sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 108)
Additional technical specifications:• Hole diameter: 30 mm• Distance from hole center to hole center: 100 mm
Offre 26036 Données techniques approximatives : - Capacité de charge environ. 3000 kg - Diamètre de la plaque frontale 1520 mm - La plaque frontale peut être inclinée par le moteur - Électreur à mouvement rotatif. variable à l’infini - Transmission de courant de soudage 650 A - Transmission 400 V - Hauteur de la table en position horizontale environ 1450 mm - Re- + rotation dans le sens antihoraire - Télécommande portative - Footswitch - Espace environnant F 1700 x H 1500 x D 2300 mm - Poids environ. 2800 kg
TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled DIN EN 60974 -Length: 6.5 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 3.1 kg
TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 4 m -Connector: 5-pin -Transport dimensions: 340/340/H100 mm -Weight: 2.4 kg
Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 320 mm -Dimensions: 480/440/H470 mm -Weight: 38 kg
TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.4 m -Connector: 2-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.1 kg
Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 320/250 mm -Dimensions: 760/440/H470 mm -Weight: 40 kg
Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg
Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg
DALEX PMS 10-4 & Refroidisseur d’eau COHLINE DALEX, type PMS 10-4, machine de soudure industrielle par points puissante et robuste, dans un ensemble prêt à l’emploi avec une unité de refroidissement par eau COHLINE assortie. Points forts et état : Kilométrage extrêmement faible : Le système de contrôle numérique intégré DALEX MPS 100 affiche une lecture d’odomètre d’origine de seulement 13 282 cycles ! Pour une machine industrielle de ce calibre, c’est comme neuf et cela garantit une usure minimale. Forte force d’électrode : Ce modèle offre une pression de contact puissante allant jusqu’à 690 daN pour des soudures parfaites au point même sur des feuilles plus épaisses. Y compris le refroidissement : grâce à la puissante unité de refroidissement COHLINE (5,8 kW), la machine est immédiatement prête à fonctionner en service industriel p ...
wire electrode, welding wire, welding wire -Manufacturer: Elgar, started roll of MAG wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300/100 mm -Weight roll: 10.1 kg
Offre 26289 Données techniques approximatives : - Machine CNC à découpe à flamme avec 2 brûleurs comme montré - 2 hauteurs de brûleur + inclinaison réglable - Écartement de voie environ. 4,2 m - Longueur de voie environ 7,5 m - Hauteur de voie environ 0,5 m - Espace requis approximativement. L 8 x H 7,5 x H 2,3 m - Poids approximatif 3 T - Sans table de soutien
A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement.
An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement.
Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.
Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.
Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.
Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible.
An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.
Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.
Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Donaldson Torit, mobile welding fume extraction / dust collector type PT 1000 -Drive: 1.1 kW -Max. volume flow: 1100 m³/h -Extraction arm: Ø 165 mm x 2210 mm -Transport dimensions: 1200/620/H1645 mm -Weight: 105 kg
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg
A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.
Machine à souder Fabr. Migatronic Type. Automig 273
Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible.
Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg
