bore capacity in steel (diameter): 28 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 3 MK table:: 500 x 350 mm column diameter: 105 mm turning speeds: 75 - 3010 U/min total power requirement: 0,9 / 1,2 kW weight of the machine ca.: 235 kg. range L-W-H: 1740 x 670 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
novo
Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
peso máx.: 1000 kg diâmetro da peça: 20 - 800 mm diâmetro do tambor: 200 x 50 mm alimentação: 80 - 1600 mm/min potência total necessária: 0,23 kW dimensões da máquina ca.: 2 Stk. 0,45x,039x0,33 m
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 1000 kg : 190 mm connected load frequency: 380 V total power requirement: 0,75 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressão de alimentação: 13 bar Entrega efetiva de ar livre: 690 L/min Capacidade do recetor: 270l / 16bar l / bar peso da máquina ca.: 199 kg. motor: 400V / 5,5KW V / KW gama L-W-H: 1,7 x 0,6 x 1,27 mm É uma versão de alta pressão (especialmente para serviço de caminhão ou para trabalho pesado). OPÇÃO: O UWM 7.5/690/270 pode ser equipado com uma unidade de partida (circuito estrela-delta ). Sobretaxa: EUR 379
table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 2000 kg : 190 mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. weight of the machine ca.: 0,28 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 227 mm saw band length: 2455 mm table height: 840 mm cutting width: 260 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm capacity 90 degrees: round: 227 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 260 x 220 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 145 mm capacity 45 degrees: flat: 200 x 220 mm total power requirement: 1,5 kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 0,8 x 1,4 x 1,5 m Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 400 mm table width: 400 mm table load: 0,2 t table diameter: 400 mm swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 100 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,065 t dimensions of the machine ca.: 0,56 x 0,42 x 0,46 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 550 mm table load: 500 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlos table load capacity: 250 kg. vertikal total power requirement: 0,8 kW weight of the machine ca.: 245 Kg dimensions of the machine ca.: 820 x 730 x 710 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
peso máx.: 2,2 t diâmetro da peça: 101 - 1524 mm velocidades de alimentação infinitamente variáveis: 0 - 3600 mm/min diâmetro da engrenagem: 254 mm largura da engrenagem: 76 mm necessidade de potência total: 0,5 kW peso da máquina ca.: 0,245 t dimensões da máquina ca.: 1,02 x 0,82 x 0,5 m
bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table load: 500 Kg table load capacity: 250 kg. vertikal table diameter: 550 mm swivelling range: 135 (-45 - +90) Grad turning speeds: 0 - 5 stufenlos U/min connected load frequency: 230 V total power requirement: 0,8 KW weight of the machine ca.: 0,255 t dimensions of the machine ca.: 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 300 mm table load: 50 Kg swivelling range: 90 Grad turning speeds: 1 - 12 stufenlos U/min table load capacity: 50 kg vertikal total power requirement: 0,22 kW weight of the machine ca.: 0,036 t dimensions of the machine ca.: 0,45 x 0,43 x 0,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 450 mm table load: 300 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 300 kg vertikal total power requirement: 220 kW weight of the machine ca.: 0,078 t dimensions of the machine ca.: 0,66 x 0,45 x 0,48 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 350 mm table load: 100 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 50 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,055 t dimensions of the machine ca.: 0,46 x 0,4 x 0,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2200 mm table width: 1500 mm stroke height: 1850 mm weight max. in kg: 2000 kg : 260 mm total power requirement: 1,5 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,45 t dimensions of the machine ca.: 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diâmetro do tubo: 1/4 max. 2 Zoll resistência da parede: máx. 3,0 mm motor: 400Volt / 1,5KW peso: 90 kg dimensões: 07 x 0,4 x 0,3 m Entalhe de tubo Espessura máxima da parede 3,0 mm Adequado para os seguintes tubos: 1/4, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
peso máx.: 5,0 t diâmetro da peça: 303 x 2438 mm velocidades de alimentação infinitamente variáveis: 0 - 1745 mm/min diâmetro da engrenagem: 305 mm largura da engrenagem: 100 mm necessidade de potência total: 0,5 kW peso da máquina ca.: 0,37 t dimensões da máquina ca.: 1,5 x 1,05 x 0,7 m
table load: 110 Kg table load capacity: 55 kg. vertikal table diameter: 250 mm hollow spindle diameter: 65 mm chucking diameter: 200 mm swivelling range: 0 / 30 / 60 / 90 Grad turning speeds: 0 - 8 stufenlos U/min total power requirement: 0,15 KW weight of the machine ca.: 25 Kg dimensions of the machine ca.: 0,5 x 0,53 x 0,6 m Welding turntable with - large passage 60mm - Footswitch - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission - Bore in faceplate 60mm. Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 330 mm bore stroke: 190 mm spindle taper MT: 4 MK table:: 500 x 400 mm column diameter: 140 mm turning speeds: 90 - 1500 U/min total power requirement: 2,2 kW weight of the machine ca.: 435 kg. range L-W-H: 570 x 930 x 2170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 185 mm bore stroke: 50 mm : 20 mm spindle taper: MK 2 spindle diameter: mm spindle turning speed range: 100-1500 / 200-3000 U/min : 175 mm : 280 mm table surface area: 500 x 180 mm connected load frequency: 230 V total power requirement: 0,85 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diâmetro do tubo: 50,8 mm de resistência à parede: 1,0 mm de aço quadrado: 50 x 50 x 1 mm de aço redondo da barra: 25 x 6 mm de peso da máquina ca.: 46 Kg dimensões: 0,6 x 0,4 x 0,5 m
capacidade de furo em aço (diâmetro): 20 mm de garganta: curso de furo de 195 mm : eixo chato de 80 mm : MK 2 superfície de mesa: 320 x 300 mm total de potência: 0,75 kW peso da máquina ca.: 0,072 t dimensões da máquina ca.: 0,7 x 0,4 x 1,1 m
table diameter: 330 mm table load: 350 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 120 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 52 Kg dimensions of the machine ca.: 640 x 490 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 330 mm table load: 220 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 100 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 48 Kg dimensions of the machine ca.: 640 x 440 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
