溶接機 中古 販売のため (1,665)

Table dimensions: 1200 x 1200 mmtable load: 7000 Kgswivelling range: 105 Gradturning speeds: 0,07 x 0,6 U/minheight adjustment: 1450 - 2450 mmhollow spindle diameter: mmwelding current: 1000 Amperemax. torque on the faceplate: 14000 Nmtotal power requirement: 8,2 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this  ...

Table dimensions: 1000 x 1000 mmtable load: 2500 Kgswivelling range: 105 Gradturning speeds: 0,15 - 2,0 U/minheight adjustment: 1010 - 1836 mmhollow spindle diameter: mmwelding current: 700 Amperemax. torque on the faceplate: 5000 Nmtotal power requirement: 6,0 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this ad ...

number: 53 Positionenweight: 45 kgcondition: neu 0Basic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 900 mmtable load: 2000 Kgweight of the machine ca.: 0,24 tdimensions: 1,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 10000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,5 + 3,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/min: 900 Nmtotal power requirement: 0,37 / 0,37 kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 800 x 800 mmtable load: 1500 Kgswivelling range: 0 - 105 Gradturning speeds: 0,15 - 1 U/minheight adjustment: 672 - 1180 mmhollow spindle diameter: mmwelding current: 500 Amperemax. torque on the faceplate: 3000 Nmtotal power requirement: 0,75 kWdimensions of the machine ca.: 1560x1120x750 mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The dat ...

table length: 2900 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,9 tdimensions: 2,9 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mmtable load: 6 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 12000 Nm0: 1,5 / 2,2 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 2,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1300 - 2050 mmmax. torque on the faceplate: 10000 Nmengine output: 1,5 / 1,5 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

溶接電流:30 - 200 A接続された負荷周波数:230 V重量:3,6 kg寸法(LxWxH):290 x 135 x 2600 mm納入範囲:TIG溶接機Buddy TIG 160電極およびアースケーブル3mTIGトーチET 17 4mユニオンナット付きガスホー�

溶接電流:15 - 40 A切断能力:1 - 16 mm開回路電圧:96 V必要空気圧:最小4バール接続負荷:3,6 kW接続負荷周波数:230 V重量:9,0 kg寸法(LxWxH):371 x 153 x 232 mm展示機アクセサリー付きインバータープラズマカ� �ター:4mケーブル付きカッティングトーチ、2.5mケー� �ル付きアースクランプ、空気圧ゲージ、マスクとブ ラ�

数:24ポジショネン重量:22kg状態:neu 0基本セット1/24個テーブルトップ厚15・25mm用4個クラ� ��プ、クランプ高さ300mm、可変投影8本クランプボル� �2個ストップ100mm4個 ストップ150mm2個ストップ225mm1個トーチホルダー1個 穴あきブラシ30mm1個 セパレーティングローション500ml1個自然、生物学的� ��基盤の溶接テーブルクリーナー500ml

最大重量:1000 Kgワーク直径:20 - 800 mmドラム直径:200 x 50 mm送り:80 - 1600 mm/分総電力要件:0,23 kW機械の寸法約:2 Stk. 0,45x,039x0,33 m

clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 1,2 tswivelling range: 0 - 120 Gradturning speeds: 0,06-0,6 U/minmax. torque on the faceplate: 2400 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,75 + 1,1 kWweight of the machine ca.: 1,0 tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mmheight: 110 mmdaylight: 240 mmexternal diameter: Futter 320 mmexternal diameter: Spannhebel 700 mmweight: 56 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mmweight of the machine ca.: 0,45 tWelding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmHeight adjustable from approx. 920 - 1000mmRibbed bottom for reinforcement.including floor storageAccessories optionalAccessories shown are optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,5 tdimensions: 1,4 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mmtable width: 2000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 2,5 tdimensions: 4,0 x 2,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ブランソンの超音波溶接装置が利用可能です。周波� ��:20kHz、電力:900W、ストローク:100mm、690kPaでのクラン プ力:1.96kN、ダイナミックリリース:67N-734N。ドキュメ ントが利用可能です。立入検査が可能です�

Kukaロボットと2x Dins溶接ソースを含むAkon溶接セルが利用可能です。1) 溶接ロボット:Kuka KR 6 R900、可搬重量:6kg、リーチ:900mm、制御:KR C4 コンパクト、フランジ荷重:25kg、総重量:約170kg。2) 自動溶接セル Akon Robotics ターンテーブルと Kuka 制御システム付き。3) 溶接の電源Dinse Dix PI 900。2023年に4軸のEPモーターを交換。ドキュメントが 利用可能です。立入検査が可能です�

自動ストレージシステムLKIを搭載したCNC CO2レーザー切断機アマダが利用可能です。1)レーザ� �出力:4kW(4000W)、移動X / Y / Z:3100mm / 1550mm / 100mm、最大テーブル荷重:920kg、最大材料厚さ鋼/ステ� ��レス鋼/アルミニウム:20mm / 12mm / 10mm、レーザーシステム寸法X / Y / Z:約10000mm / 4300mm / 2100mm、重量:約11000kg。2)パレット:8、切断パレット:2� �原材料:2/3、荷降ろし:4/3、最大荷降ろし高さ:2200mm、 最大材料寸法X/Y:3050mm/1525mm、最小シート寸法:2000mm/100 0mm、高さ:5400mm。立入検査が可能です�

移動距離X / Y / Z:2520mm / 1550mm / 300mm、最大シート寸法X / Y:5040mm / 1550mm、最大材料の厚さ軟鋼/ステンレス鋼/アルミニ� �ム:12mm / 6mm / 3mm、最大ワーク重量:330kg、位置決め速度:80m / min / 80m / min / 60mm / min、位置決め精度:+/- 0.01mm。機械寸法X/Y/Z:約5650mm/3650mm/2100mm、重量:約6600kg� ��稼働時間:29499時間(ファナックレーザーモデルC1500� �含む)。ドキュメントが利用可能です。立入検査が� �能です�

負荷:335mm:3000kg、450mm:2400kg、660mm:1900kg、825mm:1600kg、111 0mm:1200kg、最大回転直径90:1600mm、速度:1.2rpm、135:30秒� �傾斜時間、ギアボックス:ベーリンガーシュトゥル� �、ギアボックスタイプ:2DA 11オイルギアボックス。立入検査が可能です�

耐荷重:25t、重心距離:700mm、偏心:250mm、速度:0.66rpm、� ��斜範囲:0-130、傾斜時間:120秒、テーブル高さ(フラッ ト):1930mm、回転軸高さ:1600mm、テーブル直径:2500mm、モ ーター出力傾斜/回転:7.5kW/4.5kW、全長:3000mm、全幅:2500 mm。立入検査が可能です�