sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 108)
Dimensions (L/W/H): 2900x1800x1100 mmTotal power requirement: 1,5 kWWeight: 550 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2900x1800x1100 mmTotal power requirement: 0 kWWeight: 550 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1350x1150 mmweight: 500 kgtotal power requirement: 1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1980x1390x1240 mmWeight: 400 kgTotal power requirement: 2,3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2120x1585x1025 mmWeight: 560 kgTotal power requirement: 2,3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1106x883x543 mmWeight: 195 kgTotal power requirement: 2,3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacité de courant : 8,0 kVAgorge : 80 - 480 mmcapacité de pression de contact : 17 - 235 daNhorn espacement : 140 mm mm capacité nominale : 8,0 kVAtension : 380 Vpuissance totale requise : 17,8 kVApoids de la machine env. : 77,5 kgdimensions de la machine env. : 0,35 x 0,80 x 1,05 m- N° de série : 18310126 - 2Les données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
courant de soudage : 10 - 200 Afréquence de charge connectée : 230 Vpoids : 6,5 kgDimensions (LxlxH) : 380 x 120 x 250 mmTIG SOUDEURAC/DC, PulseUnité de démonstration dans un boîtier en aluminiumComprend tous les accessoiresVoir les imagesLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Longueur de la plaque de sol : 1500 mm Largeur de la plaque de sol : 1260 mm Hauteur de la plaque de sol : 400 mmLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
table length: 2990 mmtable width: 1490 mmtable height: 850 - 900 mmweight of the machine ca.: 0,8 tWelding table / perforated table:with milled and deburred holesHole diameter: 28 mmThe table is made of 15 mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side panels 165 mmHeight adjustable from approx. 880 - 980 mmRibbed underside for reinforcement.Including floor bearingsAccessories optional!Surface flatness 0.2 - 0.5 mm over 1000 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tWelding table / perforated table:with milled and deburred holesHole diameter: 28 mmThe table is made of 15 mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side panels 165 mmHeight adjustable from approx. 880 - 980 mmRibbed underside for reinforcement.Including floor bearingsAccessories optional!Surface flatness 0.2 - 0.4 mm over 1000 mm.The table can be moved with a pallet truck.Pallet truck is not included.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 20 tworkpiece diameter: 300 - 3600 mmTurning speed: 70 - 1200 mm/minroll diameter: 350 mmWheel width: 110/175 mmdrive motor: 2 x 0,55 kWtotal power requirement: 1,1 kWweight of the machine ca.: tdimensions of the machine ca.: 2,5 x 1,5 x 1,0 m• demonstration unit• unused vessel turning unit,• with steel rolls, manual adjustable roller spacing,• one roller unit with twin drive with variable adjustable rotational speed,• one roller unit without drive.• CE-markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! SPECIAL OFFER SIEGMUND Welding Table Retro 2400x1200x200 incl. accessoriesProduct description- High-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5–27 mm- Hole Ø 28 mm- Holes surface 100x100 mm grid- Corners, edges, and holes rounded- Side panel height 200 mm- Side panel holes in diagonal grid- Construction reinforced with ribs- Grid lines enable precise assemblyThe welding tables are equipped with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- Corrosion-resistant / higher load capacityFeatures:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- Plasma-nitrided version with scale- Includes 4x feet Basic equipment- ...
table length: 1000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 416 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
