228 DECKEL używana maszyna na sprzedaż

Frezarka DECKEL FP5NC -oś: X-710 Samolot Y-600 Z-500

x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm

x-travel:1250 mm y-travel:880 mm z-travel:800 mm control: Heidenhain TNC 430 tool change unit:60 Pos. Tool bore:SK 50 turning speeds:8000 1/min size of pallet:1000 x 800 mm total power requirement:56 kVA weight of the machine ca.:14,3 t dimensions of the machine ca.:5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:12.000 1/min tool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fach size of pallet:630 x 630mm mm spindle:52 kW / 430Nm total power requirement:87 kVA weight of the machine ca.:15 t dimensions for transport:4,6 x 2,95 x 2,7 m horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours

x-travel:800 mm y-travel:700 mm z-travel:600 mm table load capacity:800 kg control:SIEMENS 840D shopmill turning speeds:12.000 1/min tool adaptor:HSK 63 rapid traverse:50 m/min tool change unit:30 Pos. electr. connected load with add. coolant:56 kVA weight of the machine ca.:9,5 t transport measurements machine:4 x 2,5 x 2,75 m 5 Axis simultaneously machining center, Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm, internal cooling device 40 bar, 600l prepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe), prepared for el. handwheel (without handwheel), mode 4, approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h)

x-travel:560 mm y-travel:500 mm z-travel:450 mm

x-travel:560 mm y-travel:500 mm z-travel:450 mm

x-travel:750 mm y-travel:600 mm z-travel:520 mm table surface area:D 700 x 500 mm turning speeds:30000 1/min tool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos. rapid traverse:50 m/min table load capacity - central/maximum:350 kg total power requirement:50 kVA weight of the machine ca.:9 t dimensions of the machine ca.:3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, spindle chiller, no internal coolant supply, approx. 124.200 hours "machine on", approx. 60.600 hours "spindle on" in total

x-travel:600 mm y-travel:450 mm z-travel:400 mm Table area:700 x 480 mm spindle turning speed range:10 - 3150 U/min spindle taper ISO:40 quill stroke:80 mm dimensions of the machine ca.:1,8 x 2,1 x 1,9 m total power requirement:8 kW weight of the machine ca.:3,5 t Machine with universal turn, sviwel and tilting table - CNC control DIALOG II - splash guards - misc. parts

x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t

x-travel:560 mm y-travel:500 mm z-travel:450 mm total power requirement:16,5 kVA weight of the machine ca.:2700 kg dimensions of the machine ca.:2,30 x 3,0 x 1,90 m control:Grundig quill stroke:80 mm tool taper:SK 40 spindle speeds::40..4000 1/min feed:2 .3600 mm/min rapid traverse:4000 mm/min Documents:vorhanden

X-Travel: 1200 mmy-Wzrost: 600 mmZ-Skok: 500 mmSterowanie: Dialog 11 zakres prędkości obrotu: 0 - 6,300 Stożek U/minspindle ISO: 40 całkowite zapotrzebowanie mocy: 10 kWweight maszyny, ok: 8 tdimensions maszyny: 4 x 3 x 2,5 mDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

średnica tulek do zaciągania: - mmwewnętrzny stożek tulek do wciągania: - maksymalny promień do szlifowania: - mmcałkowite zapotrzebowanie na moc: - masa kWweight maszyny: ok.: - toxyment maszyny ca.: - mStichelschleifmaschineDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-Travel: 500 mmy-Wzrost: 400 mmZ-Wzrost: 400 mmCałkowite zapotrzebowanie mocy: 4,4 kWweight maszyny, ok.: 2 toxymetry maszyny: 222,2 mDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

powierzchnia: 420 800 mmno. fletów: 9 rowków szerokość: 12 / Około 45 mm masa maszyny, ok.: 110 kg, wymiary maszyny: 10,50,3 mDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

x-travel: mmy-travel: mmz-travel: mm całkowite zapotrzebowanie na energię: kWweight maszyny, ca.: wymagana przestrzeń: mDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm CNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/min table-size: 620 x 390 mm table load: 250 kg power capacity: 5,5 kW feeds -stepless-: 2 - 6.000 mm/min quill stroke: 80 mm coolant: voltage: 380 V total power requirement: 11,0 kVA weight of the machine ca.: 1,65 t dimensions of the machine ca.: 1,85 x 1,90 x 1,80 m electric cabinet: 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: Siemens ergoline table surface area: 2x 790 x 560 mm number of pallets: 2 rapid traverse: 30 m/min turning speed range: 8000 U/min power capacity - milling spindle: 13 kW no. of tools in the magazine: 30 Stück tool taper: SK 40 | | weight: 5,2 t dimensions: 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-Travel: 500 mmy-Skok: 200 mmZ-Skok: 400 mmPowierzchnia powierzchni: 700 x 300 mmStożek narzędzia: SK 40 - S20 podaj: 8 - 400 mm/ minszybki obrót: w X und Z 1200 mm / prędkości obrotowe: 40 - 2000 U/min/całkowite zapotrzebowanie mocy: 2,2 kW masy maszyny, ok.: 1400 kg, ok.: 1500 x 1200 x 1600 mmZawiera dwuosiowy wyświetlacz cyfrowy HeidenhainDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania oprogramowania LogoTech oHG.

x-przesuw: 800 mmy-podróż: 300 mmz-podróż: 350 mmcałkowite zapotrzebowanie na moc: 3 kWwaga maszyny ok.: 2 twymiary maszyny ok.: 222 mDane do tej reklamy zostały utworzone za pomocą ModulMWS - rozwiązania programowego firmy LogoTech oHG.

x-travel: 650 mm y-travel: 500 mm z-travel: 500 mm control: Siemens 840 D table surface area: 800 x 500 mm rapid traverse: 60 m/min table load: 1,5 t turning speed range: 0 - 18.000 U/min max. torque on the spindle: 130 Nm power capacity - milling spindle: 15 kW no. of tools in the magazine: 30 Stück tool taper: HSK 63 A | internal coolant system feed: 40 bar weight of the machine ca.: 10,5 t dimensions: 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.