Fabricante:
(Categoria: 104)
Dimensions (L/W/H): 1240x950x1650 mmWeight: 435 kgTotal power requirement: 4,65 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1100xx750x1380 mmWeight: 450 kgTotal power requirement: 0,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4650x2230x2135 mmWeight: 5800 kgTotal power requirement: 19,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3120x1100x1600 mmWeight: 2000 kgTotal power requirement: 6,4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4600x1000x1550 mmWeight: 2500 kgTotal power requirement: 8,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1800x930x1500 mmWeight: 700 kgTotal power requirement: 1,65 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5600x1000x1550 mmWeight: 2500 kgTotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mmgrinding width: 400 mmworkpiece height: 500 mmtotal power requirement: 10 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel dia. x width: ca. 200 x 25 mmmagnetic clamping plate: ca. 450 x 170 mmcross feed of the table: 200 mmrevolutions of grinding spindle: 3000 U/mingrinding wheel hole diameter: 51 mmweight: ca. 1300 kg: 0,001 - 0,013 mmgrinding length: 600 mmSurface grinding machineIncludes extractor1 additional grinding wheel holderMachine was in occasional use until recentlyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1000 mmgrinding width: 750 mmworkpiece height: 700 mmControl: SIEMENS, SIMATIC S 7-1500 table surface area: 1050 x 640 mmtable height over floor: 1000 mmtable speeds: 3.000 - 30.000 mm/mincross feed of table continual: 5 - 5.000 mm/mincross feed of table intermittent: 0,1 - 65,0 mmvertical adjustment, 1 graduation: 0,002 mmrapid traverse vertical: 0,25 m/mingrinding spindle speed: 50 - 2.500 U/mingrinding wheel size: ø 400 x 50 x ø 127 mmworkpiece weight: max. 1.000 kgtable load: max. 1600 kgtotal power requirement: 33,2 kWweight of the machine ca.: 9,3 tdimensions of machine L x W x H: 4,50 x 2,37 x 2,65 m- complete electronic / electric renewed in 2018Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dia. of draw-in collets: 4 - 24 mmmax. radius to grind: 12 mmgrinding range: 4 - 24 mmgrinding wheel-diameter: 100 mmtotal power requirement: 0,4 kWweight of the machine ca.: 100 kgdimensions of the machine ca.: 1 x 0,6 x 0,4 mFunction: ready for operation: Electric 380 Volt: Base with drawer: Diverse collets: Draw-off device: Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: mmgrinding width: mmworkpiece weight: kgworkpiece height: mmtotal power requirement: 22 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mQ U O T A T I O NWe are pleased to offer you ex our stock, subject to prior sale, and error in technical data :DISKUSDouble Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cyclemodel DDS 600 RAMyear 1972 / 2002 modernized Serial no 6967 _____________________________________________________________Grinding wheels Ø, each 600 mmGrinding wheels bore x height, approx. 75 / 150 mmGrinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s)Grinding spindle drive, each 30 kWWorkpiece dimensions:Grinding width (or workpiece diameter) approx. 20 - 120 mmGrinding (workpiece) height max ...
grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 260 mmgrinding wheel dia. x width: 500x80 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 6000 mmgrinding width: 2200 mmworkpiece height: 2000 mmcolumn daylight: mmtable surface area: 6000 x 2200 mmtable speed -stepless-: 2 - 50 m/minworkpiece weight: 15 tadjustment speed of cross-rail: 560 mm/mingrind. wheel dimensions for face grinding: 63...200 mmgrind. wheel dimensions for peripheral grind.: 315x50x76 mmgrind. wheel dimensions for peripheral grind.: 400x40x127 mmadjustment range - horizontal: 500 mmswival range +/-: 60 °total power requirement: 86 kWtotal wight: 130 tdimensions of the machine ca.: 22x7x4 mweight of the machine ca.: 56 t- Digital Read OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 7500 mmgrinding width: 1400 mmworkpiece height: 1700 mmcolumn daylight: 1850 mmtable surface area: 7705 x 1250 mmworkpiece weight: 15 ttable speed -stepless-: - m/mingrinding motor: - kWturning speeds: - U/mintotal power requirement: - kWweight of the machine ca.: 72 tdimensions of the machine ca.: - mMachine is equipped with:- Double grinding head-- Grinding wheel on the right and left of the main spindle-- Each side can be swivelled through 90°-- Thanks to the special grinding head, there is no need to change or profile the grinding wheel when prism or V-groove grinding- Separate underhand grinding support- Automatic grinding wheel dressingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 200 mmgrinding length: 450 mmworkpiece length: / mmworkpiece height: 220 mmtotal power requirement: 1,14 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,7 x 1,6 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Siemens 840 Dweight of the machine ca.: 13,5 tdimensions of the machine ca.: 7m x 4m x 2,75m mAccessories:Coolant tankGrinding wheelsVarious spare partsOperating and maintenance instructionsCE conformityDimensions: 7x4x2.75 m ( LxWxH)TECHNICAL DATA:Workpiece data:max. outer diameter: 250 mmwith max. grinding wheels Ø 450 mmmax. diameter to be machined over table: 375 mmProfile depth for dressable grinding wheels: 40 mmmax. workpiece length: 3,600 mmmax. distance between centers (1): 2,800 mmmax. bevel angle: +/- 90°Number of teeth of the workpiece: 1 - 999max. weight of the workpiece: 250 kgWorking area:Center distance between workpiece and tool spindle: 355-170 mmRadial travel: 185 mmAxial travel: 3,000 mmSwivel angle: +/- 90°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1000 mmgrinding length: 8000 mmswing diameter: 1200 mmcentre height: 600 mmmax. workpiece weight between centres: 10000 kgworkpiece weight max.: 20000 kgworkpiece turning speeds: 5 - 60 U/mingrinding slide speed stepless: 22 - 2240 mm/minrapid travel - grinding head longitudinal: 3500 mm/minturning speed range - grinding spindle: 450 - 1610 U/mingrinding wheel size: 425 /710 x 63 x 305 mmtailstock adjustment: max. 6000 mmworkpiece-drive: 20 kWgrinding motor: 30 kWcrowning with reference to bobbin radius: 0,01 - 1,5 mmtotal power requirement: 85 kWweight of the machine ca.: 35,4 tdimensions of the machine ca.: 13,1 x 3,3 x 2,35 mRoller grinding machine with movable grinding spindle carriage- Hollow and crown grinding device- Telescopic covers- Coolant system- Position tolerance 0.005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm: 300 mm: 382 mm: 700x340 mm: 355x38x127 mm: 1500 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm: 300 mm: 382 mm: 700x340 mm: 355x38x127 mm: 2400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 415 l0: 280 mmweight of the machine ca.: 1,5 ttotal power requirement: kWdimensions of the machine ca.: mcharge load: : for excavatemachine without flywheel drive motor and frequenzy regulatorgross working tank volume: 600 litersuseful volume: 415 literslargest possible workpiece dimension (measured diagonally): 280mmtotal weight: 1140kgdrive power at 1500 rpm: 4kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 300 mmworkpiece weight: 999 kgworkpiece height: 999 mmgrinding length: mmgrinding width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAusstattung:-Digitalanzeige senkrecht Achse -Automatische Zustellung -Automatische Endabschaltung programmierbar-Schleifspindelantrieb mit stufenloser, elektronischer Drehzahlregelung -stufenlos regelbarer Quervorschub, und Tischdrehung -24V Magnetspannplatte 300 mm -diverse Arbeitsschutzeinrichtungen z.B. Schutzhaubenüberwachung, Betriebszustandsanzeige per Ampel -Schmierölstandsüberwachung -die Maschine wurde 2015 generalüberholt, damals Austausch der gesamten Elektrik auf SPS-Steuerung und 24V Steuerspannung -Papierbandfilteranlage speziell für diese Maschine passend Folgende Arbeiten wurden nun noch durchgeführt:-Austausch Faltenbalg und Riemen-Schleifspindel neu gelagert -Schl ...
honing diameter: 45 mmstroke: 1000 mmthroat: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m4 spindle honing machine for gunsHoning area according to the manufacturer:Diameter 5-45mmMaximum Honing Length 750mmAccessories:Honing tools for diameter:-10mm-12,3mm-13,3mm-21,1mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 600 mmtable width: 380 mmcontrol: FANUC 0-M longitudinal travel: 500 mmcross travel: 300 mmlargest grinding diameter: 230 mmJig grinding machine | HAUSER - S35-400The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 600 mmtable width: 380 mmcontrol: FANUC 16-M longitudinal travel: 500 mmcross travel: 300 mmlargest grinding diameter: 230 mmJig grinding machine | HAUSER - S35-400The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 2,5 /3,3 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,2 x 0,75 x 1,4 mExhibition machine, unused.Belt sander with- 40 grit sanding belt- 8 sanding rollersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: - mmgrinding width: - mmworkpiece height: mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 1550 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 400 mmgrinding length: 1000 mmcentre height: 200 mmcontrol: Fanuc 0i-F workpiece weight: 100 kgtravel -z axis: 1150 mmmeasuring system resolution capability: 0,0001 mmrapid traverse: 20 m/mintravel -x axis: 365 mmrapid traverse: 20 m/mingrinding wheel size: 500 x 80 mmb-axis indexing accuracy +/-: 1 °spindle motor: 7,5 kWworkpiece turning speeds: 1 - 100 U/mingrinding head swivelling: 240 Gradtail stock: taper in tailstock MT: 4 tailstock quill stroke: 49 mmtotal power requirement: - kWweight of the machine ca.: 4,1 tdimensions of the machine ca.: 3,4 x 2,2 m3-axis cylindrical grinding machine equipped with:- CNC control Fanuc 0iF- B-axis- Coolant belt filter system- Tail stock- UR grinding head for internal, external and surface grindingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 250,350,450 mmgrinding length: 1500 mmcentre height: 125,175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ± 6 °longitudinal feed of the table: 1750 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 80 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 5,6 x 2,0 mOverhauled with geometric KELLENBERGER protocoll.Pictures of a similar 1000mm machine.Standard with:-New electric cabinet-New motor for the workpiecespindlehead-2-axis DROFotos of a delivered (1000U) machine with following optiones against extra charge:-protection doors-tails ...
