Fabricant:
(Catégorie: 106)
pressure:400 tthroat:520 mmstroke:20 - 200 mmno. of strokes:30 /mindistance table/ram, max. stroke up, adjustment up:680 mmtable surface area:1600 x 1000 mmtable height over floor:715 mmpassage to the back:1000 mmram surface:1300 x 800 mmram adjustment:130 mmpower requirement:38,0 kWweight:41,0 tdimensions (WxDxH):2,1 x 2,6 x 4,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic
pressure:25 tthroat:400 mmstroke:1000 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:620 x 620 mmHole in the table:80 mmtable height over floor:650 mmram surface:110 mmspeed down:300 mm/sspeed up:500 mm/sworking speed:14 - 85 mm/soil volume:400 lpower requirement:6,0 kWweight:3,8 tdimensions (WxDxH):1,5 x 2,1 x 3,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
: neu : ca. 4 Monate ab Auftragse : Italien : 74800 €: 1413.72 €: 100 to: 500 mm: 1000x800 mm: 600 mm: 26 mm/s: 5 mm/s: 4 kW: 1260 mm: 1060 mm: 2400 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:40 tdistance between columns:500 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:480 x 400 mmhole in the table:50 mmtable height over floor:950 mmside window:150 mmram surface:150 mmspeed down:480 mm/sspeed up:480 mm/sworking speed:20 mm/soil volume:160 lpower requirement:7,5 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary
pressure:400 tstroke:280 mmno. of strokes:56 Hub/mindistance table/ram, max. stroke up, adjustment up:680 mmtable surface area:560 x 750 mmallowed max. force:600 tblow die to die:800 tspindle diameter:200 mmram surface:560 x 560 mmheight over floor:4,1 mpower requirement:37,0 kWweight:12,0 tdimensions (WxDxH):2,2 x 2,0 x 4,25 m
pressure:150 tthroat:520 mmstroke:30 - 200 mmno. of strokes:15 - 60 /mindistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1600 x 1000 mmhole in the table:1040 x 140 mmtable height over floor:1000 mmpassage to the back:1000 mmram surface:1400 x 800 mmram adjustment:120 mmpower requirement:20,0 kWweight:27,5 tdimensions (WxDxH):2,3 x 2,75 x 4,5 mclutch-/ brake combination:pneumatic; Ortlinghaus overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:semi-automatic Option: NEW electrical controls:Siemens S7-1500 F
: neu : 2024 : 8319 : prompt, Zwischenverkauf v : Türkei : 77982 €: 1326.78 €: 1 : 70200 €: 200 to: 3050 mm: Y1 / Y2 / X und R Achse : 210 mm: 2550 mm: 250 mm: 445 mm: hydraulisch : 100 mm/s: 7 mm/s: 73 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 858 mm: 104 mm: 150 l: 15 kW: 3750 mm: 1390 mm: 2500 mm: 8160 kg4 axes (Y1, Y2, X and R axis)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC CONTROLLED CROWNING TABLEintermediate clamps for ...
pressure:25 tthroat:355 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:500 x 500 mmhole in the table:180 mmtable height over floor:700 mmram surface:250 x 250 mmpower requirement:7,5 kWweight:2,1 tdimensions (WxDxH):1,45 x 0,9 x 2,55 m
pressure:125 tthroat:340 mmstroke:20 - 160 mmno. of strokes:55 /mindistance table/ram, max. stroke up, adjustment up:480 mmtable surface area:1000 x 660 mmtable height over floor:730 mmram surface:600 x 300 mmram adjustment:75 mmpower requirement:8,5 kWweight:7,8 tdimensions (WxDxH):1,4 x 2,8 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
pressure:160 tthroat:500 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1140 x 980 mmhole in the table:180 mmtable height over floor:860 mmram surface:1000 x 800 mmoil volume:1000 lpower requirement:50,0 kWweight:18,0 tdimensions (WxDxH):1,3 x 2,6 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical cutting impact cushioning:hydraulic
pressure:2 tdayligth:80 mmCenter of spindle to wall or column:100 mmweight of the machine ca.:0,5 tdimensions of the machine ca.:0,8 x 0,6 x 2,0 mHand operated fly press, with center turning device appr. 100 x 400 mm length- Handwheel diameter 600 mm
pressure:200 tdistance between columns:1100 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:63 tstroke of drawing cushion in table:250 mmdie cushion area:800 x 750 mmtable height over floor:800 mmram surface:1000 x 1000 mmSpeed down:400 mm/sspeed up:250 mm/sworking speed:22 - 56 mm/spower requirement:45,0 kWweight:24,0 tdimensions (WxDxH):2,4 x 1,5 x 5,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
pressure:6,3 tthroat:210 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:380 x 350 mmhole in the table:100 mmtable height over floor:1050 mmram surface:45 mmpower requirement:4,0 kWweight:0,8 tdimensions (WxDxH):0,8 x 1,2 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:035 tthroat:240 mmstroke:4 - 70 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:580 x 440 mmhole in the table:200 x 170 mmtable height over floor:670 - 820 mmtable adjustable:150 mmram surface:300 x 175 mmram adjustment:50 mmpower requirement:3,0 kWweight:2,3 tdimensions (WxDxH):1,2 x 1,4 x 2,1 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
pressure:080 tthroat:300 mmstroke:7 - 100 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:720 x 600 mmhole in the table:300 x 120 mmtable height over floor:850 mmram surface:400 x 275 mmram adjustment:60 mmpower requirement:5,5 kWweight:6,5 tdimensions (WxDxH):1,2 x 2,0 x 2,9 mGerman Safety: permitted for manual loading:CE-sign light guard:Sick clutch:hydraulic overload protection in ram:hydraulic ram adjustment:motoric stroke adjustment:automatic
pressure:160 tthroat:690 mmstroke:8 - 180 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1000 mmhole in the table:400 / 120 mmtable height over floor:850 mmpassage to the back:900 mmram surface:1000 x 700 mmram adjustment:130 mmpower requirement:11,0 kWweight:19,0 tdimensions (WxDxH):2,4 x 2,8 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic
: neu : ca. 4 Monate ab Auftragse : Italien : 160000 €: 3024 €: 300 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 3550 mm: 4000 mm: 2600 mm: 15000 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.800 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:63 tthroat:325 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:700 mmtable surface area:640 x 640 mmpressure of drawing cushion in table:25 tstroke of drawing cushion in table:200 mmdie cushion area:450 x 450 mmtable height over floor:800 mmram surface:560 x 560 mmoil volume:450 lpower requirement:15,0 kWweight:7,0 tdimensions (WxDxH):1,2 x 2,0 x 3,1 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
PW Compacteur de déchets 10 tonnes – nouvel appareil Compacteur hydraulique des déchets pour une compactation efficace du carton, des films, du plastique et des films d’ensilage. Idéal pour l’agriculture, le commerce, les entrepôts et les ateliers afin de réduire le volume des déchets et les coûts d’élimination. Conception compacte, utilisation facile et fiable. Données techniques Force de pression : 10 tonnes Taille de la machine (LxLxH) : 1 450 x 650 x 2 650 mm Ouverture de remplissage (LxLxH) : 800 x 400 x 1 250 mm Taille de la balle (LxLxH) : max. 800 x 400 x 800 mm Poids : 350 kg Puissance de transmission : 4,5 kW Nouvel appareil, emballage d’origine sans huile de remplissage et sans tests fonctionnels. Auction-ID: A1-45930-12
pressure:100 tthroat:320 mmstroke:160 mmdistance table/ram, max. stroke up, adjustment up:480 mmtable surface area:630 x 550 mmhole in the table:200 mmtable height over floor:860 mmram surface:560 x 450 mmoil volume:500 lpower requirement:30,5 kWweight:6,4 tdimensions (WxDxH):1,6 x 2,0 x 2,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:hydraulic depth stop:mechanical
pressure:160 tthroat:480 mmstroke fix:fix 180 mmno. of strokes:25 - 70 /mindistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1100 x 900 mmHole in the table:450 mmtable height over floor:900 mmpassage to the back:700 mmram surface:900 x 600 mmram adjustment:144 mmpower requirement:30,75 kWweight:15,3 tdimensions (WxDxH):2,0 x 2,4 x 3,75 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Desch overload protection in ram:hydraulic ram counterbalance:pneumatic
: neu : ca. 10 Wochen ab Auftrags : Türkei : 88113 €: 1665.34 €: 220 to: 3050 mm: Y1 / Y2 / X Achse : 265 mm: 2600 mm: 450 mm: 530 mm: hydraulisch : 140 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 22 kW: 4250 mm: 1770 mm: 3000 mm: 12600 kgStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning ta ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7300 €: 140.89 €: 60 to: horizontal verschiebbar : 250 mm: 1040 mm: 180x120 mm: 4 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 800 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:100 tthroat:300 mmstroke:20 - 120 mmno. of strokes:55 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:800 x 560 mmhole in the table:310 x 180 mmtable height over floor:745 mmram surface:520 x 245 mmram adjustment:75 mmpower requirement:5,5 kWweight:5,5 tdimensions (WxDxH):1,1 x 2,4 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
pressure:40 tthroat:350 mmmaterial thickness: - 12 mmstamping power-diameter at 12 mm material thickness:24 mmstamping power-diameter at 6 mm material thickness:50 mmpower requirement:2,2 kWweight:1,5 tdimensions (WxDxH):0,8 x 1,5 x 1,9 m
: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: fix : 1500 mm: 300 mm: 1520 mm: 680 mm: 10 mm/s: 5 mm/s: 6 mm: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2275 mm: 2500 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand operating panelTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:315 tthroat:480 mmstroke:20 - 190 mmno. of strokes:36 + 45 /mindistance table/ram, max. stroke up, adjustment up:615 mmtable surface area:1400 x 880 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:950 mmram surface:850 x 630 mmram adjustment:125 mmpower requirement:33,0 kWweight:30,0 tdimensions (WxDxH):2,0 x 3,0 x 4,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic overload protection in ram:hydraulic stroke adjustment:semi-automatic ram adjustment:motoric ram counterbalance:pneumatic
pressure:200 tstroke:30 - 160 mmno. of strokes:40 - 120 /mindistance between columns:1500 mmdistance between oil collecting pans:1300 mmdistance table/ram, max. stroke up, adjustment up:860 mmhole in the table:550 x 300 mmtable surface area:1250 x 1250 mmtable height over floor:1000 mmcolumn travel -side:600 x 530 mmram surface:1250 x 1000 mmram adjustment:125 mmMaterial width of feeder:30 - 500 mmMaterial thickness feeder:0,5 - 3,0 mmfeeding length:0 - 999,9 mmpower requirement:50,0 kWweight:34,0 tdimensions (WxDxH):4,0 x 1,7 x 5,2 mclutch-/ brake combination:pneumatisch, Ortlinghaus overload protection in ram:hydraulisch ram adjustment:automatisch stroke adjustment:automatisch ram counterbalance:pneumatisch roll feed:Weingarten, WE 60 Option: NEW electrical controls:Siemens S7-1500 F
pressure:40 tdistance between columns:620 mmstroke:975 mmdistance table/ram, max. stroke up, adjustment up:940 mmtable surface area:590 x 1000 mmtable height over floor:770 mmram surface:590 x 1000 mmside window:470 mmmax. tool weight:2,5 tmax. capacity of swivelling ram plate:1,5 tSpeed down:0 - 50 mm/sSpeed up:0 - 34 mm/sWorking speed:0 - 10 mm/soil volume:150 lpower requirement:9,5 kWweight:3,2 tdimensions (WxDxH):2,0 x 2,4 x 3,0 m
pressure:500 tdistance between columns:1220 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1600 x 1200 mmpressure of drawing cushion in table:320 tstroke of drawing cushion in table:150 mmdrawing cushion surface in table:750 x 625 mmpressure of drawing cushion in ram:180 tstroke of drawing cushion in ram:100 mmdrawing cushion area in ram:750 x 625 mmram surface:1600 x 1200 mmtable height over floor:800 mmspeed down:665 mm/sspeed up:530 mm/sworking speed:34 - 100 mm/squantity of oil:2000 lpower requirement:180,0 kWweight:40,0 tDimensions (WxDxH):3,2 x 2,4 x 7,5 mDepth of foundation pit:4,1 mHeight above floor:5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
1.000 € 
