sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 108)
cutting range for steel to: 12.0 TS mmcutting range for steel to: 8.0 QS mmcapacity at 100%: 30.0 Amperecutting medium: Druckluft output: von 20 - 40 Ampereoutput: Eingang 4.9 KWvoltage: 230 Vweight: 17.9 kgrange L-W-H: 480 x 210 x 340 mmThe Avalon 40.1 is a lightweight, handy plasma cutting system with high cuttingcutting performance and top cutting quality. Its low weight and easy handlinghandling make it the ideal candidate for trade, workshop and industry.industry. Cuts carbon steel, stainless steel, aluminum, copper ...Features- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch for activating the air flow to set the test air pressure. without having to trigger the burner.- Powerful compact unit- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the. ...
table length: 2000 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 843 kgSpecifications- High-quality S355J2+N steel + plasma nitriding- Material thickness approx. 24.5–27 mm- Hole diameter 28 mm- Holes in 100×100 mm grid pattern- Rounded corners, edges and holes- Side panel height 200 mm- Hole spacing on side panel: 50 mm- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise set-ups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current capacity: 42 kVAcontact pressure capacity: 600 kpweight of the machine ca.: 170 kgdimensions: 1200 x 900 x 1350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 544 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 521 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- Extreme plasma ...
table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current capacity: 16 kVAthroat: . mmcontact pressure capacity: . kptotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 8682805/2The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 tworkpiece diameter: 7000 mmroll diameter - bore: 500 mmWheel width: 180 mmDistance of shafts: 100-3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mEach has a load capacity of 20 t.Both together can support a weight of 40 t.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - ...
floor-plate length: 4500 mmfloor-plate width: 1600 mmfloor-plate height: 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m950,- € m²The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 50 mmangle adjustable from - to: 25-55 Gradspeed: 3 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current capacity: 8,0 kVAthroat: 80 - 480 mmcontact pressure capacity: 17 - 235 daNhorn spacing: 140 mm mmrated capacity: 8,0 kVAvoltage: 380 Vtotal power requirement: 17,8 kVAweight of the machine ca.: 77,5 kgdimensions of the machine ca.: 0,35 x 0,80 x 1,05 m- Serial-No.: 18310126 - 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range for steel to: 76 mmcapacity at 100%: 51 mmcutting medium: 400 Ampregulated drive: 50-150 und 100 - 400 AmpSteuerSteuercontrol voltage: 24 Voltweight of the machine ca.: 750 kgdimensions of the machine ca.: 82 x 122 x 930 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
tool adaptor: . weight: . kgmaterial: . Recordings made by Hertel, Komet, etc.Approx. 29The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
floor-plate length: 4500 mmfloor-plate width: 1600 mmfloor-plate height: 370 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m950,- € m²The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
floor-plate length: 4600 mmfloor-plate width: 1620 mmfloor-plate height: 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m950,- € m²The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 60 tworkpiece diameter: 6000 mmgear diameter: 680 mmgear width: 230 mmDistance of shafts: 900-3500 mmaxis height: 550 mmtotal power requirement: kWweight of the machine ca.: 4,5 (9 ) tdimensions of the machine ca.: mLoad capacity per piece 30 t load-carrying along 60 tThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the s ...
length: 0 mmheight: 0 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mUltrasonic Welding Machine for Plastic ArticlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: max. 1000 kgturning speeds: 0,18 - 0,58 U/minheight: 976 - 1436 mminclination: 0 - 115 °table diameter: 895 mmvoltage: 380 Vtotal power requirement: 2,0 kWweight: 685 kgrange L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on requestThe AK BEND SRH hydraulic welding positioner is idealfor welding, assembly and maintenance work. Positioning is done via ahydraulic rotation and tilting function.Description:- electro-hydraulic turning and tilting function- Fast handling of workpieces- Maximum productivity thanks to optimal working position- Lifting, tilting and turning workpieces in one clamping- Low idle times thanks to turning components- Maximum work performance thanks to comfortable working- Back-friendly working for the userEquipment:- Continuously variable speed adjustment- Freely movable foot ...
table load: max. 40 t twith manual operation panel: ja weight of the machine ca.: 22 t: 1918 Year: ca. 1990 Control: Dimensions (L/W/H): 3500 x 2300 x 2400 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 6 Meterweight of the machine ca.: 1 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: GoodAire 1800 output: 1.800 cbm/Stundeweight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
