Fabricante:
(Categoria: 102)
IVW Industriegüterverwertung GmbH Gebrauchtmaschinenhandel
x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 375 / 560 mmturning length: 600 mmcontrol: HURCO x-travel: 220 mmy-travel: +/- 55 mmz-travel: 670 mmW-axis (spindle longitudinal): 740 mmturret (x-stations): 12 x VDI 40 spindle passage: 81 mmtotal power requirement: 70 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 5,5 3,5 3 mPrice EXW / from foundation Takeover before 20 February 2026The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 390 mmturning length: 2250 mmcontrol: Sinumerik 840D swing diameter: 610 mmcross movement. (x-axis): 605 mmlongitudinal traverse (z-axis): 1.870 mmy-axis: 210 mmb-axis: 240 °Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mmLongitudinal travel (Z3): 1.840 mmmain spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: max 82 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 82 mmDiameter in front bearing: 180 mmCounter spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: 92 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 104 mmDiameter in front bearing: 180 mmMain spindle drives left and right: - power requirement: 45/47 kWspeed area: 20 - 3.200 1/minBuckling speed: 650 1/mintorque: 650/ 1.080 NmC-axis speed: 3.200 1/minTorque C-axis: 660 1/minPartial accuracy C-axis: 0,025 ° ...
bar capacity: 65 mmnumber of spindle speeds: 5.000 U/mincontrol: Siemens 840 D no. of tools in turret 1: 12 no. of tools in turret 2: 12 no. of tools in turret 3: 12 Stk./pcs.tool taper: VDI 30 driven tools turning speeds: 4.000 U/mintravel -x1 axis: 165 mmtravel -z1 axis: 220 mmtravel -x2 axis: 165 mmtravel -z2 axis: 150 mmtravel -x3 axis: 165 mmtravel -z3 axis: 650 mmtravel -y3 axis: 80 (+50/-30) mmCNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant.The machine is in a well-maintained condition and can be inspected at any time under power.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Sprint65Gildemeister | Sprint-65 | Spri ...
: gebraucht : 1999 : 1676 : prompt, Zwischenverkauf v : Spanien : 10500 €: 1 : 9500 €: 335 mm: 750 mm: 165 mm: 42 mm: 175 mm: 250 mm: DIN55022-5 Nr. 4 : 60-2000 (9) 1/min: 0.05 - 0.75 mm/U: 0.025 - 0.375 mm/U: 0.5 - 7.5 mm: 60 : 245 mm: 120 mm: 48 mm: 3 MK: 140 mm: 2.2 kW: 1800 mm: 850 mm: 1485 mm: 880 kg3-Jaw chucks Röhm Dm. 300 mm4-fold steel holder with 4 insertsChuck protectionCranking length 120 mmSliding rotary guard with integrated machine lampRear chip splashboardCooling equipmentLead screw and draw screw coverFoot brakeUser Manual in EnglishCOMPLIES WITH GERMAN UVV &, AUSTRIAN AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 660/275 mmturning length: 1498 mmcontrol: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mm9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Islands and pocket program ...
turning diameter: 400 mmturning length: 1100 mmcontrol: Siemens Sinumerik 840D SL greates pass round over bed: 500 mmSwing dia. over traverse guideway: 370 mmMain spindle:: Max. rpm: 5000 min/-1power capacity - main spindel: 17 / 25.5 kWmax. Torque: 345 Nmspindle diameter in front bearing: 130 mmspindle bore: 67 mmchucking diameter: 325 mmspindle nose: A8 axis stroke:: x-axis: 750 mmy-axis: +/- 100 mmz-axis: 1200 mmfeeds:: rapid traverse: 40 / 40 / 40 m/minTailstock:: tailstock: 1200 mmtaper of center: Mk 5 tension force: max. 8 kNmilling head: b-axis: +/- 120 °tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/minspindle motor: 10,5 kWmax. torque on the spindle: 90 Nmtotal power requirement: - kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 4,6 x 2,5 x 2,82 mEquipped with:- Siemens 840D SlimLine / Celos CNC control- 3-jaw ch ...
faceplate diameter: 1250 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: Siemens 840D travel -x axis: -80 / +1100 mmtravel -z axis: 1060 mmworkpiece height max.: 1400 mmmax. workpiece weight: 8000 kgShank diameter: 200 x 240 mmtable turning speeds: 2- 400 U/mindrive capacity - spindle motor: 44 kWmax. torque on the faceplate: 14510 Nmrapid traverse: 12 m/minturning speed range - milling: 0,01 - 7,4 U/minspeeds of tool: 4 - 3000 U/minwork piece power: 22 kWTorque: 840 Nmtotal power requirement: 90 kVAweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC control Siemens 840Dsl- C-axis- driven tools- tool changer 12-fold (driven tools)- complete enclosure- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 900 mmtravel -y axis: 200 mmtravel -z axis: 800 mmB-axis swival range +/-: +90 / -20 °positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315The machine is in very good condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PV315 | PV-315The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 400 mmturning length: 1.000 mmcontrol: EPL 2 greates pass round over bed: 400 mmSwing dia. over traverse guideway: 225 mmtravel -x axis: 260 mmtravel -z axis: 1.040 mmMain spindle:: turning speed range - main spindle: 20 - 4.000 min/-1power capacity - main spindel: 11 kWmax. Torque: 75 Nmspindle bore: 72 mmchucking diameter: 185 mmspindle head: 140H5 spindle diameter in front bearing: 100 mmturret:: number of toolpositions: 12 pos.Tailstock:: diameter of quill: 80 mmquill stroke: 100 mmtaper of center: MK 4 pressure: max. 800 daNfeeds:: rapid power traverse in X-and Z direction: 10 m/minFeed speed: x: 5 m/min.Feed speed: z: 5 m/min.Feed force: x: 500 daNFeed force: z: 800 daNtotal power requirement: 29 kWweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,6 x 2,1 x 2,0 mChip conveyor: Three Jaw Chuck: Documents: CNC - LatheGILDEMEISTER - NEF CT ...
working diameter: 140 mmturning diameter: 185 mmworkpiece length: 120 mmcontrol: Siemens turning speeds: 7.000 U/minVertical Turning Machine | FAMAR - BISUB 160 2GThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: BISUB1602G | BISUB160 2G | BISUB-160 2GThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chuck diameter: 500 mmswing diameter over bed slide: 700 mmcontrol: Siemens travel -x axis: 630 mmtravel -z axis: 500 mmCNC turning and milling center vertical | EMAG - VMC 450 MTThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 550 mmturning length: 900 mmcontrol: Fanuc O-TC total power requirement: kWweight of the machine ca.: 8165 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. working diameter: 610 mmmax. working lenght: 1.522 mmtravel -x axis: 740 mmtravel -y axis: 410 mmtravel -z axis: 1.838 mmcontrol: MAZATROL Fusion 640M Pro b-axis: 240 °c-axis: 360 °number of spindle speeds: 4.000 U/minspindle bore: 88 mmmilling spindle turning speed range: 12.000 U/minnumbers of positions in the tool changer: 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410HThe machine is in a well-maintained condition and can be inspected under power at any time in the factory location.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 HThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 140 mmturning length: 600 mmcontrol: Siemens 840 D PowerLinedistance between spindles: 615 mmMain spindle:: Max. rpm: 5.000 min/-1power capacity - main spindel: 20 / 27 kWmax. Torque: 105 / 145 NmC-Axis: 0,001 °chucking diameter: 140 - 160 mmspindle head: ISO 702/1 A5 max. bar capacity: 65 mmspindle bearing diameter: 110 mmSubspindel:: Max. rpm: 5.000 min/-1power capacity - Sub spindle: 20 / 27 kWmax. Torque: 105 / 145 NmC-Axis: 0,001 °chucking diameter: 140 - 160 mmspindle head: ISO 702/1 A5 max. bar capacity: 65 mmx-travel: 150 mmz-travel: 600 mmspindle bearing diameter: 110 mmturret:: Number of Turret: 3 pos.tool taper: VDI 25 x 48 DIN 69880number of toolpositions: 3x 12 pos.Number of driven toolspositions: 3x 12 pos.Spindle speed - driven tools: max. 6.000 min -1power capacity - driven tools: 8 kWmax. Torque: 16 Nmx-travel: 1/2/3: 110 mmz-travel: 1/2/3: 360 m ...
turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/mingripping station: 42 mmspindle: 1 kWturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders:5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 42 is without ...
faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmtable load: 20 tfeed range: 3000 mm/minmain drive motor: 70 kWmilling drive: 16,1 kWControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling headInspection under power in the factory possible.Machine location is Spain.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 5500 mmswing diameter: 6000 mmturning height: 4400 mmControl: FAGOR 8055 cross rail adjustment: 3000 mmram adjustment: 1500 mmworkpiece weight: 100 tfaceplate speeds:: 1 - 25 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m Retrofit in 2015 with CNC-control FAGOR 8055The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1220 mmturning length: 5000 mmcontrol: FAGOR 8055 TC swing diameter over bed slide: 880 mmspindle bore: 160 mmspindle turning speed range: 0 - 1000 U/mintransmission ratio: 4 tailstock quill diameter: 180 mmtailstock quill stroke: 260 mmmain drive motor: 40 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mIn 2020 overhauled:- Grinding of carriage guides on the X and Z axes- Preloading of X and Z axis ball screw nuts- New Turcite placed on the X and Z axis carriages- General review and disassembly of the engine and head regulator- General review and disassembly of the motors and regulators of the X and Z axes- Disassembly and inspection of the SAUTER tool holder- Checking and cleaning the electrical cabinet- Complete review of the hydraulic circuit CNC-control FAGOR 8055 TC Tool turret SAUTER 4-jaw chuck Ø 1000 mm 3-jaw chuck ...
turning diameter: 400 mmturning length: 549 mmcontrol: HEIDENHAIN Eltropilot swing over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmmain spindle speed: 25 - 5000 U/minmain spindle drive: 21 kWmax. torque on the spindle: max. 240 Nm: 120 mmc-axis, speed: 100 U/minC-axis: Haltemoment 200 NmC-axis resolution: < 0,04 °sub spindle bore: 56 mmsub spindle speed: 25 - 5000 U/minsub spindle drive: 9 kWmax. torque on the spindle: max. 72 Nm: 90 mmc-axis, speed: 100 U/minC-axis: Haltemoment 150 NmC-axis resolution: < 0,04 °feed power X/Z axis: 3,5 / 7 Nmrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mintool turret: 1 x 12 Stationennumber of driven tool stations: 12 speed of driven tools: 4.000 U/mintotal power requirement: 44 kVAweight of the machine ca.: 5,7 tdimensions of machine L x W x H: 3,65 x 2,03 x 2,1 mAccessories: collet fixture HAINBUCH on ...
turning diameter over bed: 280 mmturning diameter over slide rest: 160 mmturning length: 500 mmcentre height: 140 mmcentre distance: 500 mmspindle bore: 36 mmspindle turning speed range: 15 - 3550 U/minspindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,008 - 0,560 mm/Ufeeds - cross: 0,004 - 0,280 mm/Uthread - mm pitch: 0,2 - 12 mmdia. of leadscrew: 24 mmlead of leadscrew: 6 mmtailstock taper MT: 3 tailstock quill stroke: 90 mmtailstock adjustment out of the central pos.: 15 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,6 t- machine out of teaching shop -Accessories: DRO on 3 axis, 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head A, running centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 250 mmturning length: 600 mmcontrol: FANUC Series 31i-Model A travel -x axis: 180 mmtravel -y axis: +/-45 mm- - - - - Main spindle - - - - -: - - - - - -turning speeds: 0 - 5.000 U/minbar capacity: 65 mm--- Subspindle ---: - - - - - -turning speeds: 0 - 7.000 U/minbar capacity: 42 mm--- upper turret 1 ---: - - - - - -numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X1 / Y1 / Z1 St.Tools speed: 8.000 U/min--- upper turret 2 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Tools speed: 8.000 U/minNumber of axles: X3 /Y3 / Z3 St.--- lower turret 3 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X2 / Z2 St.Tools speed: 8.000 U/minCNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex ...
turning diameter: 1010 mmturning length: 6000 mmcontrol: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mmbed width: 750 mmsteady: 820 mmRotating speeds: 1100 U/minlength of gap: 500 mmsteady: 450 mmspindle passage: 104 mmworkpiece weight: 7000 kgmain drive: 52 kWturning speeds: 5-900 U/mintotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 262/01Machine number: 08122394Quick-change tool postCoolant systemMonitorChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If y ...
turning diameter: 1010 mmturning length: 6000 mmcontrol: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mmbed width: 750 mmsteady: 450 mmRotating speeds: 1100 U/minlength of gap: 500 mmsteady: 450 mmspindle passage: 104 mmworkpiece weight: 7000 kgmain drive: 52 kWturning speeds: 5-900 U/minlive tooling: total power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 262/01Machine number: 08122394Quick-change tool postCoolant systemMonitorChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for you ...
turning diameter over bed: 1250 mmturning diameter over slide rest: 1250 mmturning length: 9000 mmturning speeds: U/minfaceplate: 1300 mm3-jaw chuck: 500 mmsteady: 2 centre distance: 10.000 mmbed width: 1250 mmturning dia. in gap: 1600 mmtotal power requirement: 54 kWweight of the machine ca.: 33 tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your ...
turning diameter: 600 mmswing diameter: 680 mmturning height: 600 mmz-axis: 500 mmx-axis: 560 mmdrive of main spindle: 65/80 kWmain spindle speeds:: 2800 workpiece tool changer: 12 Plätzefeeds z-axis: 0,01-30.000 mm/minfeeds x-axis: 0,01-45.000 mm/minchuck: Rota NCR 630 mmcoolant: voltage: 400 Vfrequency: 50 Hzcontrol: Siemens 840 D pl total power requirement: 140 Aweight of the machine ca.: 18 tdimensions of the machine ca.: 6,5 x 3,8 x 4,20 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 540 mmswing diameter over face slide: 370 mmcentre distance: 3000 mmcentre height: 270 mmturning dia. in gap: 815 mmbed width: 344 mmspindle bore: 88 mmspindle diameter in front bearing: 133 mmspindle taper: 11 D1 Camlock turning speed range: 18-1400 U/minturning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mmface feeds: 0,03-0,5 mmmetric threading: 0,4-14 mminch threading: 2-72 G/1thread - module: 0,3-3,5 mmthread - DP: 8-60 Pitchtailstock quill diameter: 75 mmquill stroke: 230 mmtaper of tail spindle: MK 5 slide valve travel: 280 mmupper head travel: 150 mmOverall size: ca. 4700 x 1100 x 1400 mmweight: ca. 3200 kgpower capacity: 9,4 kWAccessories:3-axis digital display FagorRöhm wedge bar chuck Ø 315 mmMultifix steel holder size Cincl. 6 interchangeable cassettesRotating center pointTurning chuck guardRear chip guardCoolant deviceWor ...
turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 360 mmcentre height: 180 mmturning speeds: 70-2400 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 2000x1500x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 720 mmturning length: 2.000 mmcontrol: FAGOR 8055 turning diameter over slide: 470 mmfeed: 8 m/minspindle nose: DIN-55027-11 spindle passage: 104 mmnumber of spindle speeds: 0-1600 U/min/rpmspindle drive: 17/ 20.5 kWTorque: 1590/1920 Nmtotal power requirement: 28 kWweight of the machine ca.: 4.9 tdimensions of the machine ca.: 6.600 x 2.300 mmTailstockTailstock quill diameter: Ø 100 mmTailstock quill travel: 200 mmTailstock quill taper: Morse taper MT 6Turret4-position automatic turretMachine EquipmentFull rear protection enclosureHydraulic 3-jaw chuck SMW AUTOBLOCK 400 GHFixed steady rest, capacity 50–220 mmMaximum Permissible WeightsMax. workpiece weight between centers: 2,560 kgWith 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kgFree-standing, center of gravity at 250 mm: 800 kgThe data for this ad was created with ModulMWS - the software solution of Lo ...
