subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 706)
Overview This complete 600L brewhouse and fermentation line was manufactured between 2009 and 2014 by Cespedes (Spain) and Cerveza Artesana SL. It includes mashing and boiling kettles, fermenters (both isobaric and atmospheric), utilities, and packaging equipment. The line was used for small-scale craft beer production and remains in good overall condition, available immediately. Technical data Main Manufacturers: Cespedes, Cerveza Artesana SL, Stellin, Duofiller Year of Manufacture: 2009–2014 Capacity: 600L brewhouse / fermenters up to 1,200L Heating System: Electric resistances (mash & boil kettles) Filling System: Semi-automatic can and bottle filling Utilities: Includes pumps, heat exchanger, and carbonation equipment Condition: Good, complete and ready for installation Scope of Delivery Mashing tun | Cespedes | – | 2010 | Dimensions in cm: 200×110×110 | 600 L, electrically ...
Resumen: El aplicador de mango fue fabricado por la empresa alemana Automation & Engineering GmbH en 2001 y hasta hace poco formaba parte de una línea de llenado PET en un gran fabricante alemán de refrescos. El aplicador de mango ya está siendo lanzado. Datos técnicos Potencia total: 70 ciclos/min conexión eléctrica: 400V/N/PE/50Hz, 5,1kW Información adicional transportadora para paquetes disponibles
Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately. Technical details Capacity: 9000 containers/h (varies according to bottle volume and product). Container Max. Diameter: 100mm Max. Height: 300mm Control Siemens S7 Single machines Bottle Hopper | ALWID | POSIMAT-ACCESS-N15 Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally ...
Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation. Technical Data Capacity: 40,000 bph (at 0,25L) Bottle Formats: 0.25L, 0.33L, 0,5L Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl Application: beer, CSD, or other beverages in non-returnable glass bottles Hygienic design Automated change-over Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or ...
Overview This cold glue labeller was manufactured in 2012 by German company KRONES AG. The TOPMATIC is equipped with 42 bottle stations (pitch 125 mm) and was operated on 330 ml bottles. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: Max. 60,000 bph Nominal 43,000 bph Formats: 330 ml Labelling technology: Cold glue Configuration: 42 bottle stations Pitch: 125 mm Inspection: Label inspection system CHECKMAT (Krones) Dimensions: approx. 430 × 340 × 245 cm Power supply: 400 V, 20 A, 14 kW
Overview This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing. Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators
Overview This semi-automatic can filling machine was built in 2020 by the Italian manufacturer EMMA SRL and is in excellent condition as it has been regularly serviced by the manufacturer. The machine is immediately available and is being sold due to a capacity expansion by a larger model from the same manufacturer. Technical details Output: approx. 350-400 cans per hour Formats: 330 ml (Sleek); format parts for 440 ml included Filling system: Isobaric with CO₂ pre-ventilation, CO₂ tunnel, CO₂ lid gassing Seaming: Integrated single-head can seamer Power supply: 0.8 kW, 220V, 50 Hz Compressed air consumption: 180 L/min at 6 bar Dimensions (L x W x H): 1100 x 1130 x 1160 mm Weight: 280 kg
Resumen El relleno a presión fue fabricado en 2013 por el fabricante alemán KHS. El rellenador a presión sigue utilizándose en una gran cervecería alemana y puede inspeccionarse en cualquier momento. Datos técnicos Capacidad: 22.000 - 65.000 bph Número de estaciones de servicio: 168 Número de estaciones de tapado: 24 Círculo de paso de relleno: 5040 mm Alcance de entrega Nodo de válvula Unidad de vacío Entrada higiénica Inspección del nivel de relleno y cierre Cinta de rechazo y rechazo Documentación técnica Copia de seguridad del programa Extensos transportadores disponibles, que pueden adquirirse además
Overview This isobaric PET bottle filling and capping machine was manufactured in 1996 by German company Krones. The block machine includes an ALCOA capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected. Technical data filling and capping machine as a block system number of filling stations: 132 number of capping stations: 30 isobaric filling system suitable to carbonated soft drinks capping system: ALCOA Kupi 30/1080 for screw caps cap feeding system: Gassner capacity: 36.000/h at 1,0L including neck handling system bootle lifting cylinders direction: left-right / clockwise
Overview This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...
- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...
Sistema de ablandamiento de agua de Berkefeld: intercambiador iónico para reducir la dureza de calcio y magnesio con 2 tanques de filtro y tanque de salmuera. Adecuado para funcionamiento continuo. Año de fabricación: 1993 Capacidad: 6000 l/h, título adicional: intercambiador iónico
Planta CIP para Seitz combifilter Año de construcción: 1990 El sistema manual consta de tanque cáustico, intercambiador de calor y bomba de circulación. Título adicional: con depósito CIP calefactado, CIP-Tanque: 1500 l, Características: tanque CIP, tubo de fibrado intercambiador de calor, bomba, tuberías
Capacidad: 600 cajas / h, Potencia: 8 kW, Longitud: 2,93 m, Ancho: 1,70 m, Altura: 1,60 m, Formatos: caja-formiforme 400 x 300 x 300, Dirección de carrera: de izquierda a derecha
Tanque de decantación cáustica: 1 tanque cilíndrico vertical Capacidad: 13600 litros con aislamiento y chapa trapezoidal de aluminio, Título adicional: tanque vertical aislado, Contenido total: 13600 l
Overview This crate packer (crater) for returnable glass bottles was manufactured in 1992 by German company KETTNER. The machine was operated until September 2025 in a returnable glass (RGB) line handling 330 ml bottles in 6×4 plastic crates at 2,500 crates per hour. It is still installed with energy disconnected, stopped since September 2025, available immediately, and can be visited on request. Technical data Capacity: 2,500 crates/hour Formats: 330 ml bottles Plastic crates 6×4 Application: Crating of returnable glass bottles Operating status: Stopped; energy disconnected
Depósito vertical de presión de acero inoxidable de 6 bar con extremos diestrados y diversos accesorios y equipos. Título adicional: depósito vertical de acero inoxidable, Volumen: 10560 l, Presión máxima: 6 bar de presión de prueba 7,8 bar, Temperatura máxima: 10 °C, Longitud: 1900 mm, Ancho: 1900 mm, Altura: 4770 mm, Material: acero inoxidable 1.4301 (AISI 304), Construcción de la base: tanque vertical con fondo y pies de tubería difundidos, Características: Boca de alcantarilla de carcasa, manguera de nivel, accesorios de tanque: muestreador, bola de pulverización, dispositivo de estanding, manómetro, válvula de seguridad, solapa de vacío
Depósitos verticales de presión de acero inoxidable, título adicional: Depósitos verticales de presión de acero inoxidable, Capacidad: 44070 l, Sobrepresión máxima: 3 bar, Longitud: 3100 mm, Ancho: 3100 mm, Altura: 6300 mm, Material: acero inoxidable 1.4541 (AISI 321), Posición: vertical
Tanques de presión horizontales de acero inoxidable con camisas de refrigeración, visores, tuberías de salida y manómetros. Título adicional: tanques de presión horizontales y refrigerables de acero inoxidable, Volumen: 1050 l, Sobrepresión máxima: 3 bar, Longitud: 2300 mm, Ancho: 860 mm, Altura: 860 mm, Material: acero inoxidable, Posición: horizontal, Características: camisa de refrigeración, tubería de salida DN50, vidrieras, manómetro
2 tanques de presión horizontales de acero inoxidable, cada uno equipado con bobina de refrigeración y lentes de mirado. Los tanques vienen con un bastidor para su instalación. Título adicional: depósitos de presión horizontales y refrigerables de acero inoxidable, Recipiente de volumen: 1200 l, Bobina de refrigeración de volumen: 4 l, Sobrepresión máxima: 3 bar, Temperatura de trabajo máxima: 30 °C, Longitud: 2700 mm, Ancho: 900 mm, Altura: 900 mm, Material: acero inoxidable 1.4301 (AISI 304), Posición: horizontal, Construcción de la base: cada uno sobre el marco de la silla, Características: bobina de refrigeración, gafas de visión
Resumen La línea de llenado para el embalaje con tapa de frontón fue fabricada en 2008 por la empresa noruega Elopak. Consta de un relleno de caja, un aplicador de tapones y un envasador. La línea de llenado sigue instalada, pero ya no está conectada. Sin embargo, puede inspeccionarse en persona. Detalles técnicos Capacidad: 8.000 cartones/h Formatos: 0,5l 0,75l 1,0l Horario de funcionamento: 32,500 Alcance de entrega Rellenador aséptico de cajas | Elopak | S-PS80HA | Aplicador de tapa 3x 2008 | Elopak | PLA-S30 | Empaquetador de bandejas 2009 | OYSTAR A+F | Traypacker TF | 2011
Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...
Este sistema de inspección de cajas vacías fue fabricado en 2019 por el fabricante alemán Indspect. La máquina está en producción hasta octubre de 2025. Datos técnicos Capacidad: ajustable para la inspección de cajas vacías dañadas
Storage tank with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets, Additional title: 2 vertical tanks, Total volume: 83 hl, Operating pressure: 0,9 bar, Operating temperature: 20 °C, Width: approx. 1800 mm, Height: approx. 4030 mm, Material: Stainless steel 1.4301, Position: vertical, Base construction: 4 x pipe feet, Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping
Tanque de fermentación con dos fondos hundidos. - 4 tanques con contenido de butto de 52 hl cada uno - 2 tanques con capacidad bruta de 79 hl cada uno, título adicional: tanques verticales de acero inoxidable, volumen total: 79 hl tanque de almacenamiento 2 piezas, Presión de funcionamiento: 0 bar, Temperatura de funcionamiento: 20 °C, Ancho: aprox. 1400 mm, Altura: aprox. 4100 mm, Material: acero inoxidable 1.4310, Posición: vertical, Construcción base: 4 x pies de tubería, ajustable en altura, Características: Hombreras laterales; tuberías CIP; Válvula de salida (válvula mariposa)
This hot water tank is a vertical, insulated stainless steel tank with an and . The tank is also equipped with a ( / ) and is ideal for applications where hot water is required at a constant pressure. The tank has an outlet pipe, a hose level indicator, and a pressure gauge for pressure monitoring. The robust construction and high-quality materials ensure long-lasting and reliable use in industrial environments. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, insulated, heatable stainless steel tank, Gross volume: 2000 l, Height: 2100 mm, Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304), Base construction: standing on 4 feet, Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicat ...
These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...
Sistema de tanques CIP compuesto por 3 tanques conectados por tuberías. El tanque más pequeño está dividido en 2 secciones. Título adicional: 3 contenedores rectangulares con conexiones de tubería, Posición: Vertical, Características: 2 grandes y 1 más pequeño, recipiente dividido, dimensiones: recipiente 1: L = 1,02 m, O = 1,02 m, H = 1,32 m: Recipiente 2: L = 1,02 m, O = 1,02 m, H = 1,32 m; vaso 3: sección 1: L = 0,69 m, W = 0,79 m, H = 1,28 m; sección 2: L = 0,3 m, W = 0,79 m, H = 1,28 m, Periferia: Los vasos reater están aislados
Un sistema completo de manipulación de malta y grano que comprende recepción de malta, preparación de la malta, almacenamiento de malta, molienda de grano y diversos sistemas de transporte. Título adicional: Manipulación de materias primas para malta y grano, Características: Recepción de malte, limpieza de malte: eliminación de polvo, despedazador, vibrador, almacenamiento: 4 maltsilos (3 x 25 t, 1 x 6 t), transportadores de tornillo de escama de malta (recepción), escamas de malta (retirada), Acondicionamiento, molino de 6 rodillos, cuerpo de fresado
- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...
