Производитель:
(Категория: 706)
Стрейч-обёртка Robopac типа Helix HS40 с поворотным рычагом Вместимость: 45–50 паллет/час Напряжение: 400 В Возможен верхний лист аппликатора Доставка без транспортировки поддонов и защитного корпуса
Размеры: - Ширина: 1500 мм - Глубина: 1500 мм - Высота: 2400 мм (без основания) Оборудование: - Прямоугольный люк 320 x 420 мм - Оставшийся дренаж NW40, Фредрих - Очищающий канал NW40, Фредрих - Выборка - Стенд-дисплей - Верхняя дверь 320 x 420 мм - Подключение для вентиляции
Размеры: - Ширина: 1750 мм - Глубина: 1500 мм - Высота: 2400 мм (без основания) Оборудование: - Прямоугольный люк 320 x 420 мм - Оставшийся дренаж NW40, Фредрих - Очищающий канал NW40, Фредрих - Выборка - Стенд-дисплей - Верхняя дверь 320 x 420 мм - Подключение для вентиляции
Размеры: - Ширина: 1750 мм - Глубина: 1500 мм - Высота: 2400 мм (без основания) Оборудование: - Овальный люк - Оставшийся дренаж NW40, Фредрих - Очищающий канал NW40, Фредрих - Выборка - Стенд-дисплей - Подключение для вентиляции
Overview This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...
Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 N ...
Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors Pneumatic do ...
Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor. Bottle format ...
Обзор Этот распаковщик для бутылок был изготовлен в 1982 году немецкой компанией Joha. Машина входила в состав линии разлива с мощностью 2500 bph и сейчас доступна. Технические данные Ёмкость: часть линии с мощностью 2 500 bph Форматы: подготовлено для 0,33 л Длинная головка для распаковки: упаковочная головка на 24 бутылки в модульном ящик
Overview This 40-foot refrigerated container was manufactured in January 2019 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container shows minimal damage and was last serviced in December 2021. The unit works perfectly and the interior is illuminated. The container is easy to clean thanks to the Easy Clean Paint. Technical details Year of construction: 01/2019 Maximum load capacity: 29,560 kg Tare weight: 4,440 kg Cooling range: -30°C to +30°C Coolant: R 134a Power connection: 32 A heavy current Last maintenance of the cooling system: 12/2021 Interior lighting Easy cleaning with Easy Clean Paint
Обзор Изобарометрический наполнитель Meheen M6 от американского производителя Wild Goose был построен в 2020 году. Машина использовалась очень мало. Технические детали Ёмкость: до 2,160 бутылок в час Количество головок наполнения: 6 Последние использованные форматы: 0,33 л Длинный горлышко Возможный диаметр бутылки: 5,3 см - 7,6 см Размеры (пол): 1680 мм x 1070 мм
Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surfa ...
Обзор Этот пастеризатор для камеры был произведён в 2020 году немецкой компанией RICO. Машина предназначена для процессов пастеризации и ранее эксплуатировалась на пивоварне. Оборудование больше не требуется продавцу и может быть доступно в любое время по запросу. Технические данные Применение: Пастеризация Конфигурация: камерный пастеризатор 4x1, внутренняя установк
Overview This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system
Overview This shrink-wrapper was manufactured in 2013 by the Italian company OCME S.p.A.. The Vega HT 60/2 SE is a versatile film packer designed for wrapping PET, glass, or can containers into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a running line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides for square bottles and an optional bottle divider. A semi-automatic roll-lifting robot for film roll changes is also included. Optional outfeed conveyors can be provided on request. Technical data Formats: From 0.25 L to 2.5 L; currently 1.5 L in 2×(3×2) packs Container types: PET, glass, and cans Application: All beverages and liquid products Machine configuration ...
Overview This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to ...
Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...
Обзор Компрессор SE 68 B был произведён бельгийской компанией Ateliers François S.A. в 2010 году. Её использовала крупная европейская контрактная бутылярная компания до демонтажа. Сейчас он находится в нашем складе в Германии. Технические данные Свободная подача воздуха: 2500 м³/ч (43,3 м³/мин) Рабочее давление: 40 бар Скорость об/мин: 498 Мощность: 450 кВт Тип установки: Установка на заносах с антивибрационными креплениями Объем доставки 1 × Компрессор высокого давления 40 бар | Ateliers François 1 × Хладильная сушилка ...
Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)
Обзор Эта капсульная машина была произведена компанией CIRIO GERMANO в 2014 году. Машина имеет 6 головок и предназначена для обработки термоусадочных капсул. Технические детали Производитель: CIRIO GERMANO Модель: MONOBLOCCO 6 TERMICHE Год производства: 2014 Серийный номер: 14-018 Количество головок: 6 Тип капсул: ПВХ-усадочные капсулы Функция: Автоматическая подача капсул и термическая усадк
Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functio ...
Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200 x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup
Overview This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors
Обзор Этот 5-галлонный наполнитель для бутылки воды был построен в 2003 году с использованием проверенной технологии американским производителем Steelhead. Машина уже разобрана, хранится на хранении и может быть просмотрена лично. Техн. Подробная мощность: 600 bph
Обзор Эта мойка для ящиков была произведена в 1997 году немецкой компанией Klann. Модель 1800 N — это однованная система мытья ящиков для напитков различных размеров с производительностью до 2000 ящиков в час. Он всё ещё установлен и сразу доступен. Технические данные Ёмкость: 2000 ящиков в час (для ящиков GDB, по длине) Форматы ящиков: 12 × ящиков по 0,7 л (вдоль) Ванны: 1 Конструкция: нержавеющая сталь Длина (всего): 4 640 мм Ширина: 1 300 мм Электрическое соединение: 16 кВт Извлечение паро
Инъекция высокого давления для вашего наполнителя Между выходом наполнителя и входом корковой корки По сути, состоящий из: - Насос высокого давления, включая раму - Отопление и клапаны - Приклад сопла - Электрический шкаф управления - Давление в баке Техническое описание, включая фотографии, можно найти в приложении к предложению.
Overview This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time. Technical Details Capacity 28,800 bottles per hour 1,200 crates per hour Recently processed parameters Bottle dimensions 500ml Outer diameter: 65,50mm Total height: 206,30mm Crates Formation 6x4 Length crate: 400mm Width crate: 300mm Height: 255mm Box inlet direction: transverse Electrcial connection: 400/ 230V, 50Hz, 15 A
Страсбургская служба маркировки SES-120-II — горячая маркировка для квадратных и круглых контейнеров, рассчитанная на карманные бутылки объёмом 0,1 лтр, 0,25 литра и 0,5 литра и т.д., для квадратных контейнеров с двумя этикетками или для круглых контейнеров с одной этикеткой, выход до 4 000 единиц в час, работала до конца... проходил всего 10 раз в го
Обзор Мойка для ящиков Kettner, типа WAH 26, была произведена в 1992 году. С мощностью до 2600 ящиков в час, он подходит для использования в существующих линиях заправки для очистки ящиков для напитков. Технические характеристики Производитель: Kettner - Sotec GmbH Модель: WAH 26 Год производства: 1992 Вместимость: 2 600 ящиков в ча
Overview This atmospheric semi-automatic can filler from the brand Cask, 2019, is for sale because the owner is closing the business. It is still operational and can be inspected in person. Technical Details 600 cans/hour 2 filling heads CO₂ pre-purge Canning table Formats Slim 163 mL 187 mL 250 mL Sleek 250 mL 355 mL Standard 250 mL 330 mL 355 mL 375 mL 440 mL 473 mL 500 mL Dimensions Length [mm]: 1530 Height [mm]: 2008 Depth [mm]: 646 Power supply: 240 VAC, 50 Hz Scope of delivery includes FIAC SUPER SILENT 59 air compressor (required for lid sealer), 8 bar
Kahl & Schlichterle
