Y/Z: 40 / 24 / 70 m/minfeed capacity X/Y/Z: S6: 7,00/11,00/7,50 kNtool taper: HSK 63 turning speed milling-spindle: 10 - 12.000 1/minpower capacity at 100 % load: 13,20 kWpower capacity at 40 % load: 22,00 kWtorque milling spindle: 60 / 100 Nmtool magazin:: no. of workpieces in the magazine: 46 Stücktool length - max.: 350 / 200 mmtool diameter: 80 mmwotkpiece diameter with 2 vacant positions: 120 mmweight of tools max.: 6 / 10 kgslide II:: X2 / Z2 slide travel X-axis: 180 mmZ- Travel: 1.050 mmfeed x-axis: 1 - 24.0 ...
turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 840D SL swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 820 mmturning length: 6000 mmturning diameter over slide: 520 mmHolder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: 8-1600 U/minbed width: 560 mmspindle bore: 128 mmfaceplate: 600 mm3 jaw chuck Forckrath: 400 mmsteady: 250-500 mmchip conveyor: diameter of quill: 125 mmquill stroke: 280 mmtotal power requirement: KVAweight of the machine ca.: 12 tdimensions of the machine ca.: 9,5x2,5x2,5 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us ...
faceplate diameter: 2000 mmturning diameter: 2500 mmturning speeds: 0,5-100 U/minmax. workpiece weight -without tailstock: 6000 kgmax. workpiece weight between centres: 25000 kgPlate area: mmturning diameter in the pit: 3200 mmtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: 22x5x4 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data fo ...
turning diameter over bed: 1100 mmturning diameter over slide rest: 740 mmturning length: 6000 mmspindle bore: 110 mmturning speeds: 16-1600 U/mindigital readout: faceplate: mm3-jaw chuck: steady: total power requirement: 22 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mYear of manufacture 1999Control: Siemens 840DTurning length (mm) 6000Max. turning diameter (mm) 1100Max. turning diameter over slide (mm) 740Spindle diameter (mm) 105Speed 16 - 1800 (18x)kW 22Voltage 380VHz 503-jaw chuck ø (mm) ¦4-jaw chuck ø (mm) ¦Fixed steady rest ø (mm) 2xThrough-spindle cooling ¦Multifix tool postThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More ...
turning diameter over bed: 1100 mmturning diameter over slide rest: 800 mmturning length: 5000 mmlength of gap: 600 mmsteady: 360 mmturning diameter in the gap: 1500 mmspindle passage: 105 mmfaceplate: 800 mmturning speeds: 8-800 U/minbed width: 550 mm3-jaw chuck: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your vi ...
turning diameter over bed: 540 mmturning diameter over slide rest: 340 mmturning diameter in the gap: 800 mmlength of gap: 350 mmturning length: 3000 mmturning speeds: 40-1800 U/minbed width: 340 mm3-jaw chuck: 255 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was ...
bed width: 190 mmdaylight: 120 mmcentre height: 220 mmdimensions of the machine ca.: 0,4 x 0,15 x 0,5 mweight: ca. 20 kgAdditional bezels available upon request - Photo 2.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
turning diameter: mmswing diameter: mmturning height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
550 € 
