sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 108)
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 466 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Plasma nitrided 750 version with scale- incl. 6x base equipment The data for this ad was created with ModulMWS - the software solution of Log ...
table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 354 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Plasma nitrided 750 version with scale- Including 4x basic equipment The data for this ad was created with ModulMWS - the software solution o ...
table length: 3000 mmtable width: 1500 mmtable height: 850 mmside-clamping surface:: 200 (Höhe) mmweight: 1518 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Distance between holes in side wall 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including 28 tool set 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Plasma nitrided version with scale- incl. 6x base equipment- incl. 28 tool ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 1069 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard.Special set - including 28 tool set 3Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Surface holes in a diagonal grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresPlasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimension ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 537 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Plasma nitrided version with scale- including 6x base equipment- incl. 16 tool set 3:+ 8x 160610.N c ...
table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 354 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Plasma nitrided version with scale- Including 4x basic equipment- incl. 16 tool set 3:+ 8x 160610.N ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- Extreme plasma ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 949 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilling surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines allow for precise buildsThe welding tables are provided with a scale as standard.Plasma nitrided version :- Protection from rust/scratches/weld spatter adhesion- more corrosion resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- pl ...
weight max. in kg: max. 1000 kgturning speeds: 0,18 - 0,58 U/minheight: 976 - 1436 mminclination: 0 - 115 °table diameter: 895 mmvoltage: 380 Vtotal power requirement: 2,0 kWweight: 685 kgrange L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on requestThe AK BEND SRH hydraulic welding positioner is idealfor welding, assembly and maintenance work. Positioning is done via ahydraulic rotation and tilting function.Description:- electro-hydraulic turning and tilting function- Fast handling of workpieces- Maximum productivity thanks to optimal working position- Lifting, tilting and turning workpieces in one clamping- Low idle times thanks to turning components- Maximum work performance thanks to comfortable working- Back-friendly working for the userEquipment:- Continuously variable speed adjustment- Freely movable foot ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- High-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Bore diameter 28 mm- Surface holes with a 100x100 mm grid- Rounded corners, edges, and holes- Side panel height 200 mm- Side panel hole spacing 50 mm- Surface scale included- Construction reinforced with ribs- Grid lines enable precise setupsThe welding tables are equipped with a scale as standard.Plasma nitrided finish:- Protection against rust, scratches, and weld spatter adhesion- More corrosion-resistant / higher load capacityFeatures:- 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm- Plasma nitrided finish (750) with scale- Includes 4x base feetThe data for this ad was created with ModulMW ...
table length: 3000 mmtable width: 1500 mmtable height (lateral area): 100 mmweight: 726 kgThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 3000 x 1500 x 100 mm- Plasma nitrided version Professional 750 with scale- Including 8x basic equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: 1600 m3/hfeed volume: 99,9 %length: 3.000 Absaugschlauch mmmotor: 230 Voltmotor: 1,1 KWweight: 80,0 kgrange L-W-H: 580 x 580 x 900 mmDescription:The filtoo filter device newly developed by TEKA isa mobile filter system that manyTasks in the field of filtration ofSmoking, dusts and gases can be used.Also suitable for high-alloy steels (stainless steel).(the device was based on DIN EN ISO 15012-1 (2005)tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140)for welding smoke class W3 (degree of separation:> 99.9%))Where can the SIG 230 filtoo be used?- at welding workplaces- in the workshop area- for soldering applications- with restorers- in locksmithsFurnishing:- BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals- Operating instructions in Germanoptional equipment for a surcharge (recommended)- Retrofi ...
table diameter: 500 mmtable load: 300 horizontal kg.table load: 150 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,5 U/minbore: 90,0 mmtable height: ~ 650 mm mmmotor: 230 Voltweight of the machine ca.: 90,0 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be tilted and clamped at an angle of 0 ° to 90 °- manual tilting- Start / stop via location-independent foot switch- Direction of rotation can be selected right / left- Adjustable rotation time- The control of the welding machine via control- 350 amp ground connectionScope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 340 mmtable load: 290 horizontal kgtable load capacity: 190 vertikal kgturning speeds: 0,6 - 6,0 U/minspindle bore: 60,0 mmswivelling range: 0 - 90 Gradweight of the machine ca.: 62 kgdimensions of the machine ca.: 380 x 340 x 425 mmFurnishing:- The table can be tilted and clamped at an angle of 0 to 90- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time.- The turntable has a 60 mm hollow shaft.- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- Operating instructions in GermanFunctions of the COM 1000 con ...
cutting range for steel to: 35.0 TS mmcutting range for steel to: 25.0 QS mmampere: 20 - 65 Amperecutting medium: Druckluft voltage: 400 Voutput: Eingang 7.8 KWweight: 51.5 kgrange L-W-H: 595 x 250 x 890 mmAvalon 65 AIR with integrated compressorCutting - clean and reliableThe air plasma cutting system Avalon 65 AIR with integratedCompressor is your reliable partner for the demandingMission. Make separation cuts up to one with the Avalon 65 AirMaterial thickness of 18 mm.Characteristics :- IGBT technology- with integrated compressor- Microprocessor control system for excellent and dynamic. Arc properties- CNC interface- HF-free arc starting system for increased reliability. and low EMF exposure- Manual switch to activate airflow around test air pressure. without having to trigger the burner- Intelligent protection function protects the plasma torch. from damage such as incorrect air pres ...
table load: 1000 kgtable diameter: 900 mmturning speeds: 0,12 - 1,2 U/minswivelling range: 0 - 135 Gradspeed: Kipp 0,35 U/minwelding current: 500 Adimensions of the machine ca.: 1475 x 1050 x 900 mmFor heavy industryWhen choosing a turntable, it is essentialTurning and tilting torque must be taken into account. To noteapplies to how far the center of gravity of the workpiece is from theThe faceplate is away or how far the center of gravity isis eccentric from the center. By means of aRotary and tilting tables can be used to optimize workpiecesposition for welding.- Robust construction.- Infinitely variable.- Hand remote control.- HF protected.Furnishing :- 1 control (integrated)- 1 wired remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pistolet : PH-3N, tension : 400V, poids : 50kg. Livré avec manuel d’utilisation, 2x câbles de terre avec pince BMS/BMK, raccordement au gaz, support de goujon HZ, adaptateur et clé. Une inspection sur place est possible.
Agriculteur EL2100 Soudeur 230 et 400V Avec ventilateur de refroidissement et l’équipement de conduite
Cette offre s’adresse exclusivement aux entrepreneurs au sens de l’article 14 du Code civil allemand. Le prix s’entend net plus 19 % de TVA. Fabricant : ARO Type : M 302 Année de fabrication : 1971 N° 1063655 380 V ~ 50/60 Hz E 100 100 Toutes les informations sont faites au mieux de nos connaissances, sous réserve d’erreurs. La vente est soumise à l’exclusion de toute garantie. L’exclusion ne s’applique pas aux demandes de dommages et intérêts résultant d’une négligence grave ou d’une violation intentionnelle des obligations du vendeur ou d’une atteinte à la vie, à l’intégrité physique et à la santé. Autres mentions légales Vous trouverez des informations sur le site Internet de Witzenmann GmbH sous les mots-clés « Mentions légales », « Conditions générales » et « Protection des données ».
Cette offre s’adresse exclusivement aux entrepreneurs au sens de l’article 14 du Code civil allemand. Le prix s’entend net plus 19 % de TVA. Type de machine à souder : Machine à souder à joint de rouleau Fabricant : Nimak Type : NMP 7/100 Année de fabrication : 1971 N° de machine 71059 Puissance nominale : 100 kVA à 50 % ED Puissance raccordée : 175 kVA Tension primaire : 380V Tension en circuit ouvert : 7,3 V Sec. Str. dd/max. 8/33 kA Force de l’électrode : 750 kp Fréquence : 50 Hz jusqu’à 8,8 V à 6 ATU Toutes les informations sont faites au mieux de nos connaissances, sous réserve d’erreurs. La vente est soumise à l’exclusion de toute garantie. L’exclusion ne s’applique pas aux demandes de dommages et intérêts résultant d’une négligence grave ou d’une violation intentionnelle des obligations du vendeur ou d’une atte ...
Fabricant : Scheld GmbH Modèle : DT 300/65 Les plateaux tournants de soudage avec un arbre creux dans la plaque tournante équipé. Cela augmente les possibilités de positionnement flexible et Soudure cylindrique de votre composant. Pensez à la Soudage au gaz de formage. En utilisant des tables rotatives dans le soudage, la cadence de production peut être et la qualité des produits est encore améliorée. Tables de soudage . Caractéristiques: -Capacité - avec trou traversant - Axe de rotation et d’inclinaison - Vitesse variable en continu - Modèle compact - Avec pédale
Pistolet de soudage par points --- Puissance nominale à 50 %ED : 22kVA Courant de court-circuit : 17kA Force de l’électrode : 360daN / course unique Projection : 95 mm --- - Bras d’électrode AE/2/96g + C34/2/63g --- Contrôle du soudage : sur demande --- Équilibreur à ressort sur demande --- Garantie 6 mois --- Formation + mise en service sur demande --- Électrodes de soudage par points + pièces de rechange disponibles en stock
Key data: 25 kp, 150 , 120
Puissance nominale à 50 %ED : 25kVA Courant de court-circuit : 12kA Force de l’électrode : 120daN / course unique Projection : 150 mm --- Contrôle de soudage : AR.01 (5 fois, 2 programmes) --- Avec options supplémentaires : -Pédale de commande -Interrupteur principal - Monté sur plaque d’aluminium --- Garantie 6 mois --- Formation + mise en service sur demande --- Électrodes de soudage par points + pièces de rechange disponibles en stock
Key data: 40 kp, 550 , 390
Puissance nominale à 50 %ED : 40kVA Courant de court-circuit : 26,2 kA Force de l’électrode : 65-390daN / course unique Gorge : 250-550mm --- Contrôle de soudage : MPS 10 (5 fois, 8 programmes) --- Avec options supplémentaires : - Pédale avec toucher « hors tension » -Interrupteur principal --- Garantie 6 mois --- Formation + mise en service sur demande --- Électrodes de soudage par points + pièces de rechange disponibles en stock
Key data: 63 kp, 750 , 600
Puissance nominale à 50 %ED : 63kVA Courant de court-circuit : 26,3 kA Force de l’électrode : 65-390daN / course unique Gorge : 450-750 mm --- Contrôle de soudage : MPS 15036 (5 fois, 1 programme) --- Avec options supplémentaires : - Pédale avec toucher « hors tension » -Interrupteur principal --- Garantie 6 mois --- Formation + mise en service sur demande --- Électrodes de soudage par points + pièces de rechange disponibles en stock
Key data: 100 kp, 350 , 600
Puissance nominale à 50 %ED : 80kVA Courant de court-circuit : 35kA Force de l’électrode : 100-600daN / course unique Gorge : 350-650mm --- Contrôle de soudage : MPS 200 (8 fois, 4 programmes) --- Avec options supplémentaires : - Pédale avec toucher « hors tension » - Débitmètre électronique -Interrupteur principal - avec bras tubulaire --- Garantie 6 mois --- Formation + mise en service sur demande --- Électrodes de soudage par points + pièces de rechange disponibles en stock
Système de soudage par points par résistance contrôlé par robot avec pistolets de soudage par points, plateau tournant et boîtier interchangeables
capacité actuelle : max 114 kVAgorge : 550 mm capacité de pression de contact : . kpPoids de la machine env. : 290 kginkl. WasserkühlungLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Une machine de soudage par points à moyenne fréquence Dalex-Werke est disponible. Profondeur de la gorge : 350 mm, course de l’électrode : 90 mm, diamètre du porte-électrode : 30 mm, cône de l’électrode : MK2, puissance nominale à 20 % du facteur de service : 180 kVA, puissance de soudage max. : 200 kVA, tension primaire : 400 V, fréquence nominale : 1000 Hz, force de l’électrode : 20daN–600daN. Poids : env. 575 kg, commande : HWS 2102. Documentation disponible. Une inspection sur place est possible.
Une machine de précision laser CNC à 6 axes pour l’usinage laser sans contact et la mesure de géométries complexes, en particulier dans l’industrie de la fabrication d’outils et de moules, est disponible. Course X/Y/Z : 300mm/400mm/500mm, dimensions de la table X/Y : 300mm/400mm, axes mécaniques/optiques : 3/3, système de mesure : capteur SI sans contact, précision de mesure : +/-0,01mm, état de surface : Ra sous 1μm, heures de fonctionnement : 21045h, heures de traitement : 6549h. Le laser (Prisma) est défectueux. Documentation disponible. Une inspection sur place est possible.
