prensas usadas para venda (1,594)

pressão: 125 tdistância entre colunas: 1050 mmcurso: 250 mmnecessidade de potência total: 40 kWpeso da máquina ca.: 8,5 tdimensões da máquina ca.: m

pressure: 34,0 kNstroke: 40 mmthroat: 130 mmWorking height from to: 80 - 240 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 80 Kgdimensions: 375 x 200 mmToggle pneumatic pressesincl. working height fine adjustment via bevel gear with lateral crankcomfortable and easily adjustable.Toggle lever pneumatic presses are to be used when the maximumpressure is required shortly before the end of the stroke, e.g. when assembling, punching,embossing, caulking, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tthroat: 360 mmstroke: 560 mmtotal power requirement: 33 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: 2000x2400x3650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 10 tcurso: 200 mmtamanho da mesa: 450 x 450 mmvelocidade de trabalho:: 10 mm / seg.altura máxima de trabalho: 940 mmaltura máxima da peça de ferramentas: 150 mmnecessidade de potência total: 1,1 kW: 150 x 6 mmpeso: 0,4 tdimensões: 1,15 x 0,5 x 0,9 mmMáquina de dobra horizontal com:- Controle NC- Interruptor de pé duplo- Conjunto de ferramentas padrão

pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 40 tNº de cursos: 500 Hub/minlargura da folha: mmNecessidade de potência total: 5,5 kWpeso da máquina ca.: tdimensões da máquina ca.: m

pressão: 40 tcomprimento da mesa: 670 mmlargura da mesa: 570 mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: m

pressure: 20 tstroke: 180 mmdaylight between the columns: 540 x 100 mmdayligth: max. 990 mm: 72 mmdiameter of piston: 48 mmweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,8 x 0,7 x 1,8 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tstroke: 180 mmdaylight between the columns: 335 x 115 mmdayligth: max. 340 mm: 56 mmdiameter of piston: 40 mmweight of the machine ca.: 0,05 tdimensions of the machine ca.: 0,75 x 0,53 x 1,6 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 250 mmstroke: 100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 1000 x 1700 x 2600 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tpassage width: NA mmstroke: 180 mmtable length: 690 mmtable width: 530 mmdistance between columns: 420 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mHydr. 4-Pillar Press for Embossing/CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3 tthroat: 0 mmstroke: 200 mmtotal power requirement: 15 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mFully Automatically Straightening Press, 3 Stations,parts turning, (bolts)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 tcolumn daylight: 2600 mmstroke: 800 mmtable surface area: 6000 x 3000 mm: max. 800 mmadjustment of press crosshead: 5200 mmslide adjustment -horizontal: 1800 mmCapacity: 162 l/minfeed down: 9 mm/secfeed up: 14 mm/sectotal power requirement: 45 kWweight of the machine ca.: 50 t- Hydraulics : Rexroth- Controls : Tailor- Cylinder chromed- Operation via remote control & joystick- Stroke length adjustable via sensors- Pressure adjustable via PLCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26,0 kNstroke: 60 mmthroat: 110 mmWorking height from to: 70 - 250 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 46 Kgdimensions: 310 x 140 x 475 mmKnee lever hand presses SPECIAL PRICE!HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear withcomfortable and easy to adjust with a side crank.Stand height 475 mmEven more pressure in production without additional effort.Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology.Particularly stable construction of the spindle head and columnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tthroat: 0 mmstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mD U N K E S (Germany)CNC Controlled Hydraulic Double Column PressModel HD 10Year 1993________________________________________________________Pressure 10 tons Ram stroke 400 mmMounting height 600 mmTable size 400 x 300 mmTable height above floor 820 mmRam area 400 x 300 mmRam bore 40 mmQuickspeed, downwards, max. 70 mm/sWorking speed, downwards, using max. pressure 40 mm/sWorking speed, min. 5 mm/sWorking speed adjustable from  ...

Oferta 24591 Especificações: - Força máxima de compressão 25 t - Curso máximo de carneiro 500 mm - Velocidade de elevação 0 - 40 mm/s - Retorno 0 - 200 m/min - Altura de instalação 800 mm - Projeção para o meio do carneiro 360 mm - Superfície de fixação do empurrador 440 x 360 mm - Pino de fixação do êmbolo 40 mm - Tamanho da mesa: 630 x 500 mm - Altura da mesa acima do piso 710 mm - Força de termoformagem 10 t - Maior profundidade de desenho 160 mm - Acionamento 400 V / 4 kW - Necessidade de espaço aprox. L 800 x A 2720 x P 1150 mm - Peso aprox. 2500 quilogramas

pressure: 200 ttable length: 2500 mmtable width: 1800 mmtable travel: 2700 mmdayligth: 2250 mmupper clamping surface:: 1800x2500 column base area: 1900 mmtotal power requirement: 22 KWweight of the machine ca.: 30 tdimensions of the machine ca.: . mNominal force: 1000 kNTop plate pivotsTable is movableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created w ...

Pressão: 110 tComprimento do chanfro: 3050 mmdistância entre colunas: 2550 mmControle: CYBELEC DNC 880 S peso da máquina ca.: 10.000 kgdimensões da máquina ca.: 3400x1650x2700 mm

pressão: 28 tdistância entre colunas: 510 mmdayligth: 380 mmcurso: 260 mmpeso da máquina ca.: ca. 750 kg

Oferta 25100 Especificações: - Capacidade de pressão 200 t - Largura de trabalho 3050 mm - Passagem entre os verticais 2550 mm - Largura da mesa 180 mm - Projeção 250 mm - Altura de instalação 400 mm - Velocidade de alimentação 80 mm/seg. - Velocidade de trabalho 6,7 mm/seg. - Velocidade de retração 67 mm/seg. - Curso do êmbolo 150 mm - Faixa de ajuste fixo para 120 mm - Acionamento 400 V 14,5 kW - Necessidade de espaço aprox. L 3800 x A 2980 x P 1700 mm - Peso aprox. 11500 quilogramas - com: - Calibre traseiro com 2 dedos de paragem - Ferramenta de pé de veado - Matriz universal 4 vezes - Painel de controle de duas mãos, interruptor de pé,

pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 52/80 Hub/minram - range of adjustment: 60 mmtable surface area: 850x550mm mmram surface: 420x220 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø 45 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2000x2000x2700mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 150 mmreturn speed: 65 mm/secajustment speed: 50 mm/secwork height max.: 1010 mmoil volume: 150 ltotal power requirement: 11 kWweight of the machine ca.: 9500 kgdimensions: 3100 x 1750 x 2850 mmFurnishing:- DELEM CNC control DA65- controlled axes: Y1 + Y2 + X + R- Electric crowning device WILA, controlled via CNC- Electric back stop, travel range 600 mm- hydr. Upper tool holder WILA- hydr. WILA lower tool holder- front laser protection device FIESSLER- 5x manually adjustable stop fingers, foldable- 2x front support arms sliding system”- side + back protection device- Hand and foot controls- Operation manual?The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 ttable length: 1250 mmtable width: 900 mmtable travel: 1200 mmdayligth: 700 mmupper clamping surface:: 1000x1200 total power requirement: KVAweight of the machine ca.: 12 tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 35 t comprimento do chanfro: 2000 mmpeso da máquina ca.: 3 tnecessidade de potência total: kWdistância entre colunas: mmdimensões da máquina ca.: mpressão 35tomax. comprimento de flexão 2000mmpara-choques atrásda capacidade de acionamento 4,5 kWpeso 3000kg

Pressão: 50 tComprimento do chanfro: 2100 mmGarganta: 420 mmcurso: 200 mmPeso da máquina ab.: 4.000 kg

pressure: 1 tStroke: 315 mmtable surface area: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura máxima da perfuração: 90 mm Curso de cernelha: 100 mm Golpe de perfuração: 20 mm Força de imprensa: 30 kN Altura máxima do perfil: 100 mm Peso: aprox. 280 kg

pressure: 150 tchamfer lenght: 4300 mmdistance between columns: 3700 mmram stroke speed: 100 mm/secworking feed: 8 mm/secreturn speed: 80 mm/secstroke: 175 mmtable height: 920 mmControl: DELEM DA 52 total power requirement: 11 kWweight of the machine ca.: 15000 kgdimensions of the machine ca.: 4800 x 1700 x 2850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geral Fabricante: Transmatic Tipo: TS-3M Ano de Marca: 2007 Tamanho da placa: 38 x 38 cm Pressão máxima: 600 g/cm2 Ajuste de temperatura: 50 – 305°C Condição Estado: Usado Funcional: Testado e totalmente funcional