SIDEROS machine à vendre

Données techniques : application : Découpe au laser, plasma et oxy-carburant, broyage et soudage Matériaux : Tôles d’acier et d’acier inoxydable, sec et sans huile Cartouches / valves solénoïdes: 6 / 6 Flux de volume nominal: 3.600 m 3/h (avec charge de cartouche de 600 m3/h) Surface de filtre: 84 m2 (21 m2 par cartouche) zone de filtre: 84 m2 (21 m2 par cartouche) Conteneur de collecte de poussières diamètre d’entrée d’air : 300 mm de diamètre de prise d’air : 350 mm température/humidité de l’air : 'lt; 60 C / 'lt; 50% Concentration permise d’huile : 3 mg / m 3 Air comprimé : min. 6-7 barre au point d’alimentation, sec et sans huile Consommation d’air comprimé: Max 18 nm 3/h - 50 NLiter par pouls avec max 6 par minute degré de filtration: 99,99% émissions Dust: 'lt; 1 mg / m 3 Cabinet: 400 V, V, Unité de contrôle 3 phases, 50/60 Hz : 24 VAC, 50 H ...

Données techniques: Application: Découpe au laser, plasma et autogen, broyage et soudage matériaux: tôles en acier et en acier inoxydable, flux de volume sec et sans huile cartridges/ électriques: 6 / 6 Flux de volumenominal: 3.600 m3/h (à la charge de cartouche de 600 m3/h) Surface: 84 m2 (21 m2 par cartouche) Dustcollection de Air diamètre d’entrée: 300 mm Air diamètre de la sortie: 350 mm température/humidité de l’air: 'lt; 60 C / 'lt; 50 % Concentration d’huile detomé: 3 mg/m3 l’air comprimé: au moins 6-7 barre sur Point d’alimentation, consommation d’air sec et sans huile compressé : max. 18 Nm3/h - x 50 NLiter s par impulsion avec maximum. 6 par minute Niveau Defilter : 99,99 % Émission de poussière : 'lt; 1 mg/m3 'armoire de contrôle : 400 V, 3 phases, phases, phases, phases, phases, phases, phases 50/60 Hz Unité de contrôle: 24 VAC, 50 Hz Geraeusc ...

1 pièce Sideros système d’aspiration type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatique, de poussière de nettoyage de remplissage, Siemens Simatic contrôle système et filtre PTFE le système est conçu pour un flux volume de max. 5 500 m3/h et un pressage statique de max . Filtre de classe M avec un degré de séparation de 99,9% (BIA utiliser la catégorie U,S,G,C). Données techniques: ventilateur de flux de volume 9.000 m3/h Volume Filtre flux: 4.000 m3/h flux de filtre Volume: 4.000 m3/h Press: 2. 500 PA zone de remplissage de 60 m2 type filter: membrane PTFE separation degré: 99,9% cleaning: duesen rotatif connection puissance: 5,5 kW, 5,5 kW, 5,5 kW, 5,5 kW, 5,5 kW, 5,5 kW, 5,5 kW, 5,5 kW, 5,5 kW, 5,5 kW ...

; et la coupe comme nouveau, Démonstration

Pour le plasma CNC et les systèmes de coupe 1 stueck Sideros système d’aspiration type ECO 4 HC, maximum. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Coupe de tôles en acier et en acier inoxydable. système suction et filtre avec fan intégré, automatique, nettoyant de poussière filter, Siemens Simatic system control and PTFE membrane filter. Le système est conçu pour un flux volume de max. 5.000 m3/h et un maximum de 2.500 Pa. classe de remplissage M à un degré de séparation de 99,9% (catégorie d’utilisation de l’ABIA U,S,G,C). dimensions: Height: 2.100 mm depth: 1.413 mm Largeur: 1.413 mm Poids: 620 kg entrée Air: NW 200 - 250 mm Price 6.990.00 EUROS (prix - TVA ex works,  ...

; état de menthe, prêt

Max. load: 2.5t, connected load: 4kW, weight: 1.477t.

Sells SIDEROS Rotoclean brand deburring barrel Year of manufacture 2019 Very little used, almost new tank interior,

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm workpiece weight: 200 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 625 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg range L-W-H: 1 x 1,7 x 1,29 mm Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is i ...

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm container volume: 158 l workpiece weight: 175 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 624 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included ...

filling capacity: 800 kg max. workpiece height: 900 x 300 mm workpiece weight: total 500 kg container volume: 878 l max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1175 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workp ...

weight max. in kg: 2000 kg Working height minimal: 350 mm Working height maximum: 1800 mm max. torque: 3000 Nm 0: 1 U/min adjustment speed: vertikal 560 mm/min vertical adjustment: 1450 mm baseplate diameter: 600 mm rotation movement: 0,75 kW stroke drive: 1,85 kW height of the plant: 2505 mm weight: 1047 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical360° left/right rotation. A typical configuration is composed of a motorized headstock p ...

weight max. in kg: 1250 kg Working height minimal: 540 mm Working height maximum: 1120 mm table diameter: 800 mm swivelling range: --> 95 Grad max. torque: 490 Nm table rotation speed: 2 U/min Working height from to: 540 - 1120 vertikal mm Working height from to: 700 - 1280 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 757 kg dimensions of the machine ca.: 1,76 x 1,63 m Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 2 t swivelling range: --> 95 Grad max. torque: 1250 Nm table rotation speed: 2 U/min Working height from to: 550 - 1300 vertikal mm Working height from to: 650 - 1400 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 930 kg dimensions of the machine ca.: 1,85 x 1,66 m Electric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.