prensas usadas para venda (1,590)

CONTROLS  electronic controls SIEMENS S7 300 PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES  total force (nominal): 250 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1100 mm  height above floor level: 1105 mm  opening in bed (left-right): 1700 mm  opening in bed (front-back): 305 mmSLIDE  table surface (left-right): 2080 mm  table surface (front-back): 1000 mm  stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke adjustment: yes   stroke min.: 20 mm  stroke max.: 180 mmTOOL ASSEMBLY DIMENSIONS  shut height (str ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 160 to  stroke: 60 mm  stroke rate (max.): 70 /minCOUNTER RAM  nominal force: 40 to  stroke: 14 mmV-RING  nominal force: 50 to  stroke: 10 mmTOOL DIMENSIONS  lower table (left-right): 480 mm  lower table (front-back): 520 mm  upper table (left-right): 480 mm  upper table (front-back): 520 mm  shut height max.: 314 mm  ram adjustment: 80 mm  distance between columns (H-frame): 500 mm  passline opening (free passage in side columns): 220 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 210 mm  sheet thickness max.: 6 mm  feeding step max.: 999.9 mm  sheet len ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 50 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 450 mmSLIDE  table surface (left-right): 430 mm  table surface (front-back): 200 mm  clamping surface diameter: 340 mm  spigot hole diameter: 40 mm  stroke: 90 mm  stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 0 mm  stroke max.: 90 mm  main drive power: 3 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 300 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 700 mm  space requirements -front/back-: 1295 mm  total height: 2300 mm  total weight approx.: 3000 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 80 toPRESS TABLE  table surface (left-right): 860 mm  table surface (front-back): 620 mm  thickness of bolster plate: 70 mm  opening in bed (diameter): 165 mmSLIDE  table surface (left-right): 570 mm  table surface (front-back): 390 mm  spigot hole diameter: 50 mm  stroke: 120 mmSLIDE (MECHAN. PRESS)  slide adjustment: 90 mm  stroke min.: 9 mm  stroke max.: 120 mm  main drive power: 5.5 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 360 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1420 mm  space requirements -front/back-: 1700 mm  total height: 2990 mm  total weight approx.: 5600  ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 45 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 440 mm  opening in bed (diameter): 40 mmSLIDE  table surface (left-right): 410 mm  table surface (front-back): 280 mm  stroke rate (max.): 110 /minSLIDE (MECHAN. PRESS)  slide adjustment: 65 mm  stroke min.: 0 mm  stroke max.: 90 mm  main drive power: 5.5 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 380 mm  distance between columns (H-frame): 360 mmATTACHMENTS (PRESSES)  2-hand engagement: yes   foot engagement: yes   European CE standards: yes

CONTROLS  conventional PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 100 toSLIDE  slide force: 100 to  stroke rate (max.): 72 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 112 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 407 mmATTACHMENTS (PRESSES)  2-hand engagement: yes for safe tools only

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 2000 mm  height above floor level: 540 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 460 mm/s  working velocity min.: 25 mm/s  working velocity max.: 44 mm/s  return velocity max.: 460 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mmELECTRICAL SPECIFICATIONS  total power consumption: 180 kWDIMENSIONS / WEIGHTS  total weight approx.: 95000 kgATTACHMENTS (PRESSES)  press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes  & ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 75 toPRESS TABLE  table surface (left-right): 1250 mm  table surface (front-back): 1110 mmSLIDE  table surface (left-right): 960 mm  table surface (front-back): 750 mmSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke adjustment: yes   stroke min.: 10 mm  stroke max.: 50 mm  stroke rate (min.): 120 /min  stroke rate (max.): 600 /minSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mmELECTRICAL SPECIFICATIONS  total power consumption: 15.5 kWDIMENSIONS / WEIGHTS  total weight approx.: 13500 kgATTACHMENTS (PRESSES)  strip feeder: yes   feeder type: roll feeder

PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 950 mm  table surface (front-back): 660 mm  thickness of bolster plate: 68 mmSLIDE  table surface (left-right): 540 mm  table surface (front-back): 450 mm  spigot hole diameter: 60 mm  stroke: 130 mm  stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS)  slide adjustment: 100 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS  total weight approx.: 7000 kgLocated in Barcelona - Spain

pressão: 63 tdistância entre colunas: 360 mmcurso: 400 mmpeso da máquina ca.: 4 tdimensões da máquina ca.: 1.8x1.6x2.7 m

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: link drive   feedstock transport direction: left to right SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 22 to  stroke: 8 mmV-RING  nominal force: 25 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 220 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mm  feed velocity max. ...

Key data: 100 t, 3000 mm

Hidr. Freio de pressão CNC AMADA 3m, 100 tonelada sem ferramentas!

CONTROLS  PC controller BECKHOFF C 6140 PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 410 to  stroke: 200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 8 mm/s  working velocity max.: 80 mm/s  return velocity max.: 150 mm/sCOUNTER RAM  nominal force: 120 to  stroke: 40 mmV-RING  nominal force: 250 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 820 mm  lower table (front-back): 1250 mm  upper table (left-right): 820 mm  upper table (front-back): 1250 mm  shut height max.: 410 mmSTRIP-FEEDER  feeder t ...

pressão: X ttamanho da mesa: 550x390 mmgarganta: 550 mmtamanho da placa magnética: 250x100 mmpeso da máquina ca.: 0,25 tMais detalhes em

CONTROLS  PLC BECKHOFF PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 67 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 125 toV-RING  nominal force: 125 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 560 mmSTRIP-FEEDER  feeder type: roll feeder DIMENSIONS / WEIGHTS  total weight approx.: 14000 kgATTACHMENTS -FINEBLANKING PRESS-  decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 15 mmV-RING  nominal force: 75 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mm  distance between columns (H-frame): 560 mm  passline opening (free passage in side columns): 270 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step max.: 999.99 mm  sheet  ...

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 2000 mm  height above floor level: 700 mmSLIDE  table surface (left-right): 2000 mm  table surface (front-back): 2000 mm  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 400 mm/s  working velocity min.: 5 mm/s  working velocity max.: 160 mm/s  return velocity max.: 300 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mm  distance between columns (H-frame): 2100 mmELECTRICAL SPECIFICATIONS  total power consumption: 370 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS /  ...

CONTROLS  PLC SIEMENS S7-400 PRESS DESIGN  drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES  total force (nominal): 1000 toPRESS TABLE  table surface (left-right): 2066 mm  table surface (front-back): 2000 mm  height above floor level: 630 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 600 mm/s  working velocity min.: 15 mm/s  working velocity max.: 40 mm/s  return velocity max.: 390 mm/s  return force: 100 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1710 mm  distance table - slide max.: 1700 mmELECTRICAL SPECIFIC ...

PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE  total force (nominal): 160 to  stroke: 60 mm  stroke rate (max.): 72 /minCOUNTER RAM  nominal force: 40 to  stroke: 60 mmV-RING  nominal force: 50 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 470 mm  lower table (front-back): 470 mm  upper table (left-right): 500 mm  upper table (front-back): 470 mm  shut height max.: 277 mm  ram adjustment: 80 mm  distance between columns (H-frame): 500 mm  passline opening (free passage in side columns): 220 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 210 mm  sheet thickness max.: 6 mm  feeding step max.: 180 mmELECTRICAL SPECIFICAT ...

CONTROLS  PLC SIEMENS S5 SLIDE  total force (nominal): 160 to  stroke: 60 mmCOUNTER RAM  nominal force: 80 toV-RING  nominal force: 80 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 600 mm  shut height max.: 335 mm  ram adjustment: 125 mm  distance between columns (H-frame): 630 mm  passline opening (free passage in side columns): 270 mmCROP SHEAR  cutting force: 150 kNDIMENSIONS / WEIGHTS  total weight approx.: 11000 kgATTACHMENTS -FINEBLANKING PRESS-  autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machine !2016 Overhaul by Fei ...

Pressão máxima em kg: 6000

Dados técnicosPressura: 4,5 kNSSa superfície:Comprimento: 170 mmWidth: 145 mmDepth da garganta: Máquina de 100 mmAqueto dimensões:Comprimento: 380 mmWidth: 300 mmHeight: 700 mm

Dados técnicos Fabricante: Otto Schröder Curso: 160mm ajustável à mão Distância entre o suporte: 800mm Passe: 250mm Tabela de suporte: 800mm, com 4 ranhuras parte círculo 400mm dimensão de ranhura 25x75mm Furo: Centro de mesa 70mm Altura da mesa: 835mm Dimensões: LxWxH 110x900x2200mm

A máquina encontra-se em boas condições técnicas; após acordo prévio, é possível testá-la. - Força nominal de formação: 120 t Comprimento de trabalho: 3106 mm Delem de controlo CNC (programação gráfica 2D) Cálculo automático da sequência de flexão e deteção de colisão Eixo traseiro X com 2× dedos de paragem manualmente ajustáveis Ajuste de altura eletromotor CNC do medidor traseiro (eixo R) Deflexão da mesa controlada eletricamente CNC Adaptador de ferramenta superior ROLLERI Equipamento e acessórios: - Dispositivo de proteção frontal (porta basculante) - Dispositivo de proteção traseiro (porta deslizante) - 1× livremente móvel com duas mãos / Controlo de pé - Instruções de funcionamento incluindo declaração CE

força nominal - 4000 kN Tabela - 1250x825 mm

Key data: 63 t, 500 mm

Tabela - 750x560 mm Ejetor inferior

A máquina encontra-se em bom estado técnico, os testes são possíveis após acordo prévio. Temos um vídeo da máquina disponível.

This HIDROLIKSAN PH4C 200T hydraulic press was manufactured in 2015. It features a robust press force of 200 tons and a large table measuring 1800x1400 mm, ideal for various pressing applications. Consider the opportunity to buy this HIDROLIKSAN PH4C 200T hydraulic press. Contact us for more information.

This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours.

N.º : 948 Tipo: LVH 2500 Produtor: ŽĎAS Criado: 1961 Parâmetros: Profundidade: 1800 mm Largura: 3450 mm Altura acima do solo: 4650 mm peso: 85 000 kg Tensão: 220 / 380 V Frequência da rede: 50 Hz Mão de obra: 2500 t Número de cursos: 20/min Altura dos elevadores: 500 mm Distância mínima do êmbolo em relação à mesa: 900 mm Distância máxima do êmbolo em relação à mesa: 1400 mm Superfície da mesa: 1050 x 1400 mm Área do êmbolo: 1050 x 1200mm