Fabricant:
(Catégorie: 104)
Belt width: 65 mmincl. whetstone, diameter: 110 mm
Belt sander with - Contact disc: 200 x 75 mm - Continuous surface grinding table: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5)
Belt width 100 mm Strap length 915 mm Grinding wheel dimension 200 mm Work table: 170x125 / 265x15 mm Total power requirement 0.5 kW Machine weight approx. 26 kg Space requirement approx. 0.6 x 0.5 x 0.3 m Condition: never used / new (5)
Stone and belt grinding machine Motor power 900 watts. Speed 2950 rpm. Dimensions whetstone 200 x 32 x 30mm. Dimensions sanding belt 100 x 915 mm. Package sizes 62 x 54 x 30 cm. Weight 35 kg. Condition: never used / new (5)
Serial number: 1647Nominal speed: 2830 rpmwith two grinding wheels installedMax. grinding wheel diameter: approx. 180 mm
Manufacturing number: 75-8771Max. grinding wheel diameter: approx. 250 mmMax. sanding belt width: approx. 40 mm
Belt sander with - Contact disc: 600 x 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 30 m/sec Total power requirement 3 kW Machine weight approx. 70 t Space requirements approx. 1.2 x 0.5 x 0.75 m Condition: never used / new (5)
Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5)
Finishing machine single-sided machining or double-sided machining, second-hand3 FLAKKO units with 4 disc tools each:Drive power 7.5kWSpindle speed 300 - 2500 rpmFeed speed 2-20 m/minWet machiningTool diameter 230mmWorking width 400mm for single-sided machiningWorking width 200mm for double-sided machining with turning deviceSpecial magnetic insertsdesigned for hot machiningIPC control with PLCConnected load 3x 400V 50HzConnected load approx. 52 kWOverhaul of all units with conversion to new 4-point bearing between 2021 and 2023.Special-price 25.000 EURO, net -free loaded truck- Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
electrically drivendrum volume: approx. 580 x 520 x 520 mm (estimated volume) drum with 8 sidesdistance from parallel sides to each other: approx. 560 mm
Double bench grinder with table disc diameter 225mm. Speed approx. 2800rpm
Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg
Machine number: 043.082Max. sanding belt width: 150 mm
Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5)
Pipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Tube clamping range 90mm Documentation (English) Belt width 100 mm Belt length 2000 mm Tube diameter 16.5 - 76 mm Angle adjustable from - to 0 - 65 degrees Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.17 t Space requirement approx. 1.3 x 0.7 x 1.1 m Condition: never used / new (5)
Operating voltage: 220/380 VConnection: 0.9 kWRated current: 3.6/2.1 ASpeed: 2900 rpmGrinding wheel dimensions: 200/230/51 mm
Belt sander Moror Speed 2850rpm Moror power 3.0KW see pictures Condition: unchecked (6)
Knife sharpener with variable speed Grinding wheel 250 x 50 x 12mm, Gritt 220 Leather disc 200 x 30 x 12mm Grinding wheel diameter 250 mm Connection voltage 230 V Speed range infinitely variable 90 - 180 rpm Machine weight approx. 18 kg Dimensions L x W x H 470 x 300 x 440 m Condition: never used / new (5)
Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5)
Knife sharpener with Grinding wheel 250 x 50 x 12mm, Gritt 220 Leather disc 200 x 30 x 12mm Grinding wheel diameter 250 mm Connection voltage 230 V Speed Sharpening Stone 90 rpm Machine weight approx. 18 kg Dimensions L x W x H 470 x 300 x 440 m Condition: never used / new (5)
incl. high-frequency sander from the manufacturer COOPER, type: BL-2B, year of manufacture: 2006
Une meule horizontale CNC Höfler est disponible. Diamètre d’usinage : 650 mm, diamètre minimum de la pièce : 30 mm, largeur maximale de l’engrenage : 530 mm, plage de modules : 1,5-18, angle d’hélice maximal : 40, diamètre de la table : 490 mm, charge maximale de la table : 1000 kg. Dimensions de la machine X/Y/Z : environ 4500 mm/3000 mm/3000 mm, poids : environ 22 000 kg. Y compris l’unité de refroidissement Rittal et le système d’extraction ISI. La machine est hors service depuis 2010. Documentation disponible. Une inspection sur site est possible.
Une meulette de profil et de surface, RBW, est disponible. Classe de qualité de meulage : 6, diamètre de table rotative : 800 mm, diamètre de meulage : 800 mm, hauteur maximale de la pièce : 300 mm, poids maximal de la pièce : 1000 kg. Documentation disponible. Une inspection sur site est possible.
This 3-axis Combitec CT-450 CNC Internal Cylindrical Grinding Machine was manufactured in 2002. It features a robust design with an included extraction system and fire extinguishing system. With approximately 74,500 operating hours, this machine shows age-related signs of wear on the guideways. If you are looking to get high-quality cylindrical grinding capabilities, consider the Combitec CT-450 machine we have for sale. Contact us for further details.
Une meuleuse cylindrique interne Voumard entièrement révisée en 2020 est disponible. Plage de diamètre de meulage : 5 mm-200 mm, profondeur de meulage : 250 mm, vitesse : 1000 tr/min, contrôle de vitesse : variable continue. Une inspection sur site est possible.
À venir en vente : TOS Hol Monta UB85/6000 CNC, 2014 Sous puissance, moins utilisée et en très bon état
Cette meuleuse de surface JUNG J 630 E à 3 axes a été fabriquée en 1999. Il présente une course de 660 mm sur l’axe X, 360 mm sur l’axe Y et 280 mm sur l’axe Z. Avec un poids robuste de 3000 kg, cette machine est conçue pour des applications de rectification de précision. Si vous souhaitez obtenir des capacités de meulage de haute qualité, considérez la machine JUNG J 630 E que nous proposons à vendre. Contactez-nous pour plus de détails.
40 € 
