Fabricante:
(Categoria: 108)
Incl. 3-jaw chuck, diameter: 120 mm.
Additional technical specifications:• Hole diameter: 30 mm• Distance from hole center to hole center: 100 mm
Oferta 26036 Dados técnicos aproximados: - Capacidade de carga aprox. 3000 kg - Diâmetro da placa frontal 1520 mm - A placa frontal pode ser inclinada pelo motor - Eletricidade de movimento rotativo. Infinitamente variável - Transmissão de corrente de soldadura 650 A - Transmissão 400 V - Altura da mesa em posição horizontal aprox. 1450 mm - Re- + rotação no sentido contrário aos ponteiros do relógio - Controlo remoto portátil - Pedal - Requisito de espaço aproximado. Lv: 1700 x  1500 x D, 2300 mm - Peso aprox. 2800 kg
TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled DIN EN 60974 -Length: 6.5 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 3.1 kg
TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 4 m -Connector: 5-pin -Transport dimensions: 340/340/H100 mm -Weight: 2.4 kg
Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 320 mm -Dimensions: 480/440/H470 mm -Weight: 38 kg
TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.4 m -Connector: 2-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.1 kg
Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 320/250 mm -Dimensions: 760/440/H470 mm -Weight: 40 kg
Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg
Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg
DALEX PMS 10-4 & Arrefecimento de Água COHLINE DALEX, tipo PMS 10-4, máquina de soldadura por pontos industrial potente e robusta, num conjunto pronto a usar com uma unidade de refrigeração a água COHLINE correspondente. Destaques e Condição: Quilometragem extremamente baixa: O sistema digital de controlo DALEX MPS 100 incorporado mostra uma leitura original do odómetro de apenas 13.282 ciclos! Para uma máquina industrial deste calibre, é como nova e garante desgaste mínimo. Alta força de elétrodo: Este modelo oferece uma pressão de contacto poderosa até 690 daN para soldaduras pontuais, mesmo em chapas mais espessas. Incluindo arrefecimento: Graças à potente unidade de arrefecimento COHLINE (5,8 kW), a máquina está imediatamente pronta para operar em turnos industriais permanentes sem sobreaquecimento. Flexibilidade e Segurança: Equipado com um ...
wire electrode, welding wire, welding wire -Manufacturer: Elgar, started roll of MAG wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300/100 mm -Weight roll: 10.1 kg
Oferta 26289 Dados técnicos aproximados: - Máquina CNC de corte de chama com 2 queimadores, conforme mostrado - 2 alturas dos queimadores + ajuste de inclinação - Bitola aproximada 4,2 m - Comprimento da via aproximadamente 7,5 m - Altura da via aprox. 0,5 m - Requisito de espaço aprox. L 8 x W 7,5 x H 2,3 m - Peso aprox. 3 T - Sem tabela de suporte
A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement.
An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement.
Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.
Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.
Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.
Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible.
Fabricante e modelo: iDEAL BAS 050-11 Potência nominal (ED 50%): 4,5 kVA Tensão secundária: 2,6 – 4,4 V (6 estágios) Força de aperto: 10 kN (hidráulica) Força máxima de compressão: 2,2 kN Iisc Hq E Rrszqdkxjvef Peso da máquina: aprox. 180 kg Tensão hidráulica, operada por interruptor de pé Pirómetro (GTR): sim (ecrã de temperatura no painel tátil) Tensão de ligação: 380 – 419 V Lâminas de serra bimetálico/carboneto: 6×0,6 – 34×1,1 mm Lâminas de serra a madeira: 6×0,4 – 50×1,0 mm Lâminas de serra em aço inoxidável: 6×0,4 – 25×0,5 mm Dimensões da pá: 6×0,4 – 30×0,6 mm Aço de lâmina S235JR: secção transversal máxima 75 mm² Aço de lâmina X5CrNi18-10: secção transversal máxima: 40 mm² Pirómetro / GTR: O pirômetro integrado (GTR) permite a medição de temperatura sem contacto durante o processo de recozimento. A temp ...
An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.
Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.
Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Donaldson Torit, mobile welding fume extraction / dust collector type PT 1000 -Drive: 1.1 kW -Max. volume flow: 1100 m³/h -Extraction arm: Ø 165 mm x 2210 mm -Transport dimensions: 1200/620/H1645 mm -Weight: 105 kg
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg
