Fabricante:
(Categoría: 105)
Hay disponible una sierra de cinta horizontal de doble columna Behringer. Rango de corte de material redondo: 340 mm, rango de corte de material cuadrado: 340 mm/340 mm, velocidad de corte: 120 m/min, dimensiones de la cinta de sierra X/Y/Z: 4860 mm/32 mm/1,1 mm, dimensiones de la máquina X/Y/Z: aprox. 3250 mm/2600 mm/1650 mm, peso: aprox. 2500 kg. Es posible realizar una inspección in situ.
Capacidad de corte: material redondo 90: 260 mm, material plano 90: 300 mm / 260 mm, material redondo -45 a 45: 200 mm, material redondo 60: 165 mm, dimensiones de la cinta de sierra X / Y / Z: 2910 mm / 27 mm / 0,9 mm, velocidad de corte: 110 m / min. Dimensiones de la máquina X/Y/Z: aprox. 1500 mm/1850 mm/1500 mm, peso: aprox. 900 kg, control: Kasto CompactControl, horas de funcionamiento: aprox. 200 h. El control de la máquina ha sido renovado. Documentación disponible. Es posible realizar una inspección in situ.
saw blade diameter: 320 mmcutting diameter: 140 mmstroke: mmtotal power requirement: 3 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sierra de corte largo para el corte de perfiles de aluminio con empujador de avance en muy buen estado Longitud máx. de corte: 700 mm Altura máxima de corte: 130 mm Diámetro máx. de la hoja de sierra: 450 mm Longitud de avance del empujador de material máxima 6.200 mm El sistema se desmonta en nuestro almacén Más datos técnicos a petición
Oferta 25071 Características técnicas: - E.-Hydr. Elevación-descenso del soporte de la sierra - Dimensiones de la hoja de sierra: 400 x 45 x 2,0 mm - Rango de corte - 90° redondo aprox. 250 milímetros - Plano aprox. 250 x 130 mm - Cuadrado aprox. 220 x 220 mm - Anchura máx. de apertura de la mordaza 405 mm - Velocidades de elevación + velocidades de corte ajustables - Tornillo de banco ajustable a inglete - E.-Mot. Configuración del refrigerante - Accionamiento 380 V / 2,0 kW - Necesidad de espacio aprox. 550 x 1270 x 1700 mm - Peso aprox. 380 kg
cutting diameter: mmsaw band length: mmtable height: mmweight of the machine ca.: 3 tdimensions of the machine ca.: mDimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’Band width in mm: 41Band length in mm: 5600Band thickness in mm: 1.3Automatic band saw (360 mm)SMA-REF-7091Category: BandsawsManufacturer: PehakaType: PEHAKAMAT 360 ZPYear of manufacture: 2000Saw blade: 5.600 x 41 x 1,3 mmWorking range:90° round 360 mm90° square 360 x 360 mmSpecial features:roller conveyor 1,300 x 380 mmhydr. belt tensioningDimensions Weight: 3 tonnesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diámetro de la hoja de sierra: 360 / 425 / 460 mmdiámetro de corte: 10 - 140 mmcarrera: mmvelocidad de corte: 25 - 160 m/minpotencia total requerida: 35 kWpeso de la máquina aprox.: 4,2 tdimensiones de la máquina aprox.: 2,8 x 1,8 x 2,2 mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
cutting diameter: 520 mmsaw band length: 7239 mmcutting width: 1,3 mmControl: POSIMOD cutting range - square -: 520 x 520 mmfeed length: 500 mmfeed length: multiple: 4500 mmmin. cut-off length: 6 mmlength of rest piece min/max: 10 / 100 mmcutting speed: 20 - 130 m/mindimensions of saw-band: 7239 x 50 x 1,3 mmsawing motor: 5,5 kWtotal power requirement: 10,0 kWweight of the machine ca.: 3,8 tdimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m- 2 column guided -Accessories: roller track 2500 mm length, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmControl: total power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,1 x 0,95 x 1,7 mNew machines SPECIAL PRICE includes:- Starter Kit 2- Micro-spraying systemReady for demonstration in our showroomRoller conveyors optionalHydropneumatic fully automatic· Miter Left/Right· Bevel head cuts up to 45° (shifter) a. b.· Pneumatic vertical clamping device· Vice before and after the saw blade for low-burr cuts· Material hold-down roller· Integrated coolant spray device· Swarf suction nozzle on the saw blade protective hood· Single feed 530 mm· Section length min. 4 mm max. 9,999 mmFor profile cuts, the use of our B & S Coolmatic ...
Rango de corte redondo: 170 mm Área de corte rectangular: 170 x 170 mm Dimensiones de la hoja de sierra: 3000 x 25 x 0,9 mm Velocidad de la cinta: 150, 355 y 95 m/min Accionamiento de la sierra: 380 V, 0,75 kW kW Espacio necesario: 1400 x 600 x 800 mm Peso: 340 kg
Hay disponibles un total de siete sierras circulares para metal de Kaltenbach y Adige. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. Es posible la inspección in situ.
Diámetro del rollo: - mmgarganta: - mmaltura de la pieza de trabajo: - mmPotencia total requerida: - kWpeso de la máquina aprox.: - tdimensiones de la máquina aprox.: - mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
Hydr.- Inglete de dos columnas - Máquina de sierra de cinta metálica Características técnicas: - Rango de corte a 90 Redondo 360 mm - Rectángulo 600 x 360 mm - Rango de corte a 45 redondos, 320 mm - Ajuste de inglete mediante volante - Dimensiones de la hoja de sierra: 5400 x 38 x 1,3 mm - Velocidad de incisión. Variable de forma continua 19 - 130 m/min - Presión de corte ajustable de forma continua 0 - 10 m/min -Uno. Sujeción del material - Preselección de la altura de elevación de la hoja de sierra - Dispositivo de refrigerante por micro pulverización - Potencia total de accionamiento 400 V / 8 kW - Necesidad de espacio aprox. 1800 x 2000 x 3250 mm - Peso aprox. 2200 kg - Transportadores de rodillos de alimentación + descarga cada uno aprox. 6000 / 8000 milímetros
Oferta 25114 Datos técnicos aprox.: - Diámetro del rollo 500 mm - Proyección 500 mm - Altura máx. de paso: 400 mm - Tamaño de la mesa 630 x 530 mm - Mesa giratoria 10 / 30 - Altura de la mesa desde el suelo 950 mm - Longitud de la hoja de sierra aprox. 3900 milímetros - Ancho de banda de la sierra aprox. 3 - 25 mm - Velocidades de corte ( presumiblemente ) 81 – 145 – 208 - 267 m/min - Accionamiento 400 V / 1,1 kW - Peso aprox. 400 kg - Necesidad de espacio aprox. 750 x 2000 x 1000 mm
Oferta 23426 Características técnicas: - Rango de corte a 90 alrededor de 420 mm - Plano 635 x 290 mm - Rango de corte 45 redondos 360 mm - Plano 420 x 300 mm - Dimensiones de la hoja de sierra: 5200 x 32 x 1,1 mm - Velocidades de corte continuas de 18 a 108 m/min - Hidra. Subir + bajar el bastidor de la sierra - Hidra. Tornillo de banco de material - Presión de corte ajustable de forma continua 0 - 10 m/min - Potencia total de accionamiento 400 V / 2,2 kW - Dispositivo de refrigeración - La máquina está montada sobre un bogie - Transportador de rodillos de alimentación. accionado 4000 mm - Transportador de rodillos de descarga con tope de dimensión 6000 mm - Necesidad de espacio aprox. 2500 x 1400 x 1100 mm - Máquina de pesas aprox. 950 kg - Peso de los transportadores de rodillos: 2000 kg
Oferta 25115 Brazo radial - Schiffterschnitt - Sierra de tren de péndulo Características técnicas: - Diámetro de la hoja de sierra 400 mm - Velocidad de la hoja de sierra 3000 rpm - Altura de corte hasta aprox. 125 milímetros - Profundidad de corte de hasta aprox. 600 milímetros - Inglete ajustable en 2 ejes - Tamaño de la mesa aprox. 800 x 800 mm de ancho x profundidad - Altura de la mesa 920 mm - Accionamiento 400 V / 1,5 kW - Necesidad de espacio aprox. 800 x 1900 x 1100 mm - Peso aprox. 200 kg
Oferta 22252 Características técnicas: - Rango de corte a 90 redondos + cuadrados 330 mm - Plano 600 x 320 mm - Inglete ajustable izquierda / derecha 30 / 45 - Schnittb. a 45 Re + Li redondo 320 mm - Plano 350 x 320 mm - Altura de soporte del material aprox. 920 milímetros - Dimensiones de la hoja de sierra: 4440 x 34 x 1,1 mm - Velocidad de corte ajustable de forma continua de 10 a 100 m/min - Hidrat. Elevación: descenso del bastidor de la sierra - Límite superior de la carrera del bastidor de la sierra - Presión de corte ajustable de forma continua 0 - 10 m/min - Hidrat. Tornillo de banco de material - Dispositivo de refrigeración - Potencia total de accionamiento 400 V / 2,2 kW - Necesidad de espacio aprox. 1400 x 1400 x 2400 mm - Peso aprox. 1000 kg
Key data: 550 mm
Longitud máx. de la sierra: 6.000 mm Longitud de corte mínima: 335 mm Diámetro máx. de la hoja de sierra: 550 mm Posicionamiento automático de la longitud mediante el control E 255 Giratorio interior y exterior 22,5° - 90° - 140° Inclina los ángulos entre 45 y 90 grados Pantallas digitales de ángulo Transportador de rodillos móviles Dispositivo de pulverización de cantidad mínima
cutting diameter: 255 mmsaw band length: 2765x 0,9 x 27 mmcutting width: 300 x 180 mmturning speeds: 35 + 70 U/mintotal power requirement: 1,8 kWweight of the machine ca.: 450 tdimensions of the machine ca.: 1,7 x 1,23 x 1,75 mSPECIAL PRICE!Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250Super HA-I Easy• miter left 60° + right 45°• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Hydraulic vice can be moved sideways a.• Guided, high quality industrial bearings• Solid vice + machine casting• Large machine bed• Machine base with tool compartment and chip drawer• Cut monitoring by ammeter• Cutting pressure feed regulator• Support roller (infeed side)• Ball bearing turntableSemi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the s ...
capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 saw band length: 5850 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,45 tdimensions of the machine ca.: 5,85 x 3,6 x 2,7 m2-column band saw for quick cutting, K-tech 800Hwith pusher system P 15. P 30 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleReso ...
saw blade diameter: 250 mmcapacity 90 degrees: round: 85 mmcapacity 90 degrees: square: 75 mmcapacity 90 degrees: flat: 100x65 mmcapacity 45 degrees: round: 80 mmcapacity 45 degrees: square: 75 mmcapacity 60 degrees: flat: 90x60 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,04 tSPECIAL PRICE!The assembly saw with extensive standard equipment and a large cutting area· For miter cuts left up to 45°· For sawing steel, stainless steel and, to a limited extent, aluminum profiles· Automatic cooling directly on the saw blade· 24 V safety switch in the handle with restart lock· 38 kg total weight = easy to transport· Length stop, assembly toolOptions:Saw blade 57 EURMachine base type 20505 192,-EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 330 mmcapacity 90 degrees: flat: 510 x 320 mmcapacity 90 degrees: square: 320 x 320 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgSemi-automatic, electro-hydraulic band saw machine for cutting60° left to 60° right.Versatile machine with a tape of 4640 x 34 x 1.1 mm for theCutting pipes, profiles and beams up to a maximum cutting rangefrom 510x320 mm to 0°.The control console on a swiveling arm allows for comfortable andsafe operation from any position.Electronic inverter for continuous belt speed regulationfrom 15 to 100 m/min.Large turntable with a diameter of 280 mm and engravedexact fine scaling, easily adjustable and stored.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 315 mmcapacity 90 degrees: round: 108 mmcapacity 90 degrees: square: 93 mm: 150 x 90 mmWorking height: 920 mmsaw blade turning speeds: 17+33 oder 33+66 U/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,328 tdimensions of the machine ca.: 0,8x0,9x1,7 mACTION PRICE!High-performance vertical circular saw VKS 315 (Article 20150)• miter left 60° + right 45°• Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift• Saw table with large rotating plate and particularly stable vice for optimal material tension• Robust prism guide of the saw head (dovetail guide adjustable)• Automatic cooling• Machine base with chip drawer• Metal handle for high clamping forceATTENTION: Price is without saw blade! (saw blade price EUR 109)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 15 - 70 U/mintotal power requirement: 1,8/2,2 kWweight of the machine ca.: 0,71 tdimensions of the machine ca.: 1,9 x 1,45 x 2,1 mACTION PRICE!High-performance vertical circular saw hydropneumatic fully automatic.(20192)· miter left 60° + right 45°· Hydro-pneumatic control of the saw unit· Electro-pneumatic material feed unit· Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results· Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter· Precision prism guide of the gear head, laterally adjustable· Particularly stable base frame with built-in automatic cooling system· Large chip drawer· Chi ...
Diámetro de corte: - mmLongitud de la cinta de sierra: - mmAltura de la mesa: - mmRequisito de potencia total: - kW peso de la máquina aprox.: - tdimensiones de la máquina aprox.: - m
capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 saw band length: 8140x54x1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,96 tdimensions of the machine ca.: 5,7 x 4,0 x 2,75 m2-column band saw for quick cutting, K-tech 1200Hwith pusher system P 30. P 60 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleResourc ...
capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 330 mm: 500 x 310 band speed: 15 - 100 m/mintable height: 844 mmdimensions of saw-band: 4250 x 34 x 1,1 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 2,4 x 1,935 mACTION PRICE!2-column double miter band saw K-tech DG 50/33 HA-I• 2-column miter saw• Solid, yet easy to use• Material height sensor (automatic cut start detection)• Smooth running thanks to bevel cut, feed controller + cutting pressure controller• Massive material infeed roller• Removable chip tray (disinfection)• Energy-saving and low-vibration thanks to bevel cut• Ergonomic, safe and free-standing control panel• Frequency-controlled saw drive 15 -100 m/min.• Hydraulic cutting pressure control valve• Hydraulic control of saw frame and vice• LEDs for monitoring all safety functions• L ...
capacity 90 degrees: round: 172 mmcapacity 90 degrees: square: 170 mm: 170 x 170 dimensions of saw-band: 2035 x 20 x 0,9 mmdimensions: 430 x 960 x 520 mband speed: 30 - 80 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 38 kgSPECIAL PRICEBerg & Schmid - Assembly band saw PBS 171 ESCPowerful and particularly robust metal band sawAluminum die-cast saw table and infinitely variable cutting speed forMiter cuts up to 60°Optional: machine base type 20508The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 240 mmdimensions of saw-band: 2730 x 27 x 0,9 mmtable height: 920 mmcutting speed: 35 + 70 m/min: 240 mmstroke back stop: 230 mmcross-slide: 270x230 : 210 Impact energy: 200 Air consume per blow: 200x210 : 130 mm: 130 mm: 130x160 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,26 tdimensions of the machine ca.: 0,9 x 1,6 x 1,74 m• miter left 60°• Quick-release vise with quick-release device a.• Quick release lever for easy handling• Frame and gear made from one piece, very quiet cut and very low vibration• Electrical monitoring of band tension and band breakage, saw band cover.• Carbide saw band guide• Large machine bed• Machine base (disassembled) with automatic coolingThe AutoCut system consists of:Hydraulic cylinder, feed control, spring assembly, limit switchAutomatic saw frame lowering via the hydraulicCylinder, continuously adjustabl ...
saw blade diameter: 315 mmcapacity 90 degrees: round: 108 mmcapacity 90 degrees: square: 93 mm: 150 x 90 mmWorking height: 920 mmsaw blade turning speeds: 17+33 oder 33+66 U/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 0,8x0,9x1,95 mSPECIAL PRICE!High-performance vertical circular saw VKS 315 HA (20154/20155)• miter left 60° + right 45°• Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift• Saw table with large rotating plate and particularly stable vice for optimal material tension• Robust prism guide of the saw head (dovetail guide adjustable)• Automatic cooling• Machine base with chip drawer• Metal handle for high clamping force• Spring packageSemi-automatic function:1. Saw starts2. Clamp material3. Rapid lowering to the beginning of the material or cut the same for ser ...
