Modelo
(Fabricante: WMT)
4 FORMAS DE REMOVER HUESOS DE PINO, WMT Descripción técnica: Material: acero inoxidable Aisi-304 Fuente de alimentación: 380/440 V - 50/60Hz Ancho de malla: (x4) 245 mm Ancho de trabajo: (x4) 210 mm Dimensiones: 2050 x 1650 x 1650 mm
table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Longitud de la mesa: 1200 mm Ancho de la mesa: 800 mm Altura de la mesa: 980 mm: kgweight de la máquina aprox. 0,95 tEstación de trabajo - Diámetro del agujero: 28 mm - Cuadrícula: 100 x 100 mm - Paneles laterales: 150 mm - Grosor del panel: 10 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
número: 93 Peso de posición: 320 kg Condición: NEU : 28 mm Dimensiones: 1,0 x 0,6 x 0,85 m Conjunto especial de 93 piezas, sistema de 28 mmIncluye carro de herramientasMaterial: acero bruñido de alta calidadAlcance de entrega: ver imágenesLos datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.
número: 102 Peso de posición: 320 kg Condición: NEU : 28 mm Dimensiones: 1,0 x 0,6 x 0,85 m Conjunto especial de 102 piezas, sistema de 28 mmIncluye carro de herramientasMaterial: acero bruñido de alta calidadAlcance de entrega: ver imágenesLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
número: 80 Peso de posición: 150 kg condición: neu : 28 mm Dimensiones: 0,8 x 0,6 x ,05 m Conjunto especial de 80 piezas, sistema de 28 mm Material: acero bruñido de alta calidad Alcance de entrega: ver imágenesLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
número: 10 Stk. Rango de sujeción: 25 mm: 28 mm Peso: 10 kg Dimensiones: 0,3 x 0,3 x 0,3 x 0,2 m10 Pernos de sujeción rápida - sistema de agujeros de 28 mm - para 25 mm de espesor de mesa Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.
: 6000 kg length: 3000 mm width: 1600 mm height: 570 mm : fest : lenkbar size of tyres: 406 x 127 mm weight of the machine ca.: t dimensions of the machine ca.: 3,99 x 1600 x 570 mm Heavy-duty trailer with - turntable steering - robust, low maintenance - 30mm impregnated wooden platform - Standard paint finish varies. Available in your RAL color upon request. Need other load capacities and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION! Tools are designed for 25mm thick tabletops. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
número: 10 Posiciónpeso: 30 kgcondición: neu : 28 mm5 abrazaderas de tornilloLongitud de empuje 155 mmLongitud 300 mmCondición: nuevoDiámetro del orificio 28 mmLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
longitud: 1700 mmanchura: 600 mmaltura sobre el suelo: 860 mmcapacidad de carga de la mesa: 400 Kgdimensiones: 1700 x 600 x 400 mpeso: 70 kgBanco de trabajo con 6 cajones y encimera de madera macizaDimensiones del compartimento de la puerta (ancho x fondo x alto) 940 x 400 x 440 mmDimensiones pequeñas de los cajones (ancho x fondo x alto) 460 x 400 x 120 mmAjuste de altura: máx. 40 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
table length: 2990 mm table width: 1490 mm table height: 850 - 900 mm weight of the machine ca.: 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 5000 kg length: 5000 mm width: 2000 mm height: 500 mm weight: 1250 kg length in total: ca. 6300 mm transport measurements: ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000 mmAnchura de trabajo: 400 mmAnchura de la rueda: 400 mmDiámetro del rollo: mm: kgAjuste de altura: 750 - 1100 mmPeso de la máquina aprox.: 0,80 tdimensiones: 2,0 x 0,55 x 1,0 mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: mm : 4000 kg height of stroke: 510 - 1550 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item ...
espesor de la placa: 0,8 mm garganta: 180 mm diámetro del rollo: mm peso de la máquina aprox.: 22 Kg dimensiones de la máquina aprox.: 500 x 450 x 160 mm La máquina de rebordeado está equipada con: - Interruptor de emergencia- Interruptor de pie- 7 piezas. Juegos de rollos
: 150000 kg length: 12000 mm width: 5000 mm height: 1400 mm : lenkbar : lenkbar size of tyres: 645 x 250 mm dimensions: 14,4 x 5,0 x 1,4 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Longitud del transportador de rodillos: 6000 mm Peso del material máx.: 300 Kg/m Ancho de la rueda: 350 mm Diámetro del rollo: 60 mm Altura de trabajo ajustable: 840 - 950 mm Peso: 160 kg Longitud en ancho: 620 mm Longitud en total: 6000 mm Transportadores de rodillos sin sistema de parada. Ejecución estable. Están disponibles de 2 a 6 metros de longitud.
: 15000 kg length: 10000 mm width: 2450 mm height: 625 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 2,9 t dimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 12 mm : max. 600 U/min. working area: max. 1100 mm engine output: 0,6 kW weight: 30 kg Electric tapping machines for M3 - M12 threads, 8 pcs. quick-change chuck with slipping clutch. Adjustable via display: variable speed, adjustable depth, choice of Main direction of rotation, torque. Documentation in English! Options: - Clamping table with T-slots: 990x700x800mm. - Magnetic base. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
longitud de impacto: 2000 mm Peso del material máximo: 300 Kg/m Ancho de la rueda: 350 mm Diámetro del rollo: 60 mm Altura de trabajo ajustable: 840 - 950 mm Peso: 73 kg Longitud en ancho: 620 mm Longitud en total: 2400 mm Transportadores de rodillos con sistema de parada. Ejecución estable. Están disponibles de 2 a 6 metros de longitud.
: 3000 mm Anchura de trabajo: 360 mm Anchura de la rueda: 360 mm Diámetro del rollo: 60 mm : 900 kg Ajuste de altura: 650 - 1100 mm Peso de la máquina aprox.: 0,050 t Dimensiones: 3,1 x 0,45 x 0,6 m
: 10000 kg length: 6000 mm width: 2450 mm height: 587 mm : lenkbar : lenkbar size of tyres: 406,4 x 254 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 7,2 x 2,5 x 0,6 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t dimensions: 2,4 x 1,2 x 0,95 m Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165mm Bottom ribbed for reinforcement. Incl. floor bearing Accessories optional Surface evenness 0.2 - 0.4mm over 1000mm. - with drawer unit - Grid shelf - Heavy-duty castors steerable Welding accessories shown not included! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diámetro máx. de la muela abrasiva: 150 mm ancho de la muela abrasiva: 20/40 mm diámetro del cono: 12,7 mm frecuencia de carga conectada: 230 V potencia del motor: 0,25 KW peso: 10 kg dimensiones: 0,37 x 0,2 x 0,24 m
: 5000 kg length: 6000 mm width: 2450 mm height: 527 mm : lenkbar : lenkbar size of tyres: 406,4 x 127 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 7,2 x 2,45 x 0,527 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
espesor de la mordaza: 160 mm rango de sujeción: 230 mm altura de sujeción: 52 mm peso: 18 kg mordaza de máquina con plato giratorio.
