Fabricante:
(Categoria: 106)
pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 350 mmtable surface area: Arbeitsbreite 750 x 260 mmpressure: 221 baroil volume: 37 dm³work speed: max. 9,8 mm/secreturn speed: 14 mm/sectotal power requirement: 3 kWweight of the machine ca.: 385 kgInner diameter of the cylinder [mm]: 130Piston rod diameter [mm]: 55Diameter piston head [mm]: 80- Integrated pressure gauge- Pressure regulator- Hydraulic unit with variable speeds- Working table adjustable in height- Joystick to control piston and speedThe workshop press (30T) has a fixed cylinder and a highadjustable work table (motorized). Equipped with pressure regulation,Pressure gauge, variable speed and a joystick to move the piston up and downto move off. With this joystick you can also control the speedadjust, making this motorized hydraulic press perfect forprecision work is suitable.The data for this ad was created with ModulMWS - the software solution of Lo ...
pressure: 40 ttable length: 1280 mmtable width: 900 mmtotal power requirement: 7 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 2 x 3,6 m mNo. 5282Spotting press 400 kNREIS TUS 90 OK 40Working area: table 900 x 1280Column passage 930 x 705 mmTable top 900 x 1280 mmram plate 900 x 1200 mmInstallation height 1035 mmSpace requirement approx. 3 x 2 x 3.6 mTransport dimensions approx. 4 loading meters, width 2.20 / height 2.80Weight approx. 8 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tTable dimensions: 1000 x 360 mmvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mInclineable mechanical press withupdated electrics (CE2004) andbolster plates.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 2,5 kNstroke: 45 mmthroat: 90 mmWorking height from to: 80 - 220 mmtable surface area: 120 x 60 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x 390 mmHand presses with rack HZ 250The power is transmitted via a rack and pinion construction. she findstheir use where during the working process a constant pressureis needed.Precisely manufactured, spindle hardened and ground, unlimited service lifeLong spindle guide, optimal pressure performance,T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 kNstroke: 40 mmthroat: 73 mmWorking height from to: 60 - 150 mmtable surface area: 115 x 70 mmweight of the machine ca.: 10 Kg.Toggle lever hand press SPECIAL OFFER!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja weight of the machine ca.: 9,5 tserial number: 10457/2 : 160000 KGstroke of worktool slide: 41 Hub/minPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tdistance between columns: 650 mmstroke: 200 mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2500 mmplate thickness: 12,5 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mWidth of metal, max. 2,500 mmMetal thickness, max. 12.5 mmWeight, approx. 19,000 kgDrive 40 kWEquipment / Special Features:Adjustment of cutting gap.Hydraulic blank holder.Automatic arrester adjustment for cutting blanks.Program input and piece number input.Transportation device for blanks. Stacking device.This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine.Condition : Good to very good. Machine can soon be inspected under power.Delivery : Ex stock, as inspected.Payment : Net, after conclusion of contract.Thank you for your interest.The data for this ad w ...
distância entre colunas: 300 mmcomprimento da mesa: 3550 mmlargura da mesa: 190 mmaltura da mesa: 800 mmdistância entre colunas: 3230 mmbraço da coluna: 300 mmpeso da máquina ca.: 12,5 tdimensões da máquina ca.: 1600 x 3800 x 2800 m
pressão: 500 tlargura de passagem: 750 mmcurso: 120 mmrequisito de potência total: 57 kWpeso da máquina ca.: 16 tdimensões da máquina ca.: m
pressure: 75 tthroat: 280 mmstroke: 303 mmtotal power requirement: 15 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.
pressure: 8,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 27 Kgdimensions: 160 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 8,0 kNstroke: 40 mmthroat: 90 mmWorking height from to: 50 - 200 mmtable surface area: 120 x 160 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x410 mmKnee lever hand press with fine height adjustment SPECIAL PRICE!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 4,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 24 Kgdimensions: 160 x 230 mmDirect-acting pneumatic pressesbring the full pressure performance over the entire stroke length. You will above allused when long-stroke parts are machined with constant forceNeed to become.Convincing technology• Long and precise spindle guide for maximum dimensional accuracy• Hardened and ground piston rod for practically unlimited service life• Double-acting cylinders with end position cushioning on both sides• Double guide rings in the piston, constant and quiet running• Oil resistant sealing elementsSpecial features of the PND series• Spindle secured against twisting• Spindle return on the PND 85/S only via a cylinder chamber additional air savings• Easy, quick and prec ...
Força de perfuração: 110t, capacidade máxima de perfuração: 40mm/20mm, profundidade da garganta: 750mm, taxa de curso: 28/min, curso máximo: 80mm, altura de trabalho: 1066mm, dimensões da máquina X/Y/Z: aprox. 2300mm/1300mm/2300mm, peso: aprox. 4000kg. É possível uma inspeção no local.
Estão disponíveis quatro prensas de coluna única Neff. 1) Neff T 6.3, ano de fabricação: 1989, potência: 3kW. 2) Prensa de coluna única Neff, horário de funcionamento: 9097h. 3) Prensa de coluna única Neff EP 10, ano de fabricação: aprox. 1950. 4) Prensa de coluna única Neff. É possível uma inspeção no local.
ram capacity: 2000 treturn capacity: 150 ttable-size: 1015 x 1050 mmram head dimension: 975 x 1050 mmdist. between pillars (left to right): 975 mmdayligth: 1000 mmdistance table/ram: 600 - 1000 mmram stroke: 400 mmtable height over floor: 800 mmheight over floor: 3650 mmTable ejector: 63 KNRam ejector: 650 KNTable ejector stroke: 100 mmRam ejector stroke: 100 mmLenght of ram slide guiding: 1400 mm: Idle speed downward: 235 mm/sworking feed: max. 20 mm/secWorking speed at 10000 KN: 14 mm/sWorking speed at 20000 KN: 5 mm/sIdle speed upward: 250 mm/sovertravel time: 220 mssafety distance: 352 mmtotal power requirement: 194 kWweight of the machine ca.: 105 tdimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 mTechnical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector in table and pusher!The ...
Força de compressão: 2000kN, altura máxima de instalação: 550mm, requisito de potência total: 72kW, pressão de funcionamento: 210bar. Incluindo unidade de alimentação. É possível uma inspeção no local.
Força de compressão: 63t, pressão de funcionamento: 160bar, velocidade de pressão para baixo/para cima: 200mm/400mm/s, curso do carneiro: 500mm, profundidade da garganta: 360mm, distância máxima da mesa RAM: 800mm, peso: aprox. 4200kg. É possível uma inspeção no local.
Está disponível uma prensa para oficinas Sahinler. Pressão da prensa: 150t, pressão máxima: 244bar, largura de trabalho: 1520mm, curso do pistão: 300mm, dimensões do carneiro X/Y: 200mm/1520mm, através do furo: 100mm, dimensões da mesa X/Y: 600mm/1520mm, altura máxima de instalação: 610mm. Velocidade de avanço: 9mm/s, velocidade de retração: 10mm/s, velocidade de trabalho: 5mm/s, potência de acionamento: 11kW. Dimensões da máquina X/Y/Z: aprox. 2500mm/1000mm/2400mm, peso: aprox. 3000kg. Documentação disponível. É possível uma inspeção no local.
Força de compressão: 1000kN/100t, curso do carneiro: 200mm, pressão máxima de funcionamento: 290bar, controle: DNC70, distância de segurança: 166mm, tempo de deslocamento: 104ms, distância de deslocamento: 7mm.
Força de compressão: 2000kN, largura de trabalho: 3100mm, passagem da coluna: 3240mm, curso máximo: 400mm, profundidade da garganta: 250mm, altura máxima de instalação: 965mm, eixos NC: 11, volume hidráulico: 550l, dimensões da máquina X/Y: aprox. 4400mm/3400mm, peso: aprox. 16600kg, controle: Cyb-Tech Infinitron. Documentação disponível. É possível uma inspeção no local.
pressão: 10 tdistância entre colunas: 260 mmdayligth: 210 mmárea da superfície da tabela: 275 x 260 mm
Machining center and extruded profile plant for car sill production, consisting of:, Processing machines:, - Anger machine SP2-X2000 (machine number AA100264-11), - Anger machine SP2-X2000 (machine number AA100264-12), - 2x coolant treatment, Assembly of components (robot cell for sills):, - Robot 1 KUKA KR120 R3200 PA, - Gripper for robot 1, - Labeling station, - Robot 2 KUKA KR120 R3500, - Gripper for robot 2, - Robot/machining center interface, - Cleaning unit for components, - Assembly machine 2 lanes, - Robots 3 and 4 for handling, - Drawer system with parts inserts, - Screwing station, - Adhesive application station, - Platform, - Robot 5, - Gripper for robot 5, - Pallet parking space, - Safety enclosure, - Electrical control and integration, Further information on request.
pressure: 40 tthroat: 225 mmstroke: mmtotal power requirement: 4,7 kWweight of the machine ca.: 3,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tthroat: 250 mmstroke: 1280 mmtotal power requirement: 6,5 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tchamfer lenght: 2050 mmtotal power requirement: 11 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: m- ram adjustment: 150 mm- distance ram to table: 400 mm- stroke: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1250 tchamfer lenght: 15000 mmdistance between columns: 10160 mmControl: CNC 10 Grafik total power requirement: kWweight of the machine ca.: 230 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
