Fabricante:
(Categoria: 108)
table diameter: 1500 mmtable load: 5,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 10000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,5 + 3,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 700 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/min: 900 Nmtotal power requirement: 0,37 / 0,37 kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: 800 x 800 mmtable load: 1500 Kgswivelling range: 0 - 105 Gradturning speeds: 0,15 - 1 U/minheight adjustment: 672 - 1180 mmhollow spindle diameter: mmwelding current: 500 Amperemax. torque on the faceplate: 3000 Nmtotal power requirement: 0,75 kWdimensions of the machine ca.: 1560x1120x750 mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The dat ...
table length: 2900 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,9 tdimensions: 2,9 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1600 mmtable load: 6 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 12000 Nm0: 1,5 / 2,2 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1400 mmtable load: 2,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1500 mmtable load: 5000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1300 - 2050 mmmax. torque on the faceplate: 10000 Nmengine output: 1,5 / 1,5 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
corrente de soldadura: 30 - 200 AFrequência de carga ligada: 230 Vpeso: 3,6 kgDimensões (CxLxA): 290 x 135 x 2600 mmÂmbito de entrega: Máquina de soldadura TIG Buddy TIG 160Elétrodo e cabo de terra 3mTocha TIG ET 17 4mMangueira de gás com porca união
corrente de soldadura: 15 - 40 Acapacidade de corte: 1 - 16 mmtensão de circuito aberto: 96 VPressão de ar necessária: carga conectada mínima de 4 bar: 3,6 kWfrequência de carga conectada: 230 Vpeso: 9,0 kgDimensões (CxLxA): 371 x 153 x 232 mmMáquina de exposição Cortador a plasma inversor com acessórios: Tocha de corte com cabo de 4 m, grampo de ligação à terra com cabo de 2,5 m, manómetro de pressãode ar, máscara e escova.
número: 24 Peso do posicionamento: 22 kgcondição: neu 0Conjunto básico 1 / 24 peçaspara espessura de mesa 15 e 25mm4 grampos, altura de fixação 300mm, projeçãovariável 8 parafusosde fixação 2 peças parar 100mm4 pcs. parar 150mm2 peças parar 225mm1 peça suporte detocha 1 peça escova perfurada 30mm1 peça Loção de separação 500ml1 pc. Limpador de mesa de soldadura em base natural e biológica 500ml
peso máx.: 1000 kgdiâmetro da peça: 20 - 800 mmdiâmetro do tambor: 200 x 50 mmalimentação: 80 - 1600 mm/minpotência total necessária: 0,23 kWdimensões da máquina ca.: 2 Stk. 0,45x,039x0,33 m
clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1200 mmtable load: 1,2 tswivelling range: 0 - 120 Gradturning speeds: 0,06-0,6 U/minmax. torque on the faceplate: 2400 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,75 + 1,1 kWweight of the machine ca.: 1,0 tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping range of chuck: 200 - 500 mmheight: 110 mmdaylight: 240 mmexternal diameter: Futter 320 mmexternal diameter: Spannhebel 700 mmweight: 56 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mmweight of the machine ca.: 0,45 tWelding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmHeight adjustable from approx. 920 - 1000mmRibbed bottom for reinforcement.including floor storageAccessories optionalAccessories shown are optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1400 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,5 tdimensions: 1,4 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 4000 mmtable width: 2000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 2,5 tdimensions: 4,0 x 2,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Um dispositivo de soldagem ultra-sônica Branson está disponível. Freqüência: 20kHz, potência: 900W, curso: 100mm, força de fixação a 690kPa: 1.96kN, liberação dinâmica: 67N-734N. Documentação disponível. É possível uma inspeção no local.
Uma célula de soldagem Akon incluindo robô Kuka e 2x fontes de soldagem Dinse está disponível. 1) Robô de soldadura: Kuka KR 6 R900, carga útil: 6kg, alcance: 900mm, controle: KR C4 compacto, carga da flange: 25kg, peso total: aprox. 170kg. 2) Célula de soldagem automática Akon Robotics com plataforma giratória e sistema de controle Kuka. 3) Fonte de energia de soldagem Dinse Dix PI 900. O motor EP para o 4º eixo foi substituído em 2023. Documentação disponível. É possível uma inspeção no local.
Está disponível uma máquina de corte a laser CNC CO2 Amada com sistema de armazenamento automatizado LKI. 1) Poder do laser: 4kW (4000W), curso X/Y/Z: 3100mm/1550mm/100mm, carga máxima da tabela: 920kg, espessura máxima do material aço/aço inoxidável/alumínio: 20mm/12mm/10mm, dimensões do sistema laser X/Y/Z: aprox. 10000mm/4300mm/2100mm, peso: aprox. 11000kg. 2) Paletes: 8, paletes de corte: 2, matéria-prima: 2/3, descarga: 4/3, altura máxima de descarga: 2200mm, dimensões máximas do material X/Y: 3050mm/1525mm, dimensões mínimas da folha: 2000mm/1000mm, altura: 5400mm. Documentação disponível. É possível uma inspeção no local.
Viagem X/Y/Z: 2520mm/1550mm/300mm, dimensões máximas da folha X/Y: 5040mm/1550mm, espessura máxima do material aço macio/aço inoxidável/alumínio: 12mm/6mm/3mm, peso máximo da peça: 330kg, velocidade de posicionamento: 80m/min/80m/min/60mm/min, precisão de posicionamento: +/-0.01mm. Dimensões da máquina X/Y/Z: aprox. 5650mm/3650mm/2100mm, peso: aprox. 6600kg, horas de funcionamento: 29499h. Incluindo o laser Fanuc modelo C1500. Documentação disponível. É possível uma inspeção no local.
Carga: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, diâmetro máximo de giro em 90: 1600mm, velocidade: 1.2rpm, tempo de inclinação para 135: 30s, caixa de velocidades: Boehringer Sturm, tipo de caixa de velocidades: caixa de velocidades 2DA 11 oil. É possível uma inspeção no local.
Tipo de laser: CO2, potência do laser: 2.2kW, faixa de trabalho X/Y/Z: 1500mm/3000mm/100mm, espessura máxima do material: alumínio: 8mm, aço macio: 10mm, aço inoxidável: 6mm, peso máximo da peça: 890kg. Velocidade de posicionamento X/Y: 100m/min, velocidade de posicionamento simultâneo: 140m/min, consumo total de energia: 37kW, peso máximo da folha: 70kg/m². Dimensões X/Y/Z: 6000mm/6400mm/2150mm, peso: aprox. 13500kg.
Capacidade de carga: 25t, distância do centro de gravidade: 700mm, excentricidade: 250mm, velocidade: 0.66rpm, faixa de inclinação: 0-130, tempo de inclinação: 120s, altura da mesa (plana): 1930mm, altura do eixo de rotação: 1600mm, diâmetro da mesa: 2500mm, potência do motor tilt/rotate: 7.5kW/4.5kW, comprimento total: 3000mm, largura total: 2500mm. Documentação disponível. É possível uma inspeção no local.
Potência do laser: 10kW (10000W), faixa de trabalho: 3000mm/1500mm, espessura máxima do material: aço macio: 25mm, aço inoxidável: 30mm, alumínio: 30mm, cobre: 12mm, latão: 15mm. Velocidade de posicionamento: 120m/min, precisão de posicionamento: +/-0.05mm, peso máximo da peça: 1100kg. Dimensões da máquina X/Y/Z: aprox. 9500mm/3500mm/3500mm, dimensões de sucção X/Y/Z: aprox. 1500mm/1500mm/4000mm, peso da máquina: aprox. 12000kg, horas de funcionamento: aprox. 17000h. Documentação disponível. É possível uma inspeção no local. Previsão de estar disponível a partir de junho de 2025.
Máquina de soldadura de costura de canto Fröhlich SAX 700, processo de soldadura: MIG/MAG/WIG, comprimento máximo da soldadura: 700mm, ângulo máximo de soldadura: 180, velocidade de soldadura: 2500mm/min, espessuras do material: 0.8mm-6mm, materiais: aço/aço inoxidável, dimensões da máquina X/Y/Z: aprox. 800mm/1000mm/1800mm. Máquina de solda Migatronic Automig 273i, fusível: 10A, consumo máximo de energia: 9.1kVA, potência sem carga: 20W, eficiência: 88%, fator de potência: 0,93, faixa atual: 10A-270A, dimensões da máquina X/Y/Z: aprox. 550mm/250mm/650mm, peso: aprox. 30kg. Documentação disponível. É possível uma inspeção no local.
Está disponível um sistema de extração de fumos de soldadura PlymoVent. Volume do tanque de ar comprimido: 11l, qualidade do ar comprimido: classe 6, pressão de operação: 4bar-5bar, consumo de ar comprimido por pulso: 40nl-50nl. Documentação disponível. É possível uma inspeção no local.
