Fabricante:
(Categoria: 104)
: neu : 2024 : 5546 : prompt, Zwischenverkauf v : Polen : 1730 €: 1 : 150 mm: 2.000 x 150 mm: 200 x 150 x 42 ø mm: 605 mm: 3000 1/min: 3.5 kW: 1025 mm: 600 mm: 1000 mm: 100 kgIndustrial belt grinder with following features:- Separate emergency stop- Motor brake- Standard- Reliable- Simple and practical operation- Easy to adjust- Quick belt change without tools- 5-year guarantee on the motor- Optimal safetyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 450 mmy-travel: x mmz-travel: x mmgrinding wheel diameter: 175 mmweight of the machine ca.: 0.2 tTurning tool holderDividing head with colletsTable support D-140mmwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 4000 mmgrinding length: 6000 mmswing diameter: mmclamping length max.: 6000 mmgrinding spindle speed: 420 - 1110 U/mingrinding wheel peripheral speeds:: 1800 m/mingrinding motor: 15 kWgrinding wheel size: 760 x 90 x 304,8 mmfaceplate turning speed range -stepless-: 3 - 30 U/mindrive capacity - workpiece: 15 kWfeed range - grinding spindle: - mm/minworkpiece weight: 15 + ttotal power requirement: - kWweight of the machine ca.: ca 30 tdimensions of the machine ca.: ca 13 x 2,6 mHeavy-duty roll grinding machine- workpiece drive- tailstock- coolant system- various steady rests- polishing motor- crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 400 mmno. of working stations: 1 Stücktotal power requirement: 1,7 kWweight of the machine ca.: 0.4 tWith coolant systemMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding band dimension: 150 x 2000 mmband speed: 33 m/secweight of the machine ca.: 105 kgengine output: 4 kWturning speeds: 2800 U/minAccessories / equipment:- Vibration-free running smoothness- Adjustable working height- S1 motors with 100% duty cycle- Surface and contact grinding possible- Removable protective cover for surface grinding- Connection piece for double suction- Built according to the CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 76980 €: 1454.92 €: 1015 mm: 610 mm: 1.000 x 400 mm: 400 x 1.000 mm: 1050 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 480 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 1.800 1/min: 3.75 kW: 1.5 kW: 1.1 kW: 1.1 kW: 4280 mm: 2080 mm: 2100 mm: 3500 kg: 220 kg: 440 kg: 355 x 50 x 127 mm: 0,001 mm10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment w ...
width of the strips: 100 mmband length: 2000 mmband speed: 15 + 30 m/seltube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 GradDust suction hood: 2 x 75.0 mmmotor speeds:: 1420 / 2660 Upm.face grinding attachment: 400 x 100 mmtotal power requirement: 2.5 / 3.3 kWweight of the machine ca.: 148 kg.range L-W-H: 750 x 1400 x 1200 mmFurnishing :- Constant belt tension through spring-loaded tensioning device- Standard with cylindrical grinding device- for grinding diameters of diam. 20-76 mm- Quick and easy setting of the desired grinding angle- Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt- Large plan grinding surface with protective cover- Slow belt speed (15 m / sec.)- ideal for grinding stainless steel and aluminum- User-friendly tape change, quick and uncomplicated- Quick and easy changing of the grinding rollers without tool ...
drill diameter: 40 mmdrilling length: 500 mmlip angle: 160 °clearance angle: 1 - 10 °toolpiece turning speed range: 42 / 28 / 21 U/minfeed range: 0,6-1,2-1,5-3,0 mm/mingrinding wheel dia. x width: 210 x 127 x 50 mmgrinding spindle speed: 3150 U/mintotal power requirement: 3,3 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,0 x 1,0 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mmThe TUGRA TT 90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- easy manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 77000 €: 1455.3 €: 460 mm: 445 mm: 460 x 200 mm: 450 x 200 mm: 0,1 - 25 m/min: 0 - 3000 mm/min: 0,001 mm: 220 mm: 340 mm: 0 - 3000 mm/min: 0.001 mm: 1000 - 7000 1/min: 3 kW: 0.7 kW: 1.1 kW: 1.1 kW: 2510 mm: 2515 mm: 2010 mm: 1550 kg: 1015 mm: 175 kg: 210 kg: Dm. 205 x 12,7 x 31,75 mm: 0,004 mm: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, checkout 7)Longitudinal guides with double V shape, with Turcite-B coatingTransverse and verti ...
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2160 €: 75 mm: 75 x 2000 mm: 200 x 75 mm: 530 mm: 3 kW: 35 m/s: 475 - 1240 mm: 1100 mm: 550 mm: 1035 mm: 100 kgIndustrial-belt grinding machinePowerful motorEnclosed grinding head ensure a very effective extraction systemThermal overload protectionEmergency stopElectronic motor brakeAdjustable supportEye protectionStepless adjustable working heightSelf adjusting belt tensionerOperating manual in German or EnglishALTERNATIVEVersion TAS 75X/2 with 2 speeds € 2.530,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt width: 150 mmsanding belt length: 2000 mmband speed: 33 m/secengine output: 3 kWMotor speed: 2800 UpMweight of the machine ca.: 105 kgDomestic equipments:- vibration-free running smoothness- Working height adjustable- S1 motors with 100% duty cycle- Surface and contact grinding is possible- Removable protective cover for surface grinding- Connecting piece for double suction- Built to CE standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 74030 €: 1399.17 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 420 kg: 700 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 350 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2000 1/min: 5,5 kW: 0.75 kW: 1.1 kW: 1.1 kW: 2710 mm: 2428 mm: 2200 mm: 3500 kg: 975 mm: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working areagrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED mach ...
: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: Dm. 200x78x78 mm: 2800 1/min: 300 mm: 300x150x55 mm: 350x150 mm: 500x160 mm: 3.6 kW: 1020 mm: 820 mm: 2170 mm: 440 kgThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric stability ...
grinding diameter: 630 mmgrinding length: 6000 mmcentre height: 300 mmworkpiece weight: 2500 kggrinding wheel dia. x width: 700 x 80 mmgrinding spindle speed: 12 - 1800 U/minrapid traverse grinding slide: 350 mmfeed: minimalst 0,002 mmworkpiece spindle head:: turning speeds: 8 - 120 U/mintable - swivable: 10,1 °table speeds: 30 - 4500 m/mintotal power requirement: 30 kWweight of the machine ca.: 16 todimensions of the machine ca.: mEletricals were replaced with brand new ones in 2025.- Stone wheel 4set 700mm dia x 70,75,80,85mm width. + few extra stones- Wheel Dresser- Digital Read Out- Steady Rest 2set- Small Steady Rest 4set- Internal Grinding AttachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter: 2 - 25 mmdrilling length: - mmlip angle: - °total power requirement: 2 kWweight of the machine ca.: 0,25 tdimensions of the machine ca.: 0,8 x 0,8 x 1,5 mNo. 5414Drill grinding machine REMA S 2 - 25Ø 2 - 25 mmGood condition from vocational schoolIncl. coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Operating voltage: 220/380 VFrequency: 50 HzRated current: 3.1/1.8 Awith a total of two grinding machinesTable dimensions: 290 x 170 mm and 380 x 190 mmGrinding wheel diameter: 100 mm and 200 mm Auction-ID: A7-49089-134
Diameter: from 1.0 to 20 mmPoint angle: from 60 to 160°Grinding wheel diameter: approx. 160 mm Auction-ID: A7-49089-135
Serial Number: 265853JOperating Voltage: 230VFrequency: 50HzRated Current: 1.6ASpeed: 2850rpm Auction-ID: A7-49089-115
Machine number: 87018430Belt size: 200 x 1800 mmBelt speed: 10/20Table dimensions: 220 x 190 mm Auction-ID: A7-49089-381
Operating voltage: 220/380 VFrequency: 50 HzConnection: 500 WGrinding wheel diameter: 200 mmWidth: 25 mm Auction-ID: A7-49089-408
Strip width: 50 mmincl. grinding wheelDiameter: 150 mmGrinding wheel width: 25 mm Auction-ID: A7-49089-372
Serial number: 0703039.001Operating voltage: 230/400 VConnection: 0.9 kWRated current: 3.6/2.1Speed: 2900 rpmGrinding wheel dimensions: 200 x 32 x 51 mm Auction-ID: A7-49089-477
Belt size: 100 x 1000 mmBelt speed: 7.5/15 m/s Auction-ID: A7-49089-478
: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 €: 250 x 40 x 51 mm: 1300 x 75 mm: 1,4 kW: 1400 1/min: 15 m/s: 42 mm: 600 mm: 540 mm: 1190 mm: 1200 x 800 x 1000 mm: 70 kgWith base frame, integrated suction and brakeHigh performanceBelt grinding device height adjustable 0-90°.Maximum usable face grinding areaBelt adjustment with fine adjustmentLongitudinal stop for material guidePerfectly balanced and low vibrationConnection on both sides for dust extraction Ø 50 mmMotor protection switch with undervoltage releaseFixed stop1 Sanding belt standard (brown), grit 801 grinding wheel 250 x 40 x 51 mm, grit 80Spark protectionConnection cable with CEE plugALTERNATIVES:Version without suction (Art. 330.365)Version without stand, suction and brake (Art. 330.360)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1000 mmgrinding length: 6000 mmswing diameter: 1400 mmturning length: 6000 mmworkpiece weight: 20000 kgSpeed: U/min.main drive DC: kWtotal power requirement: kVAweight of the machine ca.: - tdimensions of the machine ca.: - m- 4 open steadies- tailstock- DRO Heidenhain- chuck dia 900mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1800 mmgrinding length: 8800 mmswing diameter: 1800 mmturning length: mmworkpiece weight: 65000 kgSpeed: U/min.main drive DC: kWtotal power requirement: kVAweight of the machine ca.: - tdimensions of the machine ca.: - m- Taper Grinding attachment- 4 open steadies- tailstock- chuck dia 1150mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1670 mmgrinding length: 8990 mmswing diameter: 1670 mmgrinding diameter - min.: mmworkpiece weight: 65 tgrinding spindle speed: U/minroll drive: U/minfeed speeds: m/mingrinding wheel motor: kWcontrol: Siemens 840D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2012- CNC Control Siemens 840D- Lismar Measuring System- 5 open steadies- tailstock- chuck dia 1200mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1100 mmgrinding length: 7000 mmswing diameter: 1100 mmgrinding diameter - min.: 350 mmgrinding wheel size: 915 x 100 x 304,8 mmgrinding wheel turining speeds: 400 - 1200 U/mingrinding motor: - kWspindle headstock drive: - kWControl: Siemens 840D SL workpiece weight max.: 18000 kgtotal power requirement: 110 kVAweight of the machine ca.: 68 tdimensions of the machine ca.: - m- 2011 retrofitted with new eletctric/mechanic and new CNC- CNC System Siemens 840D sl- Lismar Measuring System- Chuck dia 700mm- 4 steadies- TailstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1500 mmgrinding width: 700 mmworkpiece height: mmgrinding height: mmtable load capacity: 1200 kgtable surface area: ca 1800 x 600 mmtable speeds: 2 - 30 m/minstroke: Vertikal 400 mmspindle motor: 37 kWspindle speeds (infinitely variable): 100 - 6500 U/mingrinding wheel size: 500 x 100 x 203 mmControl: Siemens 840D total power requirement: 52 kWweight of the machine ca.: - tdimensions of the machine ca.: - mCNC control Siemens Sinumerik 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
250 € 
