Fabricante:
(Categoria: 106)
Column spacing 1800 x 1000 mm, passage height 1900 mm Auction-ID: A1-44702-19
pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2550 mmstroke of upper beam: 200 mmthroat: 300 mmdayligth: 440 mmworking feed: 9.0 mm/secreturn speed: 80.0 mm/sec: 265 barControl: konv. work height max.: 965 mmtotal power requirement: 15.0 kWweight: 10500 kgrange L-W-H: 3360 x 1750 x 2800 mmEquipment:- simple / conventional electro-hydraulic press brake- pivoting operation, front left- electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism- Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers- manual (jog mode) and automatic cycle selector switch- manual table crowning- split set of roe foot upper tools ... H = 210 mm- 1x as good as new universal V-die block, reversible with anti-corrosion grease V openings in mm : 12/35/25 50 10/20/16/16 75 Dimensions of ...
pressure: 100 tstroke: 300 mmtable surface area: 1070 x 260 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1500 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x deliver ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7000 €: 135.1 €: 80 to: fix : 250 mm: 1040 mm: 200x120 mm: 5 mm/s: 10 mm/s: 1810 mm: 750 mm: 2100 mm: 835 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30.0 tchamfer lenght: 800 mmback stop - adjustable: max. 420 mmstroke of upper beam: 100 mmdayligth: 310 mmworking feed: 10.0 mm/secreturn speed: 12.0 mm/secControl: VISION 120 oil volume: ca. 38.0 lvoltage: 380 Vtotal power requirement: 4.5 kWweight of the machine ca.: 890 kgdimensions of the machine ca.: 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on requestEquipment:- electro-hydraulic NC press brake - easy to operate- UNITRONICS VISION 120 NC control system for press depth back gauge (Y X axis)- NC electro-motorized back gauge (X axis) Input of target/actual value possible 2x manually adjustable stop fingers- Operation front right- Many different insert/bending tools Top tool holder : AMADA/PROMECAM- 1x freely movable foot switch- EMERGENCY OFF button at the front- Rear safety device- operating instructionsThe data for this ad was created with ...
pressure: 100 ttable length: 1800 mmtable width: 1550 mmtable travel: 2000 mmdayligth: 1800 mmtotal power requirement: 19,5 KVAweight of the machine ca.: 22 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 150 mm/secwork speed: 10.0 mm/secreturn speed: 140 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 110 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 15000 kgrange L-W-H: 5000 x 2400 x 2850 mmALPMAC Manufacturer Video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC Product Video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth--------------------------------------------------------! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMAN ...
pressure: 135 tbevel length: 4000 mmdistance between columns: 3150 mmcolumn arm: 270 mmtotal power requirement: 15 kwdimensions: 4030 x 1440 x 2420 mmmachine weight ab.: 9500 kgEquipment:- MNC 10 control unit- Electric backgauge ( X )- Positioning of the depth adjustment ( Y1 Y2 )- 2 stop fingers, manually adjustable- Rear side guard- Upper and lower toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mmEquipment:- CNC electro-hydraulic folding/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front- CNC axis adjustment: Y1 - Y2 - X - R axis CNC crowning Manual adjustm ...
To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-7
Pressure kg/cm2º 185 kg To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-9
pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 mtotal power requirement: 300 kWweight of the machine ca.: 280 tdimensions of the machine ca.: 5,75 x 4,3 x 9,55 mYear of construction 1973Modernization 2005with oil-hydraulic drive, hydraulically controlled drawing cushion in the table andRam, hydraulic cutting impact dampingstored dismantled - short video available from the seller before dismantli ...
pressure: 4000 kNtable length: 2500 mmtable width: 2000 mmdayligth: 2500 mmstroke: 2600 mmtank capacity: 1000 ltotal power requirement: 56 kVAweight of the machine ca.: 85 tdimensions of the machine ca.: 9,2 x 3,1 x 8,2 mintegrated wax-injection unit with 0-5 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kWweight of the machine ca.: 280 tdimensions of the machine ca.: mThe machine was overtaken 1999.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmdistance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-6
pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kWweight of the machine ca.: 280 tdimensions of the machine ca.: mThe machine was overtaken 1999.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-4
To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-5
To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-10
2.000 € 
