KLINGELNBERG máquina utilizada para venda

Gerador de engrenagens cônicas espirais Klingelnberg AFK 201, AFK203

Klingelnberg PFS600 Testador de engrenagens

Klingelnberg S-35 Máquina de corte de engrenagem CNC de 10 eixos CONTROLO CNC DE 10 EIXOS ADEQUADO PARA BISEL ESPIRAL MÉDIO OU GRANDE OU ENGRENAGENS HIPÓIDES 23,6 polegadas DIÂMETRO MÁXIMO DA PEÇA PROJETADO DE ALTA CONFIABILIDADE E PRECISÃO OPERAÇÕES DE INDEXAÇÃO CONTÍNUAS OU ÚNICAS ESPECIFICAÇÕES: DIÂMETRO MÁXIMO DA PEÇA 23,6 polegadas (600 mm) MÓDULO NORMAL MAIS PEQUENO 0,137 polegadas MAIOR MÓDULO NORMAL 0,393 polegadas LARGURA MÁXIMA DO DENTE 3,93 polegadas MENOR RELAÇÃO DE TRANSMISSÃO 1:1 MAIOR RELAÇÃO DE TRANSMISSÃO 1:10 ÂNGULO ESPIRAL (GRAUS) 0-60 FUSO DA CABEÇA DO CORTADOR: CONE CURTO OERLIKON 1:4 0-5.118 polegadas VELOCIDADES DO EIXO (INF. VAR.) 30-350 MIN-1 INCLINAÇÃO DO EIXO (GRAUS) 0-35 EXCENTRICIDADE 0-10,82 polegadas RAIO DA CABEÇA DE CORTE 3,46 polegadas-7,12 polegadas EIXO DA PEÇA OERLIKON FORA TAPER 1:4 0 ...

KLINGELNBERG PFS 600 Máquina de teste de engrenagens Diâmetro da engrenagem 15-600 mm Largura da engrenagem 160 mm Faixa de módulos 0,5-15 Curso do Feeler 165 mm Altura entre centros 50-650 mm Comprimento máximo da peça 665 mm Ângulo de hélice 0-90 Peso máximo da peça 300 kg

TESTER DE PLACA DE ENGRENAGEM Fazer: KLINGELNBERG Modelo: PWF 250 Diâmetro: 250 mm Min Módulo: 2,5 mm Módulo Max: 20 mm Distância entre centros: 470 mm Peso: 1500 mm

Cortador de circulação de Klingelberg

Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.

Max. workpiece diameter: 10-350mm, max. grinding length/ width: 690/ 60mm, clamping length: 950-1330mm, swing angle: -60 to 60°, length: 6200mm, width: 4000mm, height: 2500mm, weight: 9t, with oil filtration system, oil mist extraction and additional accessories.

Workpiece diameter: 10-350mm, max. grinding length: 660mm, clamping length: 1055mm, max. module: 25mm, swivel angle: +/-60°, grinding wheel dimensions: 300-500x100mm, with Faudi cooling lubricant belt filter and Elbaron oil mist separator.

Max. workpiece diameter: 10-350mm, max. grinding length: 600mm, clamping length: 1055mm, swivel angle: +/-60°, with oil mist filtration, an inspection is possible.

A modernized Klingelnberg SNC 31 CNC 6-Axis Tool Grinding Machine. Modernizations: new belt drives, new flanges, new servo motors and new couplings in all axes. Hydraulics: new drive pump, new motor, new hydraulic hoses, original lubricant pump. Installation of a new control cabin with CNC (Siemens 840D sl) and new electrical construction (VDE). Detailed information about the modernization on request. With filter system and CO2 extinguishing system (Dangelmaier). On-site inspection is possible.

max. wheel diameter: 500 mm gear width: 200-400 mm module: 12 turning speeds: 0-3250 U/min bracke pressure: bis max. 95 Nm inner taper: Konus #39 Control: Fanuc 16 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2.350 x 2.240 x 2.500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro máximo da roda: 540 mm velocidades de giro: 315 - 1260 U/min ajuste do eixo +/-: 50 mm relação: 1 : 1 bis 1 : 10 cone MK: peso da máquina ca.: 2,3 t dimensões da máquina ca.: 1,7 x 2,1 x 1,5 m

diâmetro máximo da roda: --- mm largura da engrenagem: --- mm módulo máximo: --- módulo mínimo: --- Controlo: --- Potência total necessária: --- kW peso da máquina ca.: --- t dimensões da máquina ca.: --- m

diâmetro da roda: módulo 0-200 mmmax: 25 min. módulo: 0,5

Diâmetro: 400 mm Klingelnberg - AFK 151 Máquina de corte de engrenagem de bisel em espiral 400 x Mod 6 MACH - ID 6237 Faça: Klingelnberg Tipo: AFK 151 YOP: 1960 Márcia   400  Modu    l6 mm Dimensões Comprimento    3.000 mm Largura      2.200 mm Altura     2.000 mm Peso     6.900 kg

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro externo: 113 mm bore diâmetro em mm: 32 mm largura: 130 mm

diâmetro externo: 118 mm bore diâmetro em mm: 40 mm largura: 157 mm

external diameter: 112 mm bore diameter in mm: 32 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro externo: 106 mm bore diâmetro em mm: 32 mm largura: 108 mm

diâmetro externo: 88 mm bore diâmetro em mm: 27 mm largura: 91 mm

diâmetro externo: 111 mm diâmetro em mm: 32 mm largura: 130 mm

diâmetro externo: 108 mm bore diâmetro em mm: 32 mm largura: 140 mm

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1.5 max. workpiece diameter: 275 mm tooth width: max. 5.5 mm spiral angle: 0 - 60 ° number of teeth: 5 - 120 transmission ratio min.: 1:1 transmission ratio max.: 1:10 milling drive motor: 20 kW workpiece drive: 14.5 kW total power requirement: 62 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel ...

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: NA mm max. module: 1 min. module: 10 total power requirement: 12 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total ele ...

diâmetro externo: 128 mm diâmetro em mm: 40 mm largura: 130 mm

diâmetro externo: 103 mm bore diâmetro em mm: 32 mm largura: 108 mm

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...