trabalho de chapa metálica usadas para venda (3,341)

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44802-228

: neu : ca. 12 Wochen ab Auftrags : Türkei : 22300 €: 428.16 €: 1550 mm: 4.5 mm: 4.5 mm: 3.5 mm: 4.5 mm: 3.5 mm: 3.5 mm: 2.5 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 3300 mm: 1150 mm: 1110 mm: 2370 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44803-228

Swivel bending machine with>br>- mechanical backgauge>br>- bending angle preselection>br>- foot switch>br>sheet width 2540 mm>br>sheet thickness 2.5 mm>br>column width 2540 mm>br>opening width 200 mm>br>total power requirement 2.0 kW>br>machine weight approx. 1.7 t>br> space requirement approx. 3.35 x 0.8 x 1.4 m Auction-ID: A7-44817-57

Hand bending machine >br>>br>flat bar 30 x 8 mm>br>square steel 12 mm>br>round steel 15 mm>br>weight 0.025 t>br>pack size max. 51 x 31 x 22 cm>br> >br>condition: never used / new (5) Auction-ID: A7-44817-161

Combi-machine, sheet metal roller, bending and cutting>br>bending max. 1 mm.>br>rollers max. 1 mm.>br>cutting max. 1 mm.>br>width of segments 25 - 50 - 75 - 75 - 105 mm.>br>Maximum working width 305 mm.>br>diameter of rollers 38 mm.>br>Maximum bending angle 90 degrees. >br>condition: never used / new (5) Auction-ID: A7-44817-113

Sheet width 2500 mm>br>Sheet thickness 3.0 mm>br>Stand width 2620 mm>br>Back gauge - adjustable 850 mm>br>Machine weight approx. 2.8 t>br>Dimensions L x W x H 3.2 x 1.8 x 1.7 m>br> >br>Condition: untested (6) Auction-ID: A7-44817-146

Flat Steel Bending Machine>br>The following bending tools are included:>br>1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" >br>>br>bending tools diameter 1\" to 3\" mm>br>wall thickness max. 16 mm>br>machine weight approx. 26 Kg>br>pack size max. 0.6 x 0.3 x 0.3 m >br> condition: never used / new (5) Auction-ID: A7-44817-171

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-44802-35

Swivel bending machine>br>bending length 915mm>br>sheet thickness max. 1.0mm>br>bending angle max. 135 degrees>br>divided upper tool:>br>25 - 50 - 75 - 200 - 2 x 300 mm. >br>See pictures >br>condition: never used / new (5) Auction-ID: A7-44817-185

Combined sheet metal processing machine with:>br> bending, tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm.>br> rolls, roll diameter 42mm>br>- shears, max. 1015 x 1mm>br>>br>material width 1015 mm>br>material thickness 1 mm>br>speed by hand >br>weight 0.25 t>br>Dimensions L x W x H 1.4 x 0.6 x 0.75 m>br> >br>Condition: never used / new (5) Auction-ID: A7-44817-65

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-44802-60

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44803-26

Hydraulic guillotine shears with>br>- ELGO control for backgauge>br>- Cutting angle adjustment>br>- Cutting length adjustment>br>- Cutting length limitation (time-dependent)>br>- Sheet thickness adjustment>br>- Backgauge with free-moving function>br>- Cutting line lighting>br>- Side >stopbr br>- 3 pcs. support brackets>br>- good condition>br>sheet width 3050 mm>br>sheet thickness 16 mm>br>stand width 3050 mm>br>stop depth 15-1000 mm>br>cutting angle adjustment yes °>br>Cutting gap adjustment yes mm>br>Connected load 30 kW>br>Machine weight approx. 14..5 t>br> Space requirement approx. 4.0 x 260 x 2.55 m Auction-ID: A7-44817-25

Pressure 20 t>br>stroke 200 mm>br>table size 550 x 550 mm>br>Working speed: 10 mm/ sec.>br>Working height 940 mm>br>Tool height max. 200 mm>br>Total power requirement 2.2 kW>br>Bending power 200 x 10 mm>br>Weight 650 kg>br>Dimensions 1.1 x 0.6 x 1.22 m >br>Condition: never used / new (5) Auction-ID: A7-44817-16

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44802-26

: neu : 2025 : 090130 : prompt, Zwischenverkauf v : Türkei : 3400 €: 1 : 30 mm: 148 mm: 118 mm: 2 : 0,75 kW: 2 m/min: 50x10 mm / 800 mm, 20x6 m : 80x15 mm / 700 mm, 30 x 6 : 30x30 mm / 900 mm, 10x10 : Ø 30 mm / 900 mm, Ø 10 mm : Ø 60x1,5 mm / 1.000 mm, Ø : 50x30x3 mm / 1.200 mm, 40 : 40x40x3 mm / 1.200 mm, 30 : 40x40x5 mm / 600 mm, 30x3 : 35x35x5 mm / 600 mm, 30x3 : 600 mm: 800 mm: 1450 mm: 220 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN or ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2012 : 9690F : prompt, Zwischenverkauf v : China : 690 €: 1 : 100 mm: 3 mm: 90 °: 90 kgBeidseitig verstellbare AnschlägeFingerschutzAusrüstung gemäß CE VorschriftenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 620 mmstroke: 0-100 mmhole diameter in sheet thickness: 40 in 20 mmno. of strokes: 49 Hub/minControl: total power requirement: 15 kWweight of the machine ca.: 3.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ca. 12 - 14 Wochen ab Auf : Türkei : 20000 €: 5 mm: 1200 mm: 4,1 m/min: 3000 mm: 750 mm: 1400 mm: 1350 kg: 250 / 2000 mm: 300 mmMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemAccording to EC safety regulationsOperating manualOptional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 3,0 mmdistance between columns: 2550 mmtrue cutting angle adjustable: - back stop - adjustable: max. 510 mmcutting gap adjustment: - mmtotal power requirement: kWweight of the machine ca.: 1,8 tdimensions: 3,3 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 3,0 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,47 tdimensions of the machine ca.: 1,7 x 0,8 x 1,35 mmSheet metal bending machine with custom dimensions:- Capacity 1050 x 3.0 mm- Digital display- Hardened rollers- Conical bending- Swiveling top roller- Brake motor- Safety device: Emergency stop cord- Documentation in English- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2,5 mmdistance between columns: 2540 mmdaylight opening: 200 mmtotal power requirement: 2,0 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 3,35 x 0,8 x 1,4 mSwivel bending machine with- mechanical backgauge- bending angle preselection- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 2,0 mmdistance between columns: 3140 mmdaylight opening: 80 mmtotal power requirement: kWweight of the machine ca.: 1,45 tdimensions of the machine ca.: 3,8 x 1,5 x 1,6 mPneumatic segment bending machine- Manual backgauge max. 830 mm- Bending angle preselection via limit switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10800 €: 207.36 €: 35 mm: 137 mm: 137 mm: 3 : 1.1 kW: 7 m/min: 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm: 500 mm: 1250 mm: 350 kg3 mech. driven rolls (brake motor)hardened and ground shaftslower rolls hydraulic adjustablehorizontal and vertical operationstandard set of rollsfoot pedal forfor- and backward drive2 digital readoutscontrol panelmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 & 1 x 1.050 mmcomplete 30°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090086 : prompt, Zwischenverkauf v : Türkei : 7400 €: 142.82 €: 1 : 197 mm: 4 mm: 2 mm: 20 1/min: 90 °: 4 kW: 890 mm: 780 mm: 1115 mm: 550 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 €: 1583.82 €: 2550 mm: 15 mm: 15 mm: 13 mm: 12 mm: 12 mm: 10 mm: 270 mm: 270 mm: 230 mm: 50 mm: 1155 mm: 15 kW: 4760 mm: 1660 mm: 1155 mm: 8950 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 €: 2895.48 €: 1350 mm: 0,4 - 120 mm: 1370 x 2200 mm: 6000 m³/h: 150 mm: 6 bar: 4200 mm: 2300 mm: 2350 mm: 4200 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station.Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messagesFEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximum height of 950 m ...