溶接テーブル (152)

Lg.Nr. 26071 技術データ: - 積載能力 650 kg - フェイスプレート寸法:700 x 700 mm - フェイスプレート モット。無限に傾ける 0 - 135 ° - MOT回転数無限調整 0.07 - 1.5 rpm - 水平位置のテーブル高さ890mm - E. コントロールボタン - スペース要求量 約幅850×幅890×幅1200mm - 重量は約400 kg

Serial number: S220320Diameter of the turntable: 330 mmLoad capacity Horizontal: 350 kgLoad capacity Vertical: 120 kgMotor power: 125 Wwith foot pedalwith manually adjustable swivel axison frameWorking height: approx. 1000 mmReference: Schiller - Lot 20 Auction-ID: A7-46763-191

オファー 25349 仕様： - 長さ約 3000ミリメートル - 幅約 2000ミリメートル ●プレート高さはリブ付き約。 400ミリメートル ●天板厚約 80ミリメートル - ベース付きのテーブルの高さ約。 820ミリメートル - 重量約 6500キロ

Important note: the yellow bars shown in the pictures, as well as all welding accessories (trolleys with welding hoses and torches etc.) are not included in the sales and scope of deliveryMobile table with perforated plate (was used for welding)incl. clamping accessories for the perforated plateincl. a mobile table with wooden plateDimensions of the perforated plate: 2000 x 1200 mmReference: Schiller - Lot 18 Weight: approx. 1200 Auction-ID: A7-46763-189

Lg.Nr. 25075 モット。溶接ロータリーおよび傾斜テーブル 仕様： - 耐荷重 1000 kg - フェースプレート 直径 800 mm - フェイスプレートはモーターで傾けることができま� �� - 回転運動電動機。無段階可変 0 - 250 cm/min - 溶接電流伝達 650 A - 駆動 400 V / 2.8 kW - 水平位置でのテーブル高さ約 1100ミリメートル - 再-+反時計回りの回転 - 必要なスペース 幅1200×高さ1100×奥行1500mm ●重量約 850キロ

10 pcs quick-release clamping bolts for 28mm system Clamping range from 5 to 50mm Quantity: 10 pcs. Clamping range 15 - 50 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-46642-97

Key data: 1180 mm, 990 mm, 765 mm

重い溶接およびクランプテーブル 1,180×990ミリメートル 高さ765ミリメートル クランプ溝幅34 mm 材料の厚さ40 mm 重量 約1,020kg

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-46642-88

機械タイプ:溶接回転テーブル 車名: マークル/コンツェルマン タイプ CD 50/25 - 320 接続電圧 1 x 230 V 速度範囲0.25〜2.5 rpm、無限に可変 速度制御1:10 トルク 2.5 – 10 Nm フェースプレート直径 250 mm フェースプレート-内部通路10 mm フェースプレート135の傾斜角度 垂直負荷容量 0.5 kN = 50 kg テーブルの高さ 320 mm 傾斜動作手動、クランプ可能 転倒トルク 90 Nm パンタグラフ 400 A 80 % 直流 接続用-フットスイッチが簡単 - ダブルフットスイッチ - フットリモコン 年齢 3 年 条件: 新品同様 重量44キロ 保証 納品日から24ヶ月 元の価格 €2,198.00 + 付加価値税 オファー価格 €1,690.00 + 付加価値税 フットスイッチは3mtrケーブルでシンプル 2 ...

XXL starter package, consisting of: - 15x – Standard clamping pliers - 5x – Multi-clamping pliers - 10x – Side clamp with eccentric - 15x – Loose Cam H30 - 10x – Loose Cam H100 - 2x – Pipe Insertion Knock Series - 10x – quick-release bolts - 10x – Stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – Angle of attack - 1x – Box - 1x – Insert holder - 1x – Allen key - Tool trolleys Number of 100 Lots Hole diameter 28 mm Condition new Weight 280 kg Dimensions L x W x H 1.2 x 0.5 x 1.3 m Condition: never used / new (5) Auction-ID: A7-46642-116

溶接用ヒューム抽出台 溶接用テーブル DCE UMA150HG5 除塵 フィルター付き一体型吸引付き溶接テーブル メーカーのダストコントロール機器集塵機 タイプ UMA 150H G5 写真に従って休む

Siegmund workbench incl. accessories - Consisting of screw clamps, hand clamping bolts, surface clamping bolts and brackets. - Frame made of aluminium profiles - Working height 900 mm - Surface made of aluminium table profiles - Bore Ø 16 mm - Bore spacing 50 mm - Hexagon Nut HX8 - Hexagon groove spacing 50 mm - When clamping aluminium parts, the bolts must only be tightened by hand. Table length 1200 mm Table width 700 mm Table height 900 mm Table load 250 kg Machine weight approx. 36 kg Dimensions L x W x H 1.2 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46642-121

仕様： -負荷容量位置決めテーブル約。 750キロ -フェイスディスク直径500ミリメートル -ワークピースの直径1600ミリメートル -水平位置約の高さターンテーブル。 750ミリメートル - 右のターンテーブル、 - +左回転 -回転軸ターンテーブルエンドレス360 ●1回転あたりの回転時間12.5秒 - 左+右に回転 ●旋回軸回転角度180 ●旋回時間は180回転角10秒。 -ターンテーブル+スイベルアーム用の2×ダブルフッ� �ボタン - ハイド。ターンテーブルの中央にあるワークピース� ��クランプするためのクランプボルト -クランプボルトのクランプストローク/クランプ移� � 32 mm -クランプ力プレス/引っ張り80 / 48.9 kN -クランプシリンダー雌ねじM 27 x 40 -ポジショニン� ...

Siegmund Set 2, 57-piece, 28mm system, consisting of: 18x quick-release bolts with twist lock short, without O-rings 6x Universal Stop 150 L - Nitrided 6x Universal Stop 225 L - Nitrided 4x Stop and clamping angle 175 L - Nitrided 2x Stop and clamping bracket 300 G left - Nitrided 2x Stop and clamping angle 500 G left - Nitrided 4x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 6x Professional Screw Clamp - Nitrided 4x Professional Screw Clamp 45°/90° - Nitrided 4x Magnetic Bolts Aluminium 1x accessory set (283999) consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5) Auction-ID: A7-46642-144

Mobile Welding Lift Table/Perforation Table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 1200 mm Table width 800 mm Hole diameter 28 mm Table height 450 - 800 mm Load capacity 500 kg Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-46642-72

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 840 - 890mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 1200 mm Table width 800 mm Table height 840 - 890 mm Machine weight approx. 0.3 t Condition: never used / new (5) Auction-ID: A7-46642-51

Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 clamps clamping height 300mm, projection variable 8 pcs clamping bolts 2 pcs stop 100mm 4 pcs stop 150mm 2 pcs stop 225mm 1 Burner Holder 1 pc. hole brush 30mm 1 pc separating lotion 500ml 1 pc. Welding Table Cleaner on a natural, organic basis 500ml Number of 24 Positions Weight 22 kg Auction-ID: A7-46642-189

Welding table / hole table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 4000 mm Table width 2000 mm Hole diameter 28 mm Table height 815 mm Machine weight approx. 1.3 t Auction-ID: A7-46642-118

10m Screw Clamps Projection 120mm Length 300 mm Condition new Hole diameter 28 mm Number of 10 Lots Weight 30 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-46642-213

10 pcs quick-release clamping bolts - 28mm hole system - For 25mm table thickness Quantity: 10 pcs. Clamping range 25 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Auction-ID: A7-46642-149

Welding table \"SIGMUND Professional 750 + plasma nitrided\" is made of high-quality S355J2+N steel. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides. Incl. basic foot equipment. Without accessories shown. Table length 2400 mm Table width 1200 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 0.99 t Dimensions L x W x H 2.4 x 1.2 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46642-32

Basic Set 2 / 32 pieces for table top thickness 15 and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 2 pcs universal stop 100mm 4 pcs universal stop 150mm 2 pcs universal stop 225mm 2 pcs stop and clamping angle 175mm 1 pc. hole brush 300mm 1 Burner Holder 1 non-stick spray 500ml, natural, organic 1 pc. welding table cleaner 500ml, natural, organic based Condition: never used / new (5) Auction-ID: A7-46642-156

Special Set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art.Nr. 4028397 3x Pipe Screw Clamp D28 180° – Art.Nr. 4028396 3x Pipe Screw Clamp D28 45° – Art.Nr. 4028398 3x Pipe Screw Clamp D28 300x150 – Art.Nr. 4028399 3x Pipe Screw Clamp D28 300x200 – Art.Nr. Reference 4028400 15x Ball Lock Pin D28x50 – Art.Nr. 4027663 10x Stake-out bolts D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028658 2x Stop Clamping Bracket D28 175x50x175x25 mm – Art.Nr. 4028649 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028652 2x Stop  ...

5 pcs screw clamps for hole diameter 28mm Projection max. 245mm Handle made of aluminium see pictures Condition: never used / new (5) Auction-ID: A7-46642-198

Basic Set 2: 51 pieces, 28mm system, consisting of: Ferrules: 8 x 280604 Bolts: 12 x 280511 Stop: 8 x 280420.N Angle: 4 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 2 x 284050 Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-46642-163

Welding table accessories P-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of: Clamps: 5 Sk.100/350 mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175 mm Flat angles: 2 pieces. 350 x 250 mm Flat brackets: 2 pieces 275 x 150 mm Eccentric discs 2 pcs. 100mm Quick-release screws: 10 pcs. Number of 33 Lots Weight 52 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-46642-174

Welding table \"SIGMUND Professional 750 + plasma nitrided\" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides. Incl. basic foot equipment. Without accessories shown. Table length 3000 mm Table width 1500 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 1.5 t Dimensions L x W x H 3.0 x 1.5 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46642-26

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-46642-96

Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 1300 mm Table width 800 mm Load capacity 1000 kg Lifting height 510 - 1550 mm Total connected load 1.5 kW Connection voltage 230 V Machine weight approx. 0.55 t Condition: never used / new (5) Auction-ID: A7-46642-27

10 pcs quick-release clamping bolts for 28mm system Plate thicknesses 25mm Quantity: 10 pcs. Hole diameter 28 mm Weight 10 kg Dimensions L x W x H, 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-46642-244

Set 1 - 33 pieces, 28mm system, consisting of: 12x quick-release bolts with twist lock short, without O-rings 4x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 2x Stop and Clamping Angle 175 L - Cast Iron 2x Stop and clamping bracket 300 G left - Nitrided 2x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 4x Professional Screw Clamp - Nitrided 2x Professional Screw Clamp 45°/90° - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5) Auction-ID: A7-46642-128

Basic Set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolts: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Hole diameter 28 mm Condition new Weight 29 kg Condition: never used / new (5) Auction-ID: A7-46642-135

Welding table / hole table with accessories: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t without pallet truck Condition: never used / new (5) Auction-ID: A7-46642-114

Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 2000 mm Table width 1000 mm Load capacity 2000 kg Lifting height max. 1525 mm Total connected load 1.5 kW Connection voltage 400 V Condition: never used / new (5) Auction-ID: A7-46642-2

Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Sanded surfaces, ground flat. Hole diameter: 28mm, holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Auction-ID: A7-46642-78

Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolts: 36 x 160511 Magnetic Bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Number of 106 Lots Weight 283 kg Condition new Hole diameter 28 mm Auction-ID: A7-46642-235

Special set 31 pieces, 28mm system, consisting of: 1x Tool Trolley 10x Staking Bolts 10x Ball Lock Pin 3x Professional Screw Clamp, 300 x 150mm 3x Professional Screw Clamp, 300 x 200mm 2x Professional Pipe Screw Clamp 180° 2x Professional Pipe Screw Clamp 45° Material: Burnished quality steel ATTENTION Tool is designed for 25mm table top thickness. Number of 96 Lots Weight 600 kg Condition new Hole diameter 28 mm Auction-ID: A7-46642-132

Marking table with groove 22 x 22mm Table area 1600 x 800mm Table height 890mm Weight 800Kg see pictures Auction-ID: A7-46642-253

Welding table \"SIGMUND Professional 750 + plasma nitrided\" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides. Incl. basic foot equipment. Without accessories shown. Table length 2000 mm Table width 1000 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 0.75 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46642-17

Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Condition: never used / new (5 ...

Welding table / hole table: with milled and deburred holes Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Technical data: Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Auction-ID: A7-46642-129

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. - With drawer unit - Grid shelf - Heavy-duty castors steerable Worn welding accessories not included Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Dimensions L x W x H 2.4 x 1.2 x 0.95 m Condition: never used / new (5) Auction-ID: A7-46642-131

Set 3: 77-piece, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic Bolt 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Number 77 Lots Weight 146 kg Condition new Hole diameter 28 mm Auction-ID: A7-46642-204

Welding table / straightening table - Panel thickness 80mm - Panel thickness incl. frame 360mm Table length 4900 mm Table width 1300 mm Table height 980 mm Machine weight approx. 5.6 t Dimensions L x W x H 5.0 x 1.3 x 0.6 m Auction-ID: A7-46642-34

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories are not included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Accessories on the table and pallet truck are not included Condition: never used / new (5) Auction-ID: A7-46642-43

Basic Set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 quick-clamping bolts 2 pcs universal stop 100mm 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 300mm 2 pcs stop and clamping angle 75mm 4 pcs stop and clamping angle 175mm 4 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 Burner Holder 1 pc. eccentric stop 100mm diameter 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, natural, organic based 2 pcs Welding Table Cleaner 500ml, natural, bio-based Condition: never used / new (5) Auction-ID: A7-46642-209

Special set 80 pieces, 28mm system Material: Burnished quality steel Scope of delivery see pictures Number of 80 Lots Weight 150 kg Condition new Hole diameter 28 mm Dimensions L x W x H 0.8 x 0.6 x 0.5 m Auction-ID: A7-46642-177

Welding table with accessories: - Table size: 2400x1200x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges and holes chamfered 45° - Height of sidewall 200 mm - Holes sidewall in diagonal grid - Construction reinforced by ribs Accessories: - 6x 280610.N Screw clamp - 12x 280511 quick-release bolts - 8x 280420.N Universal Stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set Table length 2400 mm Table width 1200 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 0.99 t Auction-ID: A7-46642-14

Basic Set 3: 69 pieces, 28mm system, consisting of: Ferrules: 10 x 280604 Bolts: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 4 x 284050 Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-46642-180

Special set 102 pieces, 28mm system incl. tool trolley Material: Burnished quality steel Scope of delivery see pictures Number of 102 Lots Weight 320 kg Condition new Hole diameter 28 mm Dimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-46642-197