sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 108)
Table de gravureavec rainure 22 x 22 mmSurface de la table 1600 x 800 mmHauteur de la table 890 mmPoids 800 kgvoir photos Auction-ID: A7-44764-249
Table de soudage avec accessoires : - Taille de la table : 2400x1200x200 mm - acier de haute qualité S355J2+N + nitrure plasma - Épaisseur du matériau environ 24,5 – 27 mm - Alésage Ø 28 mm - Surface des trous 100x100 mm - Angles, bords et trous chanfreinés 45° - Hauteur du flanc 200 mm - Trous sur le flanc en grille diagonale - Construction renforcée par nervuresAccessoires : - 6x 280610.N serre-vis - 12x 280511 boulons à déverrouillage rapide - 8x 280420.N- 2x 280110.N de butée et angle de serrage - 2x 280162.N de butée et angle de serrage - 1x 283999 ensemble d’entretien Longueur de la table 2400 mmLargeur de table 1200 mmHauteur de table 850mm Réglage de la hauteur 50 mmPoids de la machine environ 0,99 t Auction-ID: A7-44764-14
Inclus : Ensemble de tuyaux 3m Méthode : soudage MIG/MAG (gaz inerte métallique/gaz actif métallique) Puissance : plage de réglage de 40 à 400 ampères Cycle de travail : 60 % de DE à 400 ampères. Auction-ID: A1-44739-17
-Consommation électrique 12 kVA - Soudage QINEO QINTRON 400 Pulse - Table rotative intégrée à un axe avec plaque de serrage -Robot industriel bras robotique 6 axes (marque CLOOS, probablement base KUKA) - Boîtier de sécurité entièrement enfermé avec une fenêtre de sécurité et une buse d’aspiration - Unité de contrôle portative Teach Panel avec interface CLOOS, clairement visible -Moulures extérieures Très bon état, abrasion minimale visible -Intérieur propre, aucune abrasion visible ni éclaboussure de soudure -Bras robotique Visuellement presque comme neuf, sans dommages visibles -Machine à soudage par impulsions QINTRON 400 (technologie moderne à arc pulsé) – en bon état - Panneau d’enseignement de l’unité de contrôle intact et connecté, aucun message d’erreur visible - Platine Mécaniquement stable, sans usure visible Auction-ID: A1-44719-1
Courant de soudage : 30 à 430ampères Tension secteur : 400 volts (triphasé) Cycle de travail (DE) : 40 % à 430 A, 60 % à 360 A, 100 % à 280A Degré de protection : IP 23Classe d’isolation : FIncluant : 3 m de tuyau Auction-ID: A1-44739-19
Pédale de pied à plaque à dégagement rapide à régime variable Auction-ID: A1-43823-15
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table de soudure inclinable et soulevée, fentes de serrage Dimensions totales 800x500x800 mm Auction-ID: A7-44061-16
: neu : 2025 : 090185 : prompt, Zwischenverkauf v : Polen : 7950 €: 153.44 €: 1 : 47 to: 110 mm: 27 mm: 25x18 mm: 8 s: 16 mm: 700 bar: 479 mm: 135 mm: 388 mm: 117 kgMOBILE HYDRAULICS-POWERSTATIONDouble action - fully automated process of punching and returnWide range of hole diameters up to 27mmIntelligent control system with inching and automatic load detectionMode indicator lightProtection against accidental start-upOPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Puissance de soudage : 40 - 350 / 12 - 40 Tension A/V Circuit ouvert : max. 56 Vvolt : courant de soudage : 100 % : 300 Vitesse de fil : 0 - 24 m/min Capacité : 15,9 kVA Tension : 3 ~ 400 V Fréquence : 50 Hz Liquide de refroidissement : F Classe de protection : IP 23 Poids de la machine environ : 153 + 22 kg Dimensions de la machine environ : 1,10 x 0,60 x 1,15 m Machine à soudreCLOOS - GLC 353 MC 3- inclus Unité de lecteur électrique CLOOS - CK98 Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
current intensivity: 140 Aplate thickness: 1,5 mmwelding range: CO2: 35 - 225 Awelding range: 30Ar+CO2: 30 - 250 Aweight of the machine ca.: ca. 90 Kgdimensions of the machine ca.: 0,4 x 0,8 x 0,8 mCondition: ready for operation: Electric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 500x300 mmwork height max.: 100 mmWeight: 120 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Special Item: Messeeinsatz table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.400 kgTrade Fair TABLESlight signs of wear on the surfaceWelding table:- 6 legs - basic equipment 650 mm- Through-hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Side cheek made of high-quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilled holes Surface in diagonal grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Side panel holes in diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
alésage : 16 mm de poids : 13 kgLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 913 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
490 € 
