subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 103)
This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details.
Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement.
Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.
A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.
This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details.
This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine.
This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information.
Caras senhoras e senhores, Na loja de Bruchsal, oferecemos uma máquina usada à venda sem compromisso: Máquina de fresagem de engrenagens sem-fim, máquina de moldagem Fabricante: Gleason Pfauter Tipo: GP200 Ano de Fabricação: 2002 Peso: aprox. 9,7 t Se estiver interessado, por favor deixe-nos uma oferta até 15.06.2026, tendo em conta os seguintes pontos: Se tiver alguma dúvida ou quiser marcar uma visita (a partir de 01.06.2026), não hesite em contactar-nos.
A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.
Diâmetro da fresadora 250 mm Largura de fresagem: 305 mm Profundidade de fresagem: 160 mm Abraçadeiras pneumáticas para peças Alimentação manual Peso: aprox. 200 kg
Para perfis particularmente elevados de PVC ou alumínio Diâmetro da fresadora 250 mm Largura de fresagem: 305 mm Profundidade de fresagem: 200 mm Abraçadeiras pneumáticas para peças Peso manual de avanço: aprox. 300 kg
This 4-axis AXA DBZ vertical double machining centre was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load of approximately 550 kg. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details.
This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details.
Velocidade 32 - 1500 rpm Ecrã digital de 3 eixos Mitutoyo Comprimento 2,60 m Largura 2 m Altura 2,05 m Peso 3,5 t Cor: Verde Fresadoras Montagens para fresadora
380 V 16 A 63-800 rpm Comprimento 1 m Largura 0,8 m Altura 1,40 m Cor: Verde A máquina foi revista.
380 V 16 A Velocidades 100 - 1250 rpm Comprimento 1 m Largura 0,8 m Altura 1,40 m Mesa convertida para controlo pneumático.
These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The second machine features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details.
A CNC universal bed milling machine Anayak is available. Travel X/Y/Z: 2500mm/900mm/975mm, table dimensions X/Y: 2900mm/800mm, spindle taper: ISO50, spindle speed: 3000rpm, power: 22kW, feed: 6m/min, rapid traverse: 10m/min, tool positions: 30. Machine dimensions X/Y/Z: approx. 6000mm/3000mm/3000mm, weight: approx. 20000kg, control: Heidenhain TNC 426. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.
A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible.
Key data: 600 mm, 400 mm, 400 mm
Fresadora CNC MAHO MH 600 E – usada, funcional (apenas para uso comercial) À venda está uma fresadora CNC MAHO MH 600 E de 1989 em estado de uso. A máquina apresenta sinais de desgaste consoante a sua idade, mas encontra-se basicamente em condições funcionais e atualmente sob energia, pelo que uma inspeção e demonstração durante a operação é possível a qualquer momento, mediante acordo. Dados técnicos: Cursos: X 600 mm / Y 450 mm / Z 450 mm Velocidade do fuso: máximo 4.000 rpm Suporte para ferramentas: SK40 Condição / Notas: Máquina a funcionar e pronta a usar Todos os eixos podem ser movidos Funcional do sistema de controlo Eixo Z claramente audível durante o processo (segundo a declaração do ajustador, não é invulgar neste tipo) A embraiagem antideslizante do eixo Z é oleosa e deve ser substituída quando surgir a oportunidade Nota: ...
Ano de Fabricação: 2015 Tipo de máquina: BC 1001 HS Horas totais de produção: 1608h Tempo total de espera: 5070h
This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details.
This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details.
Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...
This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.
HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces.Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg.Portal clearance approx. 3,220 mm width / 2,050 mm height.5-axis machining / milling headsA- and B-axis (swivel axes in the milling head)C-axis (360° rotation)Simultaneous 5-axis machining possible (with fork head)Milling heads:Straight milling head FK 120/34090° angle head WFK 100/750MFork head FK 100/2DMilling head magazine:5 positionsAutomatic milling head changeAdditional equipment:Internal cooling (IKZ) approx. 7 barTool changer 32 positions (SK50, Fibro ATC 32/50)Tool holder SK50 (DIN 69871)Tool measuring system (laser)Chip conveyorCoolant systemAdaptive feed controlHeidenhain line ...
POS POSmill H 800 U – 5-axis machining centerThe machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer.A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry.Operating data:Control ON: approx. 25,280 hMachine ON: approx. 24,730 hProgram run: approx. 9,150 hSpindle hours: approx. 8,555 h
POS PosMill Type C1050 – Universal Milling MachineUniversal milling machine with travel paths X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm.CNC control HEIDENHAIN iTNC 530.Hydraulic system for precise movements.Equipment: Coolant system and chip conveyor.Machine with protective devices and emergency stop system.
POS PosMill Typ 1100 3-axis CNC milling machineVertical CNC machining center with a machine table size of approx. 1,050 x 600 mm.Equipped with a HEIDENHAIN TNC 430 CNC control.Automatic tool changer.Equipment: cooling system with through-spindle coolant (IKZ), hydraulic system, and chip conveyor.
Key data: 500 mm, 400 mm, 400 mm
Máquina Universal de Fresagem e Perfuração DECKEL MAHO DMU 50 M Com controlo Heidenhain TNC 310 Ano de Fabricação: 2001 Viagem: X 500 Y 400 Z 400 Gama de velocidades: 20 – 4.500 rpm variável infinitamente Com os seguintes acessórios: Giro manual – mesa rotativa com ecrã digital para os eixos C + B Superfície de fixação de 700 mm x 500 mm Volante eletrónico para eixos X, Y, Z Cabine de proteção de salpicos Luz de Máquina 4 Sapatos de Máquina Ajustáveis em Altura Configuração do Líquido de Arrefecimento Instruções de funcionamento
