Fabricante:
(Categoria: 101)
Centro de usinagem de 5 eixos Mori Seiki NHX 5000 Ano de construção 2011 (comprado novo em 2013) Horas10768 Tempo de processamento 7172 horas Eletricidade uma hora 29288 Com poucas horas de funcionamento, usado apenas para uma única peça para produção em pequena série, principalmente para engenharia mecânica especial As especificações são as seguintes: Curso: Cilindro 500 x 700 Controle M730BM (Mapps2) Velocidade 10.0000 rpm. Suporte para ferramentas SK40 DIN 69871 Trocador de ferramentas 60 vezes Trocador de paletes 2 vezes Acessórios: Documentação Refrigeração interna Knoll 50 bar Transportador Ativação para 400 posições de ferramentas Palete de pinho com sistema de fixação de ponto zero longo Torre de tensionamento Lang aprox. 100 peças de porta-ferramentas SK40 Uma inspeção no local é possível a qualquer momento, mediant ...
Key data: 32 mm
Curso da lança aprox. 600 mm Tabela de distância - nariz do fuso mínimo 250, máx. 650 mm Curso Quill 190 mm Faixa de velocidade: 18 velocidades 41-1.850 rpm Alimentações de perfuração: 4 peças (de 0,1 - 0,3 mm/rev) Mesa de trabalho 600mm x 1200mm Porta-ferramentas MK 4
GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...
GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle diametre on front bearing120 mmSpindle noseA2-6 Spindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke190 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmWork spindle (left)Spindle noseFlat flange Spindle bore73 mmDiametre of spindle nose140h5 mmSpindle diametre on front bearing100 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed m ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Speed max.6000 rpmNumber of driven tools12 Power max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (40% DC)14 kWDrive power (100% DC)12,6 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmGeneral2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed m ...
GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmClamping chuck diameter max.315 mmLongitudinal stroke1345 mmTransverse stroke260 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightWeight approx.7800 KgDimensions (L x W x H)5,4 x 2,07 x 2,6 mPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs, potential-freeExcentric turning and milling operationExcentric turning and milling operation (only with Sie ...
General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist fi ...
Controle Heidenhain TNC 620 V2 Curso X/Y/Z 760/480/480 milímetros Velocidade 12000 rpm. Revista de ferramentas para 24 ferramentas SK40 Tamanho da mesa: 900x410 mm Transportador
Key data: 1000 mm, 1000 mm, 1000 mm
Centro de usinagem horizontal de 4 eixos Curso eixo x 1000 mm eixo y 1000 mm eixo z 1000 mm Eixo B 360.000 x 0,001 Tamanho da palete 630 x 630 mm Trocador de paletes 2 vezes Dimensões da peça D x diâmetro H. 1000 x 1200 milímetros Peso máximo da peça. 1400 quilogramas ---------------------------------------------------------------------- ---------------------------------------------------- Travessias rápidas 50 m/min Faixa de velocidade de até 8.000 rpm Potência de transmissão do eixo 43 kW/ 822 Nm ---------------------------------------------------------------------- ---------------------------------------------------- Revista de ferramentas - cadeia de 150 posições de ferramentas Porta-ferramentas HSK 100 Comprimento ...
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diâmetro do eixo: 130 mmx-curso: 3500 mmy-curso: 2500 mmeixo z: 1250 mmEixo W (eixo longitudinal): 800 mm: ISO 50 P.D.B: 1800x2500 mm: 12 t: 3000 Hertz: 400 Potência total necessária: 37 kWpeso da máquina ca.: tdimensões da máquina ca.: mATC 40 posiçõesProteção desegurança Refrigerante
Key data: 350 mm, 250 mm, 200 mm
• Fresadora Brother – Centro de usinagem TC 31 (2 peças, fig. 1) Ano de Marca: 2007 Curso X: 350 mm Curso Y: 250 mm Curso Z: 200 mm Velocidade do eixo: até 22.000 rpm Cone do eixo: BT30 Mesa de trabalho: 500 x 270 mm Wz – Revista: 26 lugares Característica especial: Mesa projetada como um trocador rotativo, suporte de fixação de carga via carregador e robô ABB
Suporte de eixo MK 3 Capacidade de perfuração em aço: 30,0 mm Bomba de refrigerante
x-travel: 730 mmy-travel: 730 mmz-travel: 880 mmtotal power requirement: 46 kWweight of the machine ca.: 15 trequired space: 5.5x3.0x2.8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 600 mm, 460 mm, 460 mm
Controlo: OSP-E100M Viagens: Eixo X: 600 mm Eixo Y: 460 mm Eixo Z: 460 mm Peso máximo da peça: 500 kg Superfície de fixação: 1.000 x 460 mm Montagem: SK 40 DIN ISO 69871 Carregador de ferramentas: 32 – compartimento Velocidade do eixo: máx. 15.000 rpm Acessórios - IKZ / Arrefecimento interior -Transportador - Unidade USB
Controlador de eixo FRSGJ-2-5,5-B-N, AC Motor de eixo SJ-VL 5,5-05, servo drive MR-S1-80-E01, Servo Drive FRSFJ/SGJ-2-5,5K./,5K MC 713/727 , MC161-1 , MC303 , MC301 , MEM_AMC433
curso x: 4.000 mmy-curso: 2.100 mmz-curso: cone de 1.000 mmISO: ISO 50 Número de rotações: 5.000 rpmtamanho da mesa: 4.020x2.010 mmpeso da mesa: 12.000 kgcontrole: Heidenhein iTNC530 Lugar das ferramentas: 32 fachtaverse rápido: 15.000 mm/minnecessidade de potência total: kWpeso da máquina ca.: 39 tdimensões da máquina ca.: 10680x5600x5100 m
Especificações: Diâmetro da broca: 1,5 - 3 Suporte para mandril de perfuração: B16 Curso do eixo: 50 mm Projeção: 150 mm Diâmetro da coluna: 46 mm Potência do motor: 350 W Conexão: 230 V Dimensões (LxPxA), aprox.: 220 x 450 x 590 mm Peso, aprox.: 55 kg Equipamento: - Pé maquinado com ranhuras em T - Mandril de roda dentada
Capacidade de perfuração aço/GG: aprox. 25 mm Suporte do eixo: 2 MK Projeção: 300 mm Tamanho da mesa: 305 x 380 mm Curso da quila: 115 mm Velocidades do eixo: 200 - 1200 rpm Motor de acionamento: 380 V, 1/1.5 kW Requisito de espaço: 800 x 400 x 1800 mm Peso: aprox. 280 kg
bore capacity in steel (diameter): 40 mmthroat: mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 35 mmthroat: 1000 mmworkpiece height max.: 200 - 1400 mmheight adjustment: 745 mmbase plate surface area: 1200 x 930 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mmturning speed range: 60 - 1850 U/minfeed range: 0,09 - 1 mm/Upower capacity: 3,7 kWweight of the machine ca.: 3,7 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 mCube table 800 x 800 x 650 mmCoolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 640 mmy-travel: 600 mmz-travel: 500 mmcontrol: Siemens 840 D total power requirement: 19 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 5 x 4 x 3 mNo. 5312:Vertical machining center DECKEL MAHO type DMC 64 V linearyear of construction 2007Siemens 810 D ShopmillWorking area: 640 x 600 x 500 mmDrive power: 13/19 kWEquipment:Table 850 x 600 mm ( WITHOUT the clamping devices shown )Preparation 4th axisProduction package / IKZ 40 bar:BFA 600 cooling lubricant cleaning systemIntegrated spiral chip conveyorSeparate scraper belt chip conveyordocumentationMiscellaneous:Spindle ISO 40Speed range 1-12,000 min-1Space requirement see sketchTransport dimensions approx. 6.5 loading metersWeight approx. 8.8 tonsThe machine is ready for operation with wear and tear due to age and use.Short video: https://www.youtube.com/watch?v=sDkgx4BYXeYSpecial price ex works EXW - free loaded ...
W&T EFRA
