Producent:
(Kategoria: 104)
internal diameter:140 mmtotal power requirement:5,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:2,8 x 2,5 mmax. workpiece weight:15 kgclamping dia. max.:140 mmclamping length:250 mmmax. bore diameter to be ground:0,8-90 mmmin./max. hole to grind:160 mmcentre height:90 mmworkpiece spindle stepless:112-1000 U/min
width of the strips: 75 mmband length: 2000 mmband speed: 33 m/sweight of the machine ca.: 90 kgPower: 3 KW 400V / 50HzVolume: 83 dBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mmtable length: 0 mmtable width: mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: mCut-Off Machine for Hard Materials, Coolant, Hand Lever11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. bore diameter to be ground: 6 bis 100 mmstroke - stepless adjustable: 550 mmgrinding depth: ca. 250 mmworkpiece weight: 150 kgtotal power requirement: 15 kWweight of the machine ca.: 4.300 kgdimensions of the machine ca.: 2,7 x2,4 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 750 mmgrinding width: 500 mmworkpiece height: 500 mmtotal power requirement: 50 kWweight of the machine ca.: 5000 tGrinding length, max. 750 mmGrinding width, max. 500 mmCross movement of grinding slide 450 mmWorking height under grinding wheel, max. 500 mmGrinding wheel size Æ 400 x 100 mmGrinding wheel speeds, infinitely variable 300-3,000 rpm Table speed, hydr. 0 - 30 m/minTable speed, creep feed 0.02 - 1,000 mm/minVertical infeed, infinitely variable 0.002 - 0.03 mm/strokeGrinding spindle drive, max. 32 kWTotal electrical load, approx. 50 kW - 380 V - 50 Hz Weight approx. 5,000 kgAccessories / Special Features Creep feed: Electro-mechanical feed (but also ...
working area: 225 mmtable-size: L:550 mmtable-size: B:200 mmsanding disc diameter: 200mm mmmagnetic plate size: 500 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2000x1600x2100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter:5-55 mmgrinding length:500 mmtotal power requirement:44 kW-- Intended use and general information --Fully automated external and surface grinding of synchronous ringsCentre height: 200 mmGrinding length: 500 mmGrinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mmDrive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µmWorkpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-DMachine weight: 7,000 kgCentre height: 200 mmGrinding length: 500 mm
max. grinding diameter:160 mmstations:2 sanding width:30 mmtotal power requirement:0,37 kWweight of the machine ca.:100 kgdimensions of the machine ca.:520 x 520 x 1160 mm
no. of working stations:1 Stücktool adaptor:1650 W revolutions per minute:2990 U/mintotal power requirement:380V, 2,7 Aweight of the machine ca.:33 kg
grinding length: 400 mmgrinding width: 250 mmworkpiece height: 300 mmtotal power requirement: ? kWweight of the machine ca.: 2 tdimensions of the machine ca.: 222 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 250 mmcentre distance: 0 mmhoning length max.: mmmax. module: 5 Gear Ø, min./max. 10 / 250 mmModule range 1 - 5Length of teeth / max. table stroke 500 mmHeight of centres of tailstocks 220 mmMax. weight of workpiece 50 / 100 kgHoning head swivelling +/- 35 °Speeds of honing tool 20 - 500 rpmSize of honing tool, Ø x width 300 x 40 mmWorkpiece speeds 500 - 3,000 rpmTotal adjustment of cross slide 270 mmRapid traverse of cross slide 50 mmInfeed travel of cross slide, mechanical 1 - 8 mm/ØRoughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/secTable speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 HzWeight 3,200 kgAccessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch, as well as b ...
no. of working stations:1 Stücktool adaptor:1650 W revolutions per minute:2990 U/mintotal power requirement:380V, 2,7 Aweight of the machine ca.:33 kg
working width:1400 mmWorkpiece thickness max.: 80 mmwork height max.:1000 mmFeed speed:4m/min I Stufe, 8 II Stuf m/min.Required air-pressure:max. 5 barvoltage:50 Hz, 380 Vworkpiece length:320 mmworkpiece thickness min.:1 mmweight of the machine ca.:3500 kgDocuments:vorhanden
workpiece length:350 mmwork piece width:150 mmdiameter:Tellerradius 200 mmtool taper:M32 x 1,5 spindle diameter:32 mmgrinding width:max.450 mmturning speeds:3385 U/minwork table::Höhe 1000 mmworkpiece height max.:100 mmtotal power requirement:1,1 kWweight of the machine ca.:300 kgdimensions of the machine ca.:700 x 800 x 1170 mm
table diameter:520 x 22 mmtable - swivable:45 Gradtotal power requirement:1,6 kWweight of the machine ca.:130 kgdimensions of the machine ca.:520 x 520 x 1200 mmmit SchleifzylinderZubehör: 4 ( Aluzylinder) Werkzeuge zur Aufnahme von SchleifmittelnØ 50, 70 , 90, 120 mm x 223 mmneuer Motor
sanding belt length:max. 470 mmworkpiece dia.:600 mmtable - swivable:0 - 6 Gradtaper:Reitstock Morse 2 turning speed range::1260 - 3100 U/mintable movement:längs 470 mmtool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kWweight of the machine ca.:950 kgdimensions of the machine ca.:1100 x 1100 x 1500 mmDocuments:vorhanden
max. grinding diameter:50 mmgrinding length:250 mmworkpiece length:300 mmtotal power requirement:0,7 kWweight of the machine ca.:330 kgdimensions of the machine ca.:1000 x 1000 x 1400 mm
grinding length:600 mmgrinding width:250 mmworkpiece height:380 mm:Sinumerik max. dia. of grinding wheel:300 mmweight:4000 kgtotal power requirement:12,5 kWgrinding wheels:Ø 400 mmmax. width of grinding wheel:100 mmgrinding wheel hole diameter:127 mmturning speeds:470 - 12030 1/minx-axis:600 mmy-axis:300 mmz-axis:250 mmgrinding range:450 x 200 mmdistance spindle nose and table:500 mmtable load:250 kgdimensions of the machine ca.:2600 x 2100 x 2400 mmswitchgear cabinet:1300 x 800 x 2000 mmhydraulical unit::450 x 350 x 500 mmDocuments:vorhanden
grinding length:1250 mmgrinding width:400 mmworkpiece height:550 mmworkpiece weight:750 kgtable-size:1720 x 400 mmmagnetic clamping plate:1250 x 400 mmdist. center of grinding spindle - table:750 mmturning speed range - grinding wheel:3000 U/minLength movement of the table:1300 mmgrinding wheel size:Ø 400 x 50 x 127 mmswitchgear cabinet:inkl. hydraulic power unit:inkl. coolant:inkl. voltage:380 Vtable load:max. 1100 total power requirement:13,8 kWweight of the machine ca.:6000 kgdimensions of the machine ca.:5000 x 3400 x 2400 mmDocuments:inkl.
max. wheel diameter: 0 mmgear width: 120 mmmax. module: 3 min. module: 1 total power requirement: 20 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: m: : : : : : 5 machines in stock,YOM: between 1986 and 1990Gear Æ, min./max. 55 / 120 mmGear Æ for shaft-formed parts 80 mmModule (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 °Helix angle, max. 40 °Workpiece clamping length 145 - 420 mmGrinding worm Æ 300 - 400 mmGrinding worm width 25 - 40 mmGrinding worm speeds, infinitely variable (35 m/s) 1,650 rpmFeed range ...
internal diameter:315 mmgrinding depth:315 mmswing diameter:420 mmnumber of spindle speeds:32 - 360 U-minwheel box:-drehzahl 100 - 8000 U/minface diameter:500 mmtotal power requirement:12 kWweight of the machine ca.:5900 kgdimensions of the machine ca.:3400 x 1750 x 2000 mm
total power requirement:10,5 kWweight of the machine ca.:4800 kgdimensions of the machine ca.:3000 x 2100 x 2000 mmcentre distance:1200 mmHeight of centres:200 mmgrinding-table stroke max.:X -Achse 1000 mmtable-size:2060 x350 mmz-axis:Querhub 250 mmFeed speed:0,005 - 5 m/min.grinding head - swivable:360 °taper ISO:50 control:Sinumerik System 8 Documents:vorhanden
Maksymalne ciśnienie 125 Psi, zasilanie 10 W, NIGDY NIE UŻYWANE. Wymiary całkowite: 900 x 600 x 1500 mm Waga: 50 kg Auction-ID: A7-48622-297
Maksymalne ciśnienie 125 Psi, zasilanie 10 W, NIGDY NIE UŻYWANE. Wymiary całkowite: 900 x 600 x 1500 mm Waga: 50 kg Auction-ID: A7-48621-67
Maksymalne ciśnienie 125 Psi, zasilanie 10 W, NIGDY NIE UŻYWANE. Wymiary całkowite: 900 x 600 x 1500 mm Waga: 50 kg Auction-ID: A7-48622-67
Maksymalne ciśnienie 125 Psi, zasilanie 10 W, NIGDY NIE UŻYWANE. Wymiary całkowite: 900 x 600 x 1500 mm Waga: 50 kg Auction-ID: A7-48621-297
10 € 
