Ersatzteile - スペアパーツMBマルチプリ382 MB 382 のための2つの折りたたみバックルMBの382 オンラインビデオ検査Skypeビデオ による検査 私たちはあなたの訪問に非常に満足しているでしょ - 在庫 のより多くのマシンすぐに利用可能 - 在庫のEmskirchen / Nürnbergで検査 することができます - テスト することができま
Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464S Serial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
最大サイズ 68 x 104 cm 建設年:2003年 ナビゲーター制御 ラピッドセット - 折りたたみポケットのモーター式フォーマット調整 パレットフィーダーFP 700 真空リフト Vivas(真空帯+真空型) 第1ステーション:6折りたたみポケット 68cm 下流ナイフシャフト 2番目のステーション:4折りたたみポケット 68 cm 下流ナイフシャフト コールドグルー用の接着装置HHS シェッドエクステンション ASP 66-2 ME 納期:在庫から直ち
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V -Dimensions: 95/70/H35 mm -Weight: 0.4 kg
table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,6 - 6,0 U/min bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating ins ...
total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software ...
table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,5 U/min bore: 90,0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90,0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...
table load: 1000 kg table diameter: 900 mm turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
幅 52 cm 建設年:2002年 自動紙折り機 モニター付きコンピュータ制御 フラットパイルフィーダーFSA 52、サクションヘッド付き 1stステーション:4つの折り畳みポケット52 cm 下流のナイフシャフト 2ndステーション:4つの折りたたみポケット52 cm 3番地:折りたたみポケット2つ、38cm 小屋のディスプレイ 価格はお問い合わせください。 世界中に配送してインストールします!
中古
バックル:最大4 個 紙サイズ:52 x 85 cm シリアル番号:984580044 速度:200 m /分 倍深さ最大46,5 cm 紙量40-250 g /m² フルサイズ10 x 12 cm
バックル:4個 ナイフ:0個 最大用紙サイズ:52 x 85 cm シリアル番号:98979071 速度:200 m/分 電圧:3 x 400 V 周波数:50 Hz 寸法:3 x 1m + 1,80 x 1 m 折り目深さ 最大46,5 cm 紙坪量 40-250 g/m² フルサイズ 10 x 12 cm
Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
