mandrinadoras y centros de mecanizado usadas para la venta (3,234)

x-travel:450 mmy-travel:450 mmz-travel:450 mmweight of the machine ca.:14 tsize of pallet:320 x 320 mmnumber of spindles:2 Double spindle 4-axis machining center Horizontal4 machine platesRenishaw probeControl Siemens Sinumerik 840DWorking space (X / Y / Z): 450x450x450 mmLoad pallet / table max .: 300 kgAcceleration: 10 m / s²Rapid traverse: 60 m / minPallet size: 320 x 320 mmChip-to-chip time: 2.6 sWorkpiece height max .: 700 mmTool holder: HSK 63Tool places: 2x 60Tool spindle: 10,000 rpm, 95 NmSpeed increase to 18,000 rpmInfrared receiver for probe,Make Renishaw Vaf72a0pTool magazine with 60 placesControl panel on the workstationControl panel on the tool installation siteWorkpiece positioning stations can be rotated manuallywith hydraulic workpiece clamping 60 barPneumatic support control on the workstationAutomatic swing gateExtended coolant layer 70 bar / 1500I /VF 250 Coolant Cool ...

x-travel:700 mmy-travel:550 mmz-travel:500 mmtool taper:SK40 spindle speed max.:12.000 U/minTool changer:30 fach electronic handwheel chip conveyor

x-travel:800 mmy-travel:840 mmz-travel:865 mmtotal power requirement:24 kWweight of the machine ca.:15,5 tdimensions of the machine ca.:4 x 3 m5 axes, 1 spindle A axis -30TO + 210 DEGB axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle: 29 KW max. spindle speed = 1200 rpmmax. torque = 34.6 Nm Tools:HSK-A63 87 places in the magazine

x-travel:500 mmy-travel:400 mmz-travel:330 mmcontrol:FANUC 31i B5 tool change unit:21 fachrapid traverse in x-y-z axis:54 m/mintaper ISO:BT 30 turning speed range::10.000 1 / minspindle drive:11 / 3,7 kWmax. table load:300 kgsurface area:600x 400 mmDimensions (L/W/H):1,6 x 2,1 x 2,25 mrapid traverse:48 m/mintotal power requirement:11 kVAweight of the machine ca.:2,1 tvertical CNC-milling-drilling machining center,Infrared Touch probe,el. handwheel,autom. door on right side,no internal Coolant Supply,Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

x-travel:800 mmy-travel:840 mmz-travel:865 mmcontrol:Siemens 840 D spindle speeds::10.000 rpmspindle drive motor:20 kWweight of the machine ca.:16 tdimensions of the machine ca.:4 x 3 m4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine

x-travel:1.250 mmy-travel:710 mmz-travel:710 mmtable surface area:1500 x 800 mmtable load capacity:800 kgturning speeds:12000 1/minspindle drive:15 / 10 kWcontrol:MILLPLUS iT HEIDENHAINspindle taper:SK 40 tool change unit:60 Pos.capacity:44 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:3,5 x 2,65 x 2,65 m5 axis simultaneously machining center,B-axis (-120° / +30°),NC-rotary-table integrated in rigid table,direct measuring system,3D probe infrared, HEIDENHAIN TS 640,internal coolant supply 40 bar, 600l,flushgun,chipconveyor,mode 4,3D quickset software (no hardware),Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D sl tool change unit:15 fachtaper ISO:BBT 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:22 kVAweight of the machine ca.:4,1 t3 axis simultaneously milling-drilling machining center,table 840 x 420mm,direct measuring system,airblast outside,NANO package (higher temperature stability),TROPICAL package (up to 50°C),PROGRESSline,BDE interface,el. handwheel,RENISHAW touch probe OMP 40-2table touch probe,prepared for handling-system incl. autom. door left site,prepared for hydr. interface,internal Coolant Supply 40bar, 400l,airblast,chipconveyor (dropping height 1.050mm,el. keysystem incl. key,Approx. machine on: 22.500h spindle on: 8.5 ...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,

x-travel:410 mmy-travel:610 mmz-travel:500 mmturning speeds:15000 1/mintool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mmtable load:100 kgtool change unit:48 Pos.total power requirement:35 kVAweight of the machine ca.:7,4 tdimensions of the machine ca.:4,15 x 3,8 x 3,28 m5-axis simultaneously machining center,NC-round-swivelling table, C-axis 360°, B-axis +30/-120°,chipconveyor,3D touchprobe,internal coolant supply 20bar,el. handwheel,kinematicsopt,meter readings:approx. 9.600h "machine on", approx.3.500h "spindle on"

x-travel:2300 mmy-travel:1200 mmz-travel:600 mmturning speeds:30-10.000 1/minmax. torque on the spindle:254 / 159 Nmcontrol:HEIDENHAIN TNC 430 tool taper:SK 40 tool change unit:60 Pos.spindle:40 / 25 kWfixed working table:surface area:1.100 x 1.100 mmrotary table:1.100 x 1.100 mmrapid traverse:30 m/mintotal power requirement:69 kVAweight of the machine ca.:20 tuniversal machining center with indexing head (2,5°),NC-rotary table, max. table load 1.500kg,internal coolant supply 30 bar, paper filter,el. handwheel,chipconveyor,automatic doors,flush gun,no touch probe available,approx. 81.400 h main swich onapprox. 72.200 h control onapprox. 26.700 h program running on machine under power , for functional testing

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:42.000 1/mintool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,laser,prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe),mode 4,oilmist suction,spindle chiller,no internal coolant supply,approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in totalmachine in good condition (test report available)

x-travel:1000 mmy-travel:610 mmz-travel:600 mmtable-size:1150 x 600 mmtable load capacity:1000 kgrapid traverse X- and Y-axis:24 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:10.000 1/minspindle drive:15/22,5 kWtool change unit:30 Pos.CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mmweight of the machine ca.:7 tdimensions of the machine ca.:3,2 x 2,2 x 2,7 mvertical machining center,- internal coolant supply 30 bar- chipconveyor- cartridge filter- flat tracks- el. handwheel- prepared for 4th axis- 3D touchprobe RENISHAW OMP 60- indirect measuring system- accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray)approx. 6.000h "spindle on"

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:8000 1/minweight:5,5 to.control:HEIDENHAIN iTNC 530 tool change unit:24 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWspace requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply,direct measuring system,prepared for 3D-touchprobe (without touchprobe),chioconveyorapprox. 21.200h "machine on", approx. 1.300h "spindle on"

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:12000 1/mincontrol:HEIDENHAIN iTNC 530 tool change unit:40 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWweight:6,8 to.space requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply 20bar,airblast through spindle,direct measuring system,prepared for 3D-touchprobe (M&H PS 25.00),chioconveyorNC-dividing device LEHMANN EA 520 L MA (center height 180mm)approx. 26.000h "machine on", approx. 7.500h "spindle on"

x-travel:2600 mmy-travel:1100 mmz-travel:900 mmtable surface area:3200 x 1100 mmrotary table diameter:1050 mmtable load:1,2 tcontrol:Heidenhain iTNC 530 ergoline 19" turning speeds:20 - 10.000 1/mintaper ISO:SK 50 max. torque on the spindle:288 / 187 Nmtool change unit:60 Pos.rapid traverse:40 m/minspindle:44 / 32 kWweight of the machine ca.:25 tdimensions of the machine ca.:6,70 x 3,40 x 2,95 m5-axis universal machining center,rigid table with integrated NC-rotary table left side and B-axis in milling head,direct measuring system,internal Coolant 40 bar, coolant tank 600 l,Swarf Conveyer Rotoclearairblast through spindle,3D Touch probe HEIDENHAIN TS 649,mode 4,new milling spindle in 2022 at 25.584happrox. 60.000 h machine ON, approx. 31.000 h Programm ON in total

travel:1300 mmlength:670 mmwidth:625 mmcontrol:Heidenhain TNC 620 spindle turning speed range:12000 1/mintable load:1300 kgtool change unit:40 Pos.spindle taper ISO:SK 40 spindle:17 / 10 kWdimensions of the machine ca.:3,35 x 2,60 x 3,10 mweight:8,5 t:40 kVArapid traverse:36 / 36 / 30 m/minvertical machining center,touch probe RENISHAW OMP 40-2,coolant tank 325 l / incl. 20 bar high pressure pump (internal coolant supply) air through spindle,el. handwheel,oil-mist suction,chipconveyor, flush gun,approx. 13.000h "machine on", approx. 3.000h "spindle on"inspection under power in factory is still possible

x-travel:8500 mmy-travel:2000 mmz-travel:1500 mmrapid travel x/y/z:25 m/mintable-size:10.000 x 1.350 mmtable load:max. 5 t/qmuniversal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/minpower capacity:37 kWmax. torque on the spindle:900 Nminternal coolant system feed:15 barcontrol:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KWdimensions of the machine ca.:12,7 x 5,2 x 4,6 mweight of the machine ca.:35 tuniversal travelling column - universal machining center,orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer)3D touch probe M&H 20.41,dividing wall for 2 table machining,internal air blast,15bar high pressure pump,prepared for HSC milling heads incl. torque support,moveable operator-cabin/panel,chipconveyor,handwheel HR 410,controlled security fence,miscellaneous accessories (angle ...

x-travel:710 mmy-travel:630 mmz-travel:500 mmturning speed range - spindle:5 - 5000 1/minpower - main spindle:11 kWtool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/minsurface area:1200 x 600 mmtable load:0,5 ttotal power requirement:15 kVAweight of the machine ca.:4,24 tToolchanger with 44 tools, pendant handwheel for easy setup.

x-travel:1400 mmy-travel:1200 mmz-travel:1350 mmcontrol:MSX- 701 Mapps III table surface area:800 x 800 mmrapid traverse:50 m/mintable rotating:360.000 x 0,001 B-Achse °table load:2,0 tnumbers of pallets:2 turning speed range:8000 1/minpower capacity - milling spindle:37 kWno. of tools in the magazine:60 Stücktool taper:HSK-A 100 weight:31 tdimensions:5,9 x 3,48 x 3,68 mEquipment:- Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping- Parts program memory 1 MB - Knoll 70 bar high pressure and filter system- Electrostatic oil dust collector LTA- elect. hand wheel- renishaw probe- abso- scale i X/Y/Z- axis- 5 free m- funktions- 48 extra off sets- dual ballscrews on X/Y/Z- axis

x-travel:560 mmy-travel:560 mmz-travel:660 mmcontrol:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/minspindle drive:25/ 35 kWmax. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mmTool diameter with no neighbouring tools:170 mmtool length - max.:450 mmweight of tools max.:12 kgnumbers of pallets:2 Pallet dimension:400 x 400 mmmax. workpiece diameter:630 mmworkpiece height max.:900 mmtable load:400 kgrapid travel x/y/z:60 m/minFeed x/y/z:60 m/mininternal coolant system feed:70 barweight of the machine ca.:8,5 tdimensions:3200 x 4800 x 2900 mmRenishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar.The machine has just received a new milling spindle.

x-travel:1530 mmy-travel:530 mmz-travel:465 mmside by side, right side fixed table X =:925 mmside by side left side 2 axis table X =:780 mmcontrol:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/minSpindle Torque:120 Nmpower capacity:22 kWFixed Table Dimensions:920 x 540 mmTable load fixed table:2000 kgMax. parts size on fixed table:900 x 500 x 400 mmDiameter of integrated 2-axis rotary table:650 mmTable load rotary table:500 kgB-axis swivel angle:-90°/+110° ° / degMax. parts size on rotary table:600 x 500 x 400 mmMax. Parts size over both tables:1500 x 500 x 400 mminternal coolant system feed:70 bar barweight of the machine ca.:10,5 tdimensions of the machine ca.:3,65 x 2,53 x 2,81 mpendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent con ...

table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 mTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

x-travel:2500 mmy-travel:1000 mmz-travel:750 mmtable surface area:3220 x 1000 mmWorkpiece weight approx.:3000 kgspindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/minfeed speeds:1- 30000 mm/minrapid traverse:30 m/mintotal power requirement:40 kWdimensions of the machine ca.:6,9 x 4,1 x 3,7 mweight of the machine ca.:21 twith CNC HEIDENHAIN TNC 42630-pockets autom. toolchangerRENISHAW measuring probecoolant attachment with TSC and chip conveyordiverse toolholders

x-travel:3000 mmy-travel:1000 mmz-travel:1200/1300 mmspindle motor:32 kWspindle taper: ISO:50 spindle turning speed range:20 - 8000 U/minfeed range:1-30000 mm/minrapid traverse feeds:30 m/mintotal power requirement:80 kW

x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

A la venta es una robusta y de alta calidad MAXION bench drill BTB 18 STP en diseño industrial. La máquina es ideal para: • Trabajo en metal • Taller y cerrajería • Formación y fabricación • Trabajo de perforación preciso Equipamiento: • Ajuste de velocidad sin escalones o accionado por correa (típico en la serie BTB) • Mesa de perforación estable • Tornillo de banco mecánico • Interruptor de parada de emergencia • Bastidor base industrial • Fabricado en Alemania Las máquinas MAXION son conocidas por su alta precisión y durabilidad. ⸻ Auction-ID: A1-44641-16

Auction-ID: A1-43823-130

: gebraucht : 2017 : 3901 : China : 8490 €: 1 : 6790 €: 32 mm: MK 4 : 300 - 1.000 mm: 32 - 2.500 (16) U/min: 1760 mm: 800 mm: 2080 mm: 1600 kg: 530 - 1.000 mm: 2.2 kW: 240 mm: 250 mm: 0,75 kW: 0,10 - 1,25 (8) mm/Ubox table 600 x 455 x 455 mmcoolant equipmentmachine lampmechanical clamping for height adjustment and spindle stockelectr. clamping for arm rotationmachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1995 €: 25 mm: 19 mm Weldon : 1.6 kW: M20 : 266 mm: 259 mm: 505 mm: 18 kg: 25 mm: 70 mm: 75 mm: 190 mm: 120-190 / 290-450 U/min: 8 mmThe PRO-72T drilling machine is suitable for hole cutting and tapping applications.Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”).Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steelgrade or tool type.Intelligent speed control system maintains constant motor speed regardless of changing loads.Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.Features and benefits:• powerful motor with heavy duty 2-speed gearbox• Electro ...