sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 706)
Overview This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...
Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically trig ...
Overview This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Capacity: Not provided Formats: 0.75 L Gourmet bottle 0.25 L Gourmet bottle 0.25 L Vichy bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems: Base inspection (camera) Sealing surface inspection Thread inspection (conical opti ...
Aperçu L’inspection du niveau de remplissage a été réalisée en 2019 par le constructeur allemand Krones. La machine n’est pas installée pour le moment. Techn. détails : Capacité : 50 000 bph Inspection via émetteur gamma Krones Checkmat avec courroie de décharge
Aperçu Le contrôle de caisse a été construit en 2012 par le constructeur allemand Syscona. Le pourcentage de bouteilles étrangères à laquelle la caisse est rejetée peut être fixé. Détails techniques Capacité : 3 800 caisses/h Tirage longitudinal Formats utilisés précédemment : 12 bouteilles PET de 1L Inspection par caméra Incluant le distributeur pré-courroie et la ligne 230V/ 50Hz
Aperçu L’inspecteur Crate a été fabriqué en 2017 par le constructeur allemand Visiontec. Il est réglé pour des bouteilles en verre de 0,5 l et vingt caisses modul. L’inspecteur est équipé d’un système multi-caméras. Si une bouteille externe est détectée, la caisse sera poussée vers l’extérieur dans une autre ligne. Actuellement, la configuration est pour une longue caisse latérale à leeding.
Aperçu Cette machine d’inspection des niveaux de remplissage a été fabriquée en 2017 et la machine d’inspection des labels en 2015 par la société allemande Vision-Tec. La pousseuse était fabriquée par la société allemande BBULL. Il est conçu pour vérifier la hauteur de remplissage, la fermeture et l’étiquette des bouteilles pleines. La machine est en production jusqu’en octobre 2025. Capacité des données techniques : Portée de livraison ajustable Système d’inspection de niveau de remplissage | Vision Tec | Système d’inspection des étiquettes 2017 | Vision Tec | 2015 Système de rejet | BBULL
Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout d ...
Overview This Anker-Roland rotary labelling machine was manufactured in 1996 and is designed for the application of cold-glue labels on glass bottles. The machine is equipped with two labelling stations and four bottle plates, making it suitable for typical multi-label applications in beverage and spirits bottling lines. The configuration allows the application of neck and front labels and back labels. With a production capacity of approximately 3,000 bottles per hour at 0.7 L, the system is well suited for small to medium-sized production lines. The machine includes eight format equipment sets, covering bottle diameters from 60.5 mm to 86.5 mm, allowing flexible processing of several round bottle formats between 0.35 L and 1.0 L. Technical Data Manufacturer: Anker-Roland Machine type: Rotary cold-glue labelling machine Year of manufacture: 1996 Serial number: 1058/96/065L Labelling s ...
Overview This ENOS Base automatic self-adhesive labelling machine was manufactured in 2002 and is designed for the application of front and back labels on various bottle shapes. The machine uses pressure-sensitive (self-adhesive) labelling technology, which allows flexible processing without the need for mechanical format parts. The system can handle round, cylindrical, and square bottles within a volume range of 0.2 L to 1.0 L, making it suitable for a wide variety of beverage, spirits, or specialty product applications. With a production capacity of approximately 1,000 bottles per hour (0.7 L format), the machine is well suited for small to medium production environments. Technical Data Manufacturer: ENOS Model: Base Machine type: Automatic self-adhesive labelling machine Year of manufacture: 2002 Labelling technology: Pressure-sensitive (self-adhesive) Label positions: Front label Bac ...
Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data: manufacturer: ENOS, Italy model: Eticap year of manufacture: 2008 labelling Heads: 2 (wet-glue heads) Head 1: front and neck labels Head 2: back labels operation Direction: Left to right production Capacity: 4.000/h adjusted for: cylindrical glass bottles 0,7 L = Ø75mm 1,0 L = Ø86mm condition: Stored off-line since 2020, machine in a good condition actual label sizes: front label: 131mm height, 77mm width back ...
Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data Capacity: approx. 1,200 bottles/hour (standard labels) up to approx. 1,500 – 1,800 bottles/hour (small labels) approx. 1,100 bottles/hour (front and back from one roll) Formats: Diameter 50 – 100 mm, conical bottle shapes Application: Bottle labelling (beverage, wine, spirits) Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll Label positions ...
Aperçu Cette machine à étiqueter a été construite en 2005 par Gernep. Elle a fonctionné dans une usine de jus de fruits en Allemagne jusqu’en 01/2022. Dans cette entreprise, elle n’était utilisée qu’en service en un seul quart environ 100 jours par an, ce qui explique pourquoi l’état de la machine reste très bon. Caractéristiques techniques : Capacité : 6 000 bph pour bouteilles de 1 L Nombre d’agrégats : 2 Accessoires : Formats pour bouteilles en verre 1,0 l VdF, 0,7 l VdF, 0,2 l goiter bouteilles en verre Diverses pièces détachées incluses
Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 5,500 bottles/hour Formats: 0.75 L Bordeaux (H=309 mm, Ø74 mm) 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) 1.0 L Schlegel (H=309 mm, Ø89 mm) 0.75 L Burgunder (H=297 mm, Ø82 mm) Application: Labelling of glass bottles (wine) Configuration: Rotary machine with 2 cold glue labelling aggregates Label positions: Body (front), neck ring, back Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of De ...
Overview This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data Capacity: 10,000 bph Application: Juice Configuration: Gernep Labetta 4/3/10 640 2A Labelling technology: Cold glue / Rollina Labelling stations: 2 × cold glue aggregates Bottle Formats Container type: Glass bottles (fruit juice) Typical formats: 1.0 L VDF (H=307 mm, Ø90 mm) 0.5 L NRW (H=260 mm, Ø68 mm) Special capability: Suitable for hot-fill applications Label Data 1st cold glue station: Label length: approx. 25 – 140 mm Label height: max. 150 mm Lower edge: max. 15 mm Upper edge: max. 320 mm 2nd cold glue station (incl. wrap capability): Label length: approx. 25 – 140 mm Up to 170° wrap-around of bottle circumference Label height: ma ...
Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 6,000 bottles/hour Formats: 0.33 L / 0.5 L glass bottles Application: Labelling of glass bottles (beer) Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) Label positions: Body / wrap label, neck / chest label Utilities: 400 V / 50 Hz / GND / N Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue lab ...
Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) Container type: glass, transparent Container diameter: 59-67.5 mm Container height: 226-260 mm Closure material: metallic, closure diameter: 28 mm Belt heigh ...
Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data: manufacturer: Krones, Germany model: Contiroll HS 810-720 year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine, production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data: manufacturer: Krones, Germany model: Contiroll HS 810-720 year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine, production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC
Aperçu La machine a été construite en 2004 par le fabricant allemand Langguth et est entièrement révisée. Les images ne correspondent pas à la machine réelle, mais sont bien comparables et représentatives. Données techniques : Hauteur de collage jusqu’à 210 mm Complètement révisée comme montré sur les photos, mais avec un cadre de base en acier. Incluant 2 formats de bouteilles + 2 formats d’étiquette Optionnel avec platine à décollage
Overview This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. ...
Overview The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty. Technical data Capacity 12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm 14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles Easy format changeover due to quick-change system without tools Siemens S7 control system Bottle loading system with hopper 1000 l, in stainless stee ...
Overview This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data year of manufacture: 2009 capacity 60/min adjusted formats: 1,5L PET (2x(3x2)) operation: film only application: water, beer, CSD condition: very good, still connected Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available
Overview This shrink-wrapper was manufactured in 2011 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) and PET bottles (0,5L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data year of manufacture: 2011 capacity 60/min adjusted formats: 1,5L PET (2x(3x2)) and 0,5L PET operation: film only application: water, beer, CSD condition: very good, still connected Additional information conveyor for packages available
Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data Manufacturer: Kettner GmbH / Krones Group Machine Type: Bottle packer / crate packer Model: Blitzpac Junior E 3T Year of Manufacture: 2003 Application: Packing of ...
Overview This Krones - Linapac F-T-1800 automatic bottle packer was manufactured in 1998 and was previously installed in a returnable glass bottling line. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filler and inspection systems. The LINAPAC packer series is widely used in high-capacity beverage production lines due to its robust design and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-performance production environment and is suitable for integration into returnable glass bottling systems with similar capacity ranges. Technical Data Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Autom ...
Overview This Krones Blitzpac case packer, manufactured in 2003, is designed for the automatic packing of PET bottles into crates. The machine is configured for handling of 1.0 l PET bottles, packed into 12-bottle crates. The machine has a stated design capacity of approx. 2,700 crates per hour. Product handling is carried out by a mechanical / pneumatic matrix gripper system, which lifts multiple rows of bottles and places them into crates. The machine is fully enclosed with transparent safety guarding. Operation is controlled via an integrated MTS 10 HMI panel, with physical push-buttons and emergency stop. Technical Data Manufacturer: Krones AG Machine Type: Blitzpac case packer / bottle packer Machine Description: Blitzpac Einpacker 23/0673/006 Year of Manufacture: 2003 Application: Packing of PET bottles into crates Pack Format: 12-bottle crate Capacity: approx. 2,700 crates/hour Co ...
Overview This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data Brewhouse capacity: 5 hl Design: 2-vessel brewhouse Heating: Steam-heated Control: Semi-automatic PLC (Siemens) with touch panel Fermentation: Open fermenters with cooling jackets Scope of Delivery Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) Water Mixing Station | — | ...
Aperçu Le cratère a été utilisé dans une brasserie belge et a été arrêté à l’été 2024. Il servait à placer des bouteilles de 330 ml à fermeture mécanique dans une caisse en bois ou en plastique. Détails techniques Fabricant : TMG Année de fabrication : 2018 Modèle : IEC 61439-2 Format de la bouteille : 330ml Format de caisse : 4x3 caisse en bois ou plastique Capacité : 8 cycles par minute
