サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 108)
エムハートタッカーETF50R.00.70 / 5.12-30F7スタッド溶接機 技術的な詳細: メーカー:Emhart Teknologies(TUCKER GmbH) モデル/タイプ:ETT50R.00.70 / 5.12-30F7 商品番号: T045 001/400 電圧: 400 V、50/60 Hz メーカー: ドイツ製 状態:中古(写真参照)。 ヒント： 詳細な技術データと処理手順については、元のデー シートを参照するか、製造元に直接問い合わせる とを強くお勧めします。 新品・中古品をもっと当店でご紹介します! 国際送料はご要望に応じて!
エムハートタッカーETF50R.00.54 / 12.5.13-25BMスタッド溶接機 技術的な詳細: メーカー:Emhart Teknologies(TUCKER GmbH) モデル/タイプ:ETF50R.00.54 / 12.5.13-25BM 商品番号:T045 006/400 電圧: 400 V、50/60 Hz メーカー: ドイツ製 状態:中古(写真参照)。 ヒント： 詳細な技術データと処理手順については、元のデー シートを参照するか、製造元に直接問い合わせる とを強くお勧めします。 新品・中古品をもっと当店でご紹介します! 国際送料はご要望に応じて!
Key data: 4 Meter, 13 t
マシンタイプ:プラズマインバーター切断機 Hypertherm を作る タイプ Powermax 30 AIR シリアル番号039.660 接続電圧 1 x 230ボルト 調整範囲 15 - 30 アンペア デューティサイクル20%ED(30アンペア) 電流調整は無段階に可変 125 mm/minで短時間15 mmの最大カットオフカット 500 mm/minで短時間7 mmの最大品質切断 内蔵ファンによる冷却インバーター 冷却バーナー圧縮空気冷却 ポータブル組立システム設計 ヒューズ 16アンペア オプションの付属品一体型コンプレッサー 寸法 長さ x 幅 x 高さ 420 x 195 x 330 mm バーナー付き重量 13 kg 年齢 3歳 コンディションワークショップテスト済み、UVVテス レポートを含む非常に良好な状態 納品範囲以下の付属品を備 ...
Key data: 4 Meter, 13 t
マシンタイプ:プラズマインバーター切断機 Hypertherm を作る タイプ Powermax 30 AIR シリアル番号033.100 接続電圧 1 x 230ボルト 調整範囲 15 - 30 アンペア デューティサイクル20%ED(30アンペア) 電流調整は無段階に可変 125 mm/minで短時間15 mmの最大カットオフカット 500 mm/minで短時間7 mmの最大品質切断 内蔵ファンによる冷却インバーター 冷却バーナー圧縮空気冷却 ポータブル組立システム設計 ヒューズ 16アンペア オプションの付属品一体型コンプレッサー 寸法 長さ x 幅 x 高さ 420 x 195 x 330 mm バーナー付き重量 13 kg 年齢 4歳 コンディションワークショップテスト済み、UVVテス レポートを含む非常に良好な状態 納品範囲以下の付属品を備 ...
機械タイプ:MIG / MAG溶接機 メルクルを作る タイプ RedMIG eco 2800 K EUエコデザインに準拠 規則番号 2019/1784 接続電圧 3 x 400ボルト 調整範囲 30 - 280 アンペア デューティサイクル:280アンペアで30%EDです 210アンペアで60%EDを 180アンペアで100%EDを 電流設定14段階のスイッチングレベル 内蔵ファンによる冷却変圧器 冷却バーナー ガス冷却 モバイルコンパクトシステムの設計 ワイヤーフィーダー4ローラードライブ DV 26 ヒューズ 16アンペア 寸法 長さ x 幅 x 高さ 800 x 460 x 655 mm 重さ 97 kg 生後12ヶ月 ワークショップでテスト済みの状態、非常に良好、U VVテストレポートを含む 次のアクセサリを備えた溶接システムの供給範囲: 溶接ト ...
10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, ef ...
3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...
A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...
5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal ov ...
consisting of: - Laser welding head in aluminum case - Coaxial extension - Gas pressure reducer for welding gas supply - Operating instructions - Aluminum carrying case 5300_2 - WSweld Starter Kit Starter Kit WSweld Consisting of: 3 x Annular gap nozzle 1 x Focusing mirror 1 x Deflecting mirror 1 x ZnSe window Laser welding head TC08 Replacing the cutting head with the WSweld laser welding head TC08 expands a flatbed machine into a laser welding system. Deep penetration and heat conduction welding combined in one optic Active cooling of all optical elements Coaxial welding gas supply for perfect laser weld seams Cross-jet prevents contamination of the optics Active collision detection The WSweld laser welding head TC08 is compatible with the following machine types: TRUMPF TruLaser 3030 classic TRUMPF TruLaser 5030 classic TRUMPF Trumatic L2530 TRUMPF Trumatic L3030 TRUMPF Trumatic L3040 ...
中古溶接装置 写真に見られるように、技術データ 写真を参照してください。 さらにご不明な点がございましたら、 価格は個当たりの価格です
仕様： 手順:2段階 フィルター面積:約17m² 分離効率:>99% 溶接ヒューム分離クラス:W3 抽出能力:1100 m³/h 抽出アームの直径:150 mm 抽出アームの長さ:3 m 電源接続:3 x 400 V モーター出力:1.1 kW 音圧レベル:70 dB(A) 寸法、約:785 x 730 x 950 mm 重量、約:106kg 特性： - ドイツ製 - 少量から中程度の煙/粉塵量用 - たまに使用するから頻繁に使用するのに適していま - メンテナンスドアによる便利なフィルター交換 - 抽出フードは360度回転および回転可能 備品： - 3つの新しい交換用メインフィルター(元の価格は各 330ユーロ) - 7つの新しい交換用プレフィルター - 抽出フード2個(うち1つは未使用)
移動経路 X/Y/Z: 3000mm/1500mm/115mm、レーザー出力: 5000W、切断能力軟鋼/ステンレス鋼/アルミニウム: 25mm/20mm/12mm、移動速度: 200m/min、切断精度: 0.1mm。機械寸法 X/Y/Z: 11000mm/4600mm/2400mm、重量: 12000kg、制御: シーメンス シヌメリック 840D。コンベア、さまざまなレンズサイズのレーザー 切断ヘッド、Liftmaster R、およびその他の周辺機器が含まれます。ドキュメ ントが利用可能です。現地検品が可能です
周辺機器を含む完全なプラズマ切断システムエリコ が利用可能です。1)CNCプラズマ切断システムOxytome 30、製造年:2008年。2)プラズマ源エアリキードNertajet HP125、製造年:2008年。3)フィルターユニット ドナルドソン トリット DCE DFPRO 8-Cyclo、製造年:2008年、重量:約1625kg。4)冷却ユニットA ir Liquide Friojet-30、製造年:2008年、冷却能力:2kW、最大動作圧力 :29.5bar、冷媒:R407c、重量:80kg。ドキュメントが利用可 能です。現地検品が可能です
table diameter: 340 mmtable load: 160 horizontal kg.table load: 100 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,6 - 6,0 U/minbore: 60,0 mmmotor: 230 Voltweight of the machine ca.: 56 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time- The turntable has a 60 mm hollow shaft- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- COM 1800 control with lap welding- Operating instructions in GermanFu ...
total power requirement: 230 Volttable diameter: 300 mmtable load: 100 Horizontal kgswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/minturning speeds: 1,2 - 12,0 U/minbore: 20,0 mmweight of the machine ca.: 50 kgdimensions of the machine ca.: 480 x 325 x 470 mmFurnishing:- Precise drive unit with face plate, on a stable floor stand.- clockwise / counterclockwise- 2 speed series, stepless- Swivel range from 0 ° - 90 °. Manual tilt- DC gear motor with worm gear, infinitely variable.- diameter of 300 mm. Chrome-plated surface to protect against weld spatter.- The devices control panel is easy to understand and use.- Start / stop via a location-independent foot switch.- The speed and direction of rotation are set on the machine.- HF protected.Scope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range for steel to: 12.0 TS mmcutting range for steel to: 8.0 QS mmcapacity at 100%: 30.0 Amperecutting medium: Druckluft output: von 20 - 40 Ampereoutput: Eingang 4.9 KWvoltage: 230 Vweight: 17,9 kgrange L-W-H: 480 x 210 x 340 mmThe Avalon 40.1 is a light, handy plasma cutting system with highCutting performance and top cutting quality. Their light weight and simplicityHandling makes them the ideal candidate for crafts, workshops andIndustry. Cuts carbon steel, stainless steel, aluminum, copper...Characteristics- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch to activate airflow to test air pressure. without having to trigger the burner.- Powerful compact system- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the. pilot arcmax. separation ...
cutting range for steel to: 15.0 TS mmcutting range for steel to: 10.0 QS mmcapacity at 100%: 25.0 Amperecutting medium: Druckluft output: von 20 - 40 Amperevoltage: 230 VAir consumption: 230 l/min.output: Eingang 4.9 KWweight: 8.0 kgrange L-W-H: 505 x 147 x 305 mmThe Avalon 40.1 is a light, handy plasma cutting system with highCutting performance and top cutting quality. Their light weight and simplicityHandling makes them the ideal candidate for crafts, workshops andIndustry. Cuts carbon steel, stainless steel, aluminum, copper...Characteristics- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch to activate airflow to test air pressure. without having to trigger the burner.- Powerful compact system- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the ...
table length: 3000 mmtable width: 1500 mmtable height: 850 mmside-clamping surface:: 200 (Höhe) mmweight: 1517 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Distance between holes in side wall 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Plasma nitrided version with scale- incl. 6x base equipment The data for this ad was created with ModulMWS - th ...
table length: 1500 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 255 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 1500 x 1000 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagon ...
table length: 3000 mmtable width: 1500 mmtable height (lateral area): 200 mmweight: 1374 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Surface holes in a diagonal grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Extreme plasma nitrided version with scale- with diagonal ...
table length: 2000 mmtable width: 1000 mmtable height (lateral area): 200 mmweight: 699 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Surface holes in a diagonal grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 28 hole pattern / dimensions 2000 x 1000 x 200 mm- Extreme plasma nitrided version with scale- with diagonal gr ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 499 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structures.The welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagon ...
table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 351 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagona ...
table length: 3000 mmtable width: 1500 mmtable height (lateral area): 100 mmweight: 753 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 3000 x 1500 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagona ...
weight max. in kg: 1250 kgturning speeds: 2,0 U/minheight: max. 1.120 mmTorque: Tisch 490 Nmweight: 685 kgThe Siegmund Roto-Positioner is ideal for welding,Assembly and maintenance work. The positioning takes place via a hydraulic oneTurn and tilt function. The Siegmund Roto-Positioner is also includedequipped with a continuously height-adjustable axis.Furnishing:- Hydraulic rotation of the clamping plate- Tilt range up to 95 °- Hydraulic height adjustment and tilt function- including hand controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3000 kgturning speeds: 1,7 U/minheight: max. 1.620 mmTorque: Tisch 11.750 Nmweight: 1.305 kgThe Siegmund Roto-Positioner is ideal for welding,Assembly and maintenance work. The positioning takes place via a hydraulic oneTurn and tilt function. The Siegmund Roto-Positioner is also includedequipped with a continuously height-adjustable axis.Furnishing:- Hydraulic rotation of the clamping plate- Tilt range up to 95 °- Hydraulic height adjustment and tilt function- including hand controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 466 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Plasma nitrided 750 version with scale- incl. 6x base equipment The data for this ad was created with ModulMWS - the software solution of Log ...
table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 354 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Plasma nitrided 750 version with scale- Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution o ...
table length: 3000 mmtable width: 1500 mmtable height: 850 mmside-clamping surface:: 200 (Höhe) mmweight: 1518 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Distance between holes in side wall 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including 28 tool set 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Plasma nitrided version with scale- incl. 6x base equipment- incl. 28 tool ...
