溶接機 中古 販売のため (1,665)

table length: 3000 mmtable width: 1500 mmtable height: 850 mmside-clamping surface:: 200 (Höhe) mmweight: 1518 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Distance between holes in side wall 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including 28 tool set 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Plasma nitrided version with scale- incl. 6x base equipment- incl. 28 tool ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 1069 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard.Special set - including 28 tool set 3Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Surface holes in a diagonal grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresPlasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimension ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 537 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Plasma nitrided version with scale- including 6x base equipment- incl. 16 tool set 3:+ 8x 160610.N c ...

table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 354 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Plasma nitrided version with scale- Including 4x basic equipment- incl. 16 tool set 3:+ 8x 160610.N  ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- Extreme plasma ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 949 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilling surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines allow for precise buildsThe welding tables are provided with a scale as standard.Plasma nitrided version :- Protection from rust/scratches/weld spatter adhesion- more corrosion resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- pl ...

weight max. in kg: max. 1000 kgturning speeds: 0,18 - 0,58 U/minheight: 976 - 1436 mminclination: 0 - 115 °table diameter: 895 mmvoltage: 380 Vtotal power requirement: 2,0 kWweight: 685 kgrange L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on requestThe AK BEND SRH hydraulic welding positioner is idealfor welding, assembly and maintenance work. Positioning is done via ahydraulic rotation and tilting function.Description:- electro-hydraulic turning and tilting function- Fast handling of workpieces- Maximum productivity thanks to optimal working position- Lifting, tilting and turning workpieces in one clamping- Low idle times thanks to turning components- Maximum work performance thanks to comfortable working- Back-friendly working for the userEquipment:- Continuously variable speed adjustment- Freely movable foot ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- High-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Bore diameter 28 mm- Surface holes with a 100x100 mm grid- Rounded corners, edges, and holes- Side panel height 200 mm- Side panel hole spacing 50 mm- Surface scale included- Construction reinforced with ribs- Grid lines enable precise setupsThe welding tables are equipped with a scale as standard.Plasma nitrided finish:- Protection against rust, scratches, and weld spatter adhesion- More corrosion-resistant / higher load capacityFeatures:- 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm- Plasma nitrided finish (750) with scale- Includes 4x base feetThe data for this ad was created with ModulMW ...

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 100 mmweight: 726 kgThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 3000 x 1500 x 100 mm- Plasma nitrided version Professional 750 with scale- Including 8x basic equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: 1600 m3/hfeed volume: 99,9 %length: 3.000 Absaugschlauch mmmotor: 230 Voltmotor: 1,1 KWweight: 80,0 kgrange L-W-H: 580 x 580 x 900 mmDescription:The filtoo filter device newly developed by TEKA isa mobile filter system that manyTasks in the field of filtration ofSmoking, dusts and gases can be used.Also suitable for high-alloy steels (stainless steel).(the device was based on DIN EN ISO 15012-1 (2005)tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140)for welding smoke class W3 (degree of separation:> 99.9%))Where can the SIG 230 filtoo be used?- at welding workplaces- in the workshop area- for soldering applications- with restorers- in locksmithsFurnishing:- BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals- Operating instructions in Germanoptional equipment for a surcharge (recommended)- Retrofi ...

table diameter: 500 mmtable load: 300 horizontal kg.table load: 150 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,5 U/minbore: 90,0 mmtable height: ~ 650 mm mmmotor: 230 Voltweight of the machine ca.: 90,0 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be tilted and clamped at an angle of 0 ° to 90 °- manual tilting- Start / stop via location-independent foot switch- Direction of rotation can be selected right / left- Adjustable rotation time- The control of the welding machine via control- 350 amp ground connectionScope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 340 mmtable load: 290 horizontal kgtable load capacity: 190 vertikal kgturning speeds: 0,6 - 6,0 U/minspindle bore: 60,0 mmswivelling range: 0 - 90 Gradweight of the machine ca.: 62 kgdimensions of the machine ca.: 380 x 340 x 425 mmFurnishing:- The table can be tilted and clamped at an angle of 0 to 90- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time.- The turntable has a 60 mm hollow shaft.- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- Operating instructions in GermanFunctions of the COM 1000 con ...

cutting range for steel to: 35.0 TS mmcutting range for steel to: 25.0 QS mmampere: 20 - 65 Amperecutting medium: Druckluft voltage: 400 Voutput: Eingang 7.8 KWweight: 51.5 kgrange L-W-H: 595 x 250 x 890 mmAvalon 65 AIR with integrated compressorCutting - clean and reliableThe air plasma cutting system Avalon 65 AIR with integratedCompressor is your reliable partner for the demandingMission. Make separation cuts up to one with the Avalon 65 AirMaterial thickness of 18 mm.Characteristics :- IGBT technology- with integrated compressor- Microprocessor control system for excellent and dynamic. Arc properties- CNC interface- HF-free arc starting system for increased reliability. and low EMF exposure- Manual switch to activate airflow around test air pressure. without having to trigger the burner- Intelligent protection function protects the plasma torch. from damage such as incorrect air pres ...

table load: 1000 kgtable diameter: 900 mmturning speeds: 0,12 - 1,2 U/minswivelling range: 0 - 135 Gradspeed: Kipp 0,35 U/minwelding current: 500 Adimensions of the machine ca.: 1475 x 1050 x 900 mmFor heavy industryWhen choosing a turntable, it is essentialTurning and tilting torque must be taken into account. To noteapplies to how far the center of gravity of the workpiece is from theThe faceplate is away or how far the center of gravity isis eccentric from the center. By means of aRotary and tilting tables can be used to optimize workpiecesposition for welding.- Robust construction.- Infinitely variable.- Hand remote control.- HF protected.Furnishing :- 1 control (integrated)- 1 wired remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

銃:PH-3N、電圧:400V、重量:50kg。取扱説明書、クランプ BMS/BMK付きアースケーブル2本、ガス接続、HZスタッド ホルダー、アダプターピース、キーが付属していま� ��。現地検品が可能です�

ファーマー EL2100 溶接工 230および400V 冷却ファン付き および駆動装�

このオファーは、BGB第14条の意味における起業家の� �を対象としています。価格は正味に19%の付加価値税 を加えた価格です。 メーカー:ARO タイプ: M 302 製造年:1971年 1063655号 380 V ~50/60Hz E 100 100 すべての情報は、エラーを除き、当社の知る限り作� ��されています。 販売は保証の対象外となります。この除外は、売主� ��義務の重大な過失または故意の違反、または生命� �身体、健康への傷害から生じる損害賠償請求には適 用されません。 さらに法的情報は、Witzenmann GmbHのWebサイトで、「インプリント」、「利用規約」 、「データ保護」というキーワードでご覧いただけ� ��す�

このオファーは、BGB第14条の意味における起業家の� �を対象としています。価格は正味に19%の付加価値税 を加えた価格です。 溶接機タイプ:ロールシーム溶接機 メーカー:ニマック タイプ:NMP 7/100 製造年:1971年 機械番号71059 定格電力:50%EDで100kVA 接続負荷:175 kVA 一次電圧:380V 開回路電圧:7.3V 秒 Str. dd/max. 8/33 kA 電極力:750 kp 周波数:50 Hz 最大8.8V 6 ATUで すべての情報は、エラーを除き、当社の知る限り作� ��されています。 販売は保証の対象外となります。この除外は、売主� ��義務の重大な過失または故意の違反、または生命� �身体、健康への傷害から生じる損害賠償請求には適 用されません。 さらに法的情報は、Witzenmann GmbHのWebサイトで、「インプリ� ...

スポット溶接ガン --- 50%EDでの定格電力:22kVA 短絡電流:17kA 電極力:360daN/シングルストローク プロジェクション:95mm --- - 電極アーム AE/2/96g + C34/2/63g --- 溶接制御:ご要望に応じて --- ご要望に応じてスプリングバランサー --- 保証期間 6ヶ月 --- トレーニング+ご要望に応じて試運転 --- スポット溶接電極+スペアパーツは在庫から入手可能

Key data: 25 kp, 150 , 120

50%EDでの定格電力:25kVA 短絡電流:12kA 電極力:120daN/シングルストローク 投影:150mm --- 溶接制御:AR.01(5回、2プログラム) --- 追加オプションを含む: -フットスイッチ -メインスイッチ - アルミプレートに取り付け --- 保証期間 6ヶ月 --- トレーニング+ご要望に応じて試運転 --- スポット溶接電極+スペアパーツは在庫から入手可能

Key data: 63 kp, 750 , 600

50%EDでの定格電力:63kVA 短絡電流:26.3kA 電極力:65-390daN /シングルストローク スロート:450-750mm --- 溶接制御:MPS 15036(5回、1プログラム) --- 追加オプションを含む: - 「非通電」タッチダウン付きフットスイッチ -メインスイッチ --- 保証期間 6ヶ月 --- トレーニング+ご要望に応じて試運転 --- スポット溶接電極+スペアパーツは在庫から入手可能

中周波スポット溶接機Dalex-Werkeが利用可能です。ス� �ート深さ:350mm、電極ストローク:90mm、電極ホルダー� ��:30mm、電極テーパー:MK2、20%デューティサイクルで� �定格電力:180kVA、最大溶接電力:200kVA、一次電圧:400V� �定格周波数:1000Hz、電極力:20daN〜600daN。重量:約575kg� �コントロール:HWS 2102。ドキュメントが利用可能です。現地検品が可能 です�

特に工具および金型製造業界では、非接触レーザー� ��工および複雑な形状の測定用の CNC 6 軸レーザー精密機械が利用可能です。移動X/Y/Z:300mm/4 00mm/500mm、テーブル寸法X/Y:300mm/400mm、機械/光学軸:3/3� ��測定システム:非接触SIセンサー、測定精度:+/-0.01mm� ��表面仕上げ:Ra 1μm未満、動作時間:21045時間、処理時間:6549時間。レ� ��ザー(Prisma)に欠陥があります。ドキュメントが利用 可能です。現地検品が可能です�

Peco 溶接機スポット溶接機 フラットストリップとエレクトロのPeco溶接システム 溶接。管理 Peco LA 40 エアコントロール ボッシュE35...DYF溶接制御 新品および中古の他のサイズの溶接システムを当店� ��見つけることができます。 国際送料はご要望に応じて!

溶接電流: 20 - 100 A切断能力: 最大35mm mm開回路電圧: 250 V等価空気圧: 最小4 bar接続負荷: 20 KVA接続負荷周波数: 400 V重量: 0.7 kg寸法 (LxWxH): 1.0 x 0.6 x 0.8 mmカート付きプラズマ切断機 - 7mホースパッケージ付き - スペアノズルこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

溶接電流: 30 - 100 A切断能力: 最大50mm mm開回路電圧: 170 V等価空気圧: 最小4 bar接続負荷: kW接続負荷周波数: 400 V重量: 0.75 kg寸法 (LxWxH): 1.2 x 0.7 x 1.0 mmカート付きプラズマ切断機 - 105 RTXトーチ - 7mホースパッケージ付き - スペアノズル - 新品同様、すぐに使用可能この広告のデータは、Logo Tech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

CNCガントリー火炎切断機ESABが利用可能です。トラッ ク幅:4000mm、切断寸法X/Y:3000mm/6000mm、トラック長:8000mm 、トラック高さ:465mm、テーブル高さ:700mm、切断速度: 24m/min、火炎切断テーブル寸法X/Y:3100mm/6180mm。切断プ� ��セス:酸素燃料/プラズマ、トーチ:Cooljet-Pro、プラズ マ源:m3 202 EPP 202 GEN 2、プラズマトーチ:PT-36。フィルター容量:9000m³/h、� �ィルター面積:180m²、粒子サイズ:0.1μm。プラズマ源� ��却システムを修理する必要があります。ドキュメ� �トが利用可能です。現地検品が可能です�

table length: 2400 mmtable width: 1200 mmtable height: mm: 4000 kgheight of stroke: 510 - 1550 mmtotal connected load: 1,5 kWconnected load frequency: 400 Vweight of the machine ca.: 0.95 tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC CO2 レーザー切断機 Bystronic Bystar 3015 レーザー光源:ByLaser 4400、レーザー出力:4400W(4.4kW)、 作業領域X / Y / Z:3000mm / 1500mm / 170mm、 最大ワーク重量:890kg、 位置決め精度:+/-1mm、繰り返し精度:+/-0.05mm、早送り:5 0m/min、 最大材料の厚さ軟鋼/ステンレス鋼/アルミニウム:25m m / 20mm / 12mm、 シート重量:160kg /m²。 制御:ByVision CNC、 ビデオはお問い合わせくださ�

オファー 25238 仕様： - 最大積載量(水平テーブルトップ時) 350 Kg - 最大傾斜位置での耐荷重 300 kg - フェースプレート直径400mm - スルーホール/中空シャフト 125 mm ●フェイスプレート 手動式 左+右スイベル 0-90 - 回転運動はほぼ無限に可変 0.15 - 5.0 1/分 - 右 + 反時計回り - E.フットスイッチ - 溶接電流伝達約 350エーカー - 駆動 400 V - 水平位置でのテーブル高さ約 900ミリメートル - 必要なスペース 幅1150×高さ900×奥行800mm ●重量約 290キロ - ジョーチャック 250 mm