Производитель:
(Категория: 706)
Обзор Эта полуавтоматическая мойка кегов была произведена в 2020 году итальянской компанией SIFA. Idrokeg 21 оснащён двумя чистящими головками и предназначен для эффективной мытья кегов с паровым отоплением. С ёмкостью до 12 кегов в час она подходит для небольших и средних пивоварен. Устройство находится в очень хорошем состоянии, готово к немедленному использованию и оснащено отдельными баками, насосами и функциями очистки. Технические данные Ёмкость: 12 кегов в час Станции очистки: 2 Отоплени ...
Overview This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available. Technical details Filling volume range: 20-300 ml Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production) Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 % Production speeds: Products with 300 ml content ≥15 bottles/minute, Products with 200 ml content ≥20 bottles/minute, Products with 100 ml content ≥35 bottles/minute, Products containing 50 ml ≥40 bottles/minute. (All figures are based o ...
Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line
Система варки оснащена чайником сусла на 470 л и 500-литровым лаутерным тюном. Отопление электрическое с мощностью 21 кВт. Отопление осуществляется в стенах и полу Заказал. Урожайность пивоварни — максимум 74%. Исходная гравитация может быть заварена до 18 градусов платона . Двухсосудная пивоварня, состоящая из комбинации затирания и сусла и Lauter tun/гидромассажный сосуд. Под заторным тюном находится высокоэффективный насос, с которым сусло смешивается и передаётся между устройствами с по ...
Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...
Обзор Следующий двухкомпонентный миксер был построен в 2000 году немецким производителем Krones. Машина доступна сразу в своем нынешнем хорошем состоянии. Техническая ёмкость 45 000 л/ч 2 компонента Anton Paar денсиметр, подходящий для газированных напитков, год производства: 2000 SIEMENS Контрол
Может ли заполнение линии CFT Ёмкость: 12 000 c/ч Год производства: 2017 размер банки: 150 мл Slim line / 200 ml Slim line / 330 ml Стандарт Размер крышки: 200 и 202 Продукты для наполнения: газированная вода и напитки Включающий: 1. Депаллетизатор КФТ типа 101 2. Тип заполнителя банок: Master-Can Tronic RS24/4 с 24 клапанами для заполнения 3. Кан-симер CFT 3000/4 с четырьмя швовыми головками 4. Обмотка упаковщика консервов SMI Упаковать банки 2x2 и 2x3 5. Может уменьшаться упаковщик с помощью SMI в лотках Упаковать банки 4x3 ...
Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging
Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...
Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.
Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts
Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available
Обзор Этот депаллетизатор для стеклянных бутылок был произведён в 2006 году итальянской компанией MAS PACK. В настоящее время машина находится в производстве до конца июля 2026 года и является частью линии по розливу вина. Посещения возможны по запросу. Машина хорошо обслуживается. Технические данные Мощность: до 7 200 b/ph Применение: стеклянные бутылки Форматы: 37,5 cl Bourgogne 75 cl Bourgogne 1,5 л Magnum Источник питания: 5 кВт Подача воздуха: 150 л/ми
Overview The pallet wrapper was built in 2007 by Italian manufacturer Robopac. The machine was used in a water and CSD production plant where it was part of a PET filling line with a capacity of 27,000 bph. The pallet wrapper was professionally dismantled and requires technical maintenance. Technical details Capacity: about 60 pallets by 23 wraps Working hours: 45 363 Pallet top cover function + Upper pressing unit Scope of delivery Pallet wrapper Belts, rollers Sensors on conveyor belts (infeed, outfeed, diagonal). Spare parts (new and used) Documents
Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...
Overview This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data Air operating pressure: 5.5 – 8.5 bar Water operating pressure: 3 – 5 bar Condensate operating pressure: up to 10 bar Operating temperature: 4 – 70 °C
Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...
Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing. The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as ...
Overview This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise bottle infeed/outfeed parallel on one side of the machine
Обзор Наполнитель был построен в 2007 году немецкой компанией Krones. Машина регулярно обслуживается, всё ещё собирается и может быть осмотрена в любое время. Технические характеристики Выход: 40 000 bph (200 мл) Форматы: стеклянная бутылка объёмом 200 мл Стеклянная бутылка 237 мл Закрывка: коронка Направление потока: по часовой стрелке Высота входа/выхода: 1 150 мм +- 50 мм Точки заправки: 96 Точки закрыва: 15 Диаметр круга тангажа: 2 880 мм Шаг: 94 мм Система управления: Siemens S7 Энергопотребление: 15,17 кВ
Полная линия розлива CSD ПЭТ – 12 400 BPH Выпуск: 2008–2009 | Местоположение: Германия | Доступно: октябрь 2026 Эта полная линия розлива ПЭТ CSD (газированные безалкогольные напитки) разработана для эффективного и надёжного производства газированных напитков. Линейка состоит из высококачественного европейского оборудования ведущих производителей, таких как SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac и TwinPak. Система в настоящее время продолжает производство, обеспечивая отличное рабочее состояние и не ...
Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V
Обзор Машина была построена в 2008 году бывшим производителем SIG Corpoplast (ныне KHS). Машина всё ещё работает и может быть осмотрена в любое время. Технические данные Ёмкость: последняя скорость 21,115 b/h (при 1,5 л) Форматы: 500 мл, 750 мл, 1,000 мл, 1,500 мл PCO 1881 Рабочее напряжение: 400 В/50 Гц Управляющее напряжение: 24 В постоянного тока Область доставки Аппарат для формовки с выдувкой | SIG Corpoplast | BLOMAX 12 | Фидер Preform 2008 года | Transver AG | - | Сортировочный желоб силоса 2008 год
Overview This chamber pasteurizer was manufactured in 1996 by German company JOHA (Johannes Arno Hartenstein). According to available documentation, the machine was acquired in 2021 as a unit described as overhauled and partially renewed, and the control system was renewed in 2020. The machine is immediately available and can be viewed in person. Technical data Type: Chamber pasteurizer Heating: Steam Capacity / Content: Total chamber volume: approx. 10.3 m³ Net usable volume: approx. 5,850 L Electrical connection: 230 / 400 V, 50 Hz Installed power: approx. 5.2 kW Current: approx. 10.5 A Fuse: 3 × 35 A (slow-blow) Protection class: IP54 Steam connection: DN 80 Condensate connection: DN 50 Max. steam pressure: approx. 0.2 bar Steam consumption: approx. 300 kg/h Noise level: < 70 dB(A)
Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) ...
Полная линия наполнения ПЭТ – Krones AG ERGOBLOC – 1,5 л – 32 000 BPH – негазированные продукты – ЙОМ 2006 На продажу представлена полная линия разлива и упаковки ПЭТ для негазированных вод и негазированных напитков, построенная на базе системы Krones ERGOBLOC. Линия имеет пропускную способность до 32 000 бутылок в час (BPH) для 1,5-литровых ПЭТ-бутылок с крышками диаметром 28 мм или 32 мм. Оборудование подходит только для негазированной воды и других негазированных напитков. Линия включает полный процесс — от п ...
Полная линия стекла для горячей и холодной наполнения (Krones / KHS) Ёмкость: до 33 000 бутылок в час (стеклянные бутылки объёмом 500 мл) YOM: 1999-2007 — много улучшений, см. ниже! Система обеспечивает максимальную гибкость, позволяя наполнить горячую, холодную наполнение, газированные и газированные напитки, а также использовать несколько размеров бутылок. Важно: Наполнитель также может использоваться для ПЭТ-бутылок, что обеспечивает дополнительную гибкость в производстве. Ключевые технич ...
ЛИНИЯ ПАСТЕРИЗАЦИИ И РАЗЛИВА ПОДЕРЖАННОГО СВЕЖЕГО МОЛОКА Включающий: Сепаратор молочных сливок Производство: Сейтал Модель: SE13X Ёмкость: 2500 л/ч Год изготовления: 1993 Пластинчатый теплообменник — флэш-пастер — Марка: KMA Модель: K21-FS/4273 Вместимость: 2500 л молока от 8°C до 75°C Год изготовления: 1998 Центробежный насос Марка: Südmo Ручной и пневматический дисковый клапан, аматуры, манометр, датчик давления и др. Гомогенизатор Создатель: Ниро Соави Модель: NS 3018-H Ёмкость: 2500 л/ч Год изг ...
BEVMAQ GmbH
