Fabricante:
(Categoria: 107)
sheet width: 3050 mmplate thickness: 4 mmweight of the machine ca.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 1,7 mmroll diameter: 50 mmDimensions (L/W/H): 1600 x 600 x 1500 mmweight of the machine ca.: 400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: tplate thickness: mmno. of strokes: Hub/mintotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4 mmcutting angle adjustment: 30-120 °table height: 900 mm: 407 weight of the machine ca.: 760 kgdimensions of the machine ca.: 1300x1000x1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg
sheet width: 4200 mmplate thickness: 14 mmpre-bending: 10 mmroll diam. toproll: 340 mmroll diam. bottom roll: 310 mmspeed: - m/minControl: Davi CNC total power requirement: - kWweight of the machine ca.: 11 tdimensions of the machine ca.: 6,5 x 1,75 x 1,65 m- DAVI CNC control- pre-Bending- Hydraulic 4-roller drive- Side roll diameter: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3120 mmdown holder: 14 Stückcutting angle: 1°5 no. of strokes: 14 Hub/mincontrol: ENC 100 table width: 500 mmwork height max.: 880 mmoil volume: 170 ltr.total power requirement: 11.0 KWweight: 5550 kgrange L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro----------------------------------------------------Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front----------------------------------------------------Equipment:- electro-hydraulic guillotine shears swing cut- with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Retraction from backgauge on/ ...
x-travel: 4216,0 mmy-travel: 2007,0 mmz-travel: 305,0 mmcontrol: CNC table-size: 4902,0 x 2134,0 mmmax. workpiece weight: 1465 kg / m²machine weight ab.: 2500 kgtotal power requirement: 30 kWdimensions of the machine ca.: 5486,0 x 3708,0 mmThe compact waterjet cutting system in bridge design consists of a torsion-resistanttorsion-resistant steel construction, which is coated with a special durable anti-corrosion coating.coating. Both the two X-axes and the particularly high Y-axis are based on theY-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system.specially developed by OMAX for the special requirements of a waterjet cutting system.Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pi ...
tube diameter: 42.0 x 3.0 STAHL mmtube diameter: 30.0 x 2.0 EDELST mmbending angle max.: 180 °bending radius max.: 100 mmbending speed: 2.0 U/min.Control: NC voltage: 400 Vtotal power requirement: 0.55 kWweight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine baseDescription:- NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored- Automatically returns to the starting position- Maximum bending capacity for 42 x 3.0 mm steel tubes- Excellent bending quality with very tight bending radii (from 2x tube diameter). and bending angles between 0° and 180°- Easy operation- High accuracy and reliability- Quick tool change (within seconds)- Easy to transport- Includes machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 60.3 x 4.5 mm STtube diameter: 60.3 x 5.4 mm ALUtube diameter: 2 x 3.91 mm GASbar material - diameter: 35.0 mmrevolutions per minute: 2.0 U/minbending radius min.: 10.0 mmbending radius max.: 270 mmexternal diameter: min. 5.0 mmexternal diameter: min. 1/8 Zollvoltage: 230 Vtotal power requirement: 1.5 kWweight: 76.0 kgrange L-W-H: 302 x 243 x 674 mmEquipment:- mandrel-less tube bending machine- Model M = ELECTRO-HYDRAULIC SINGLE-PHASE- high performance and compact design- completely hydraulic machine- bends 210° without the need to catch up- no electronic control- Ercolina patent n. 102017000142179- control of the bending angle via adjustable angle scale- mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 6.0 mm STpre-bending: 4.0 mm STdiameter of upper rolls: 200 mmside roll diameter: 165 mmdiameter of lower rolls: 190 mmbending speed: ca. 5.0 m/minControl: DIGI oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 6.0 kWweight: 6000 kgrange L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on requestFeatures:- Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options- MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks- Two central rolls are driven directly by hydraulic motors- Conical rolling possible via inclined position of the rolls- Parallelism of the side rollers via torsion shafts- Bending on both sides- Diameters of up to 1.1 times the upper roller ...
table length: 3048 mmtable width: 1524 mmburner heads: 1 stroke: 270 mmspeed: 100 m/mindimensions: 8900 x 2260 x 2220 mmweight of the machine ca.: 7.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working pressure: 300 bartotal power requirement: / kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: - tstroke: - mmtable-size: - mmtotal power requirement: - kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: - m: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmdown holder: 14 Stückno. of strokes: max. 11 Hub/mincutting angle: 1°15 work height max.: 770 mmcolumn arm: ? mmoil volume: 300 ltr.control: konv. total power requirement: 15.0 kWweight: 11800 kgrange L-W-H: 4255 x 2250 x 2400 mmFeatures:- Robust electro-hydraulic swing pruning shears- Operation, swivels to the front left- Electro-motorized backgauge on recirculating ball screws Movement by push-button (forwards backwards) including ELGO digital position indicator- Manual quick cutting gap adjustment by eccentric (right side stand)- Machine stand with overhang- 1x long side stop, with mm scale- 2x front support arms, with mm scale- Ball rollers in the front support table- Hinged front finger guard- 1x free-moving foot switch- Rear safety device (protective grille)- 2x front emergency stop button- Operating instr ...
pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmdayligth: 320 - 560 mmstroke: 240 mmworking feed: 10.0 mm/secreturn speed: 150 mm/seccolumn arm: 400 mmwork height max.: 1050 mmcontrol: DNC 1200 PS/B operating pressure: max. 297 barcompressed air: 4.5 - 6.0 barconnected load: 15.0 kWoil volume: 250 ltr.weight: 11500 kgrange L-W-H: 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing- in checked conditions - machine Video -https://www.youtube.com/watch?v=z-Bxibk_8uEFeatures:- CNC Electro-Hydraulic Press Brake- CYBELEC CNC Control Model DNC 1200 PS/B Swiveling Control Panel, Front Right Numerical Programming Tool & Program Library- CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning- CNC Electro-Motorized Backgauge (X-Axis) with 3x Manually Adjustable Backgauge Fingers (Z-Axis) Maximum Travel Speed: 250 mm/sec- CNC electro-motorized height ...
table length: 4000 mmtable width: 2000 mmburner heads: 1 laser capacity in Watt: 4 kWCapacity steel: mmControl: MicroStep total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- Working area: 4000 x 2000 mm + additional space for pipe cutting- Linear guides: Rexroth- Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes- Gearbox: STOBER- Drives: Maintenance-free, processor-controlled AC servos from Panasonic- Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously).Acceleration 10 m/s²Positioning speed of the Z-axis 50 m/minTravel distance of the Z-axis 150 mmAcceleration of the Z-axis 0.75 GPosition deviation Pa 0.07 mm according to VDI/DGQ 3441Repeatability Ps 0.03 mm according to VDI/DGQ 3441Ambient temperature: +10 °C to +35 °CRelative humidity: 0 to 90%Machine in very good condition, re ...
material width: 250 mmmaterial thickness: 2 mmdiameter: 1200 mmtotal power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 33 mmsquare edge steel: 30 mmL-beam: 60 x 8 mmhole diameter in sheet thickness: 20 in 13 mmhole punhing press: pressure: 35 thole punching press: throat: 320 mmhole punching press: max. length of stroke: 24 mmhole punching press: capacity (dia. x thick.): 30 x 9 mmhole punching press: capacity (dia. x thick.): 20 x 13 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,5 x 0,7 x 1,8 mProfile steel shear with:- Hole punch- Notcher- Foot switch- Machine light- Mounted on a trolleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 200 mmstroke: 100 mmdayligth: 308 mmajustment speed: 150 mm/secworking feed: 1-10 mm/secreturn speed: 100 mm/sectable width: 100 mmtable height: 900 mmcontrol: DNC 60 PS oil volume: 100 lvoltage: 400 Vtotal power requirement: 5.5 kWweight of the machine ca.: 2750 kgEquipment:- CNC electro-hydraulic press brake- CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library- CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws- CNC controlled axes Y1 - Y2 - X- Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder- 4V universal die block with 60 mm die shoe- 2x sliding material/support arms (Sliding System)- BOSCH/HOERBIGER hydraulic system- SIEMENS ...
sheet width: 1270 mmplate thickness: 2,0 mmdistance between columns: 1295 mmdaylight opening: 46 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,8 x 1,2 mSegment bending machine, new.Segment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270 mm.Including material stop, max 660mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mmplate thickness: 4 mmdistance between columns: 1100 mmdiameter of upper rolls: 110 mmtotal power requirement: 5,0 KWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 0,9 x 1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mmplate thickness: 9.0 / 10,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 190 mmpre-bending capacity: 9,0 mmconnected load: 5,3 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mmFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustable stop fingers- 1x split set of deer foot tools - top- 1x split set of Multi V tools ...
: 300 kNstroke length max.: 235 mm: 200x24 mmbending capacity max. - round: 60x4,0 mmtoolpiece height max.: 250 mm: 660x1250 mmwork height max.: 900 mmreturn speed: 20 mm/secworking feed: 10 mm/sectotal power requirement: 3 kWweight: 950 kgDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalEquipment:- Stamp, smallest U = 145 mm 85 ° H = 250 mm, R = 5 mm- Quick change Monomatrize 85 ° H = 250 mm, V = 63 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3050 mm: 15-1000 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 30 kWweight of the machine ca.: 14,.5 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting angle adjustment- Cutting length adjustment- Cutting length limitation (time dependent)- Sheet thickness adjustment- Back gauge with clearance function- Cutting line lighting- Side stop- 3 pcs. support consoles- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tchamfer lenght: 4100 mmdistance between columns: 3700 mmcolumn arm: 415 mmstroke: max. 215 mmdayligth: 410 mmajustment speed: 200 mm/secworking feed: 10.0 mm/secreturn speed: 150 mm/secwork height max.: 1080 mmtable width: 100 mmControl: CYBELEC oil volume: 160 ltr.voltage: 400 Vpower capacity: 8.5 kWweight: 10200 kgrange L-W-H: 4800 x 1800 x 2600 mmEquipment:- BEYELER electro-hydraulic CNC press brake- CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right- CNC-controlled axes (Y1+Y2-X)- CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping- Manual lower tool clamping- Rear safety device (safety door)- Side safety device (safety doors)- Bending tools 1x set of split upper tools (ROLLERI TOP 175.26.R0 ...
pressure: tplate thickness: 5 mmsheet width: 40 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: - mmthroat: - mmdistance between roll centers: - total power requirement: - kWweight of the machine ca.: 160 kgdimensions of the machine ca.: - mNo accessories For rolling beadsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
