Fabricante:
(Categoria: 108)
Tucker dce1500 + ETF21D stud welling Auction-ID: A1-44766-138
table diameter: 790 mmtable load: 500 Kgswivelling range: 0 - 135 Gradturning speeds: max. 2,0 U/minconnected load frequency: 400 Vweight: 0,95 tDimensions (LxWxH): 1,4 x 0,8 x 1,5 mWelding turntable incl.- Control column with foot switch- 630mm chuck- Chuck keyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tucker dce1500 + ETF21D stud welling Auction-ID: A1-44766-137
Complete pallet with various unused hose packages from Leoni and Sumcab Auction-ID: A1-44766-160
Machine table: 300×250 mmsonotrode stroke: 100 mm machine/sonotrode height 0 – 400 mm generator power: 2000 Watt frequency: 20 kHzSerial: 2362Estimated weight: 120 kg Approximate dimensions: 600x600x1000 mm Auction-ID: A7-44996-174
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...
: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...
Power: 900 W; max. clamping force: 100 Psig (690 Kpa); stroke: 73mm; Top dimensions: 360 x 260mm. Serial: WT50681KEstimated weight: 200 kg Approximate dimensions: 1200x800xh500 mm Auction-ID: A7-44996-173
Frequency 20 kHz, Power: 1500W, Voltage: 240V, Stroke length: (3.9\") 100mm.Serial: WW401080Estimated weight: 70 kg Approximate dimensions: 1200x800x500 mm Auction-ID: A7-44996-171
Stick welding machineEstimated weight: 15kg Approximate dimensions: 800x600xh600mm Auction-ID: A7-44996-172
: neu : ca. 2 - 4 Wochen ab Auftr : 3420 €: 2000 x 1000 mm: 850 mm: 8000 kg: 712 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...
: neu : ca. 2 - 4 Wochen ab Auftr : 1190 €: 1000 x 1000 mm: 850 mm: 210 kg: 25 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capa ...
: neu : ca. 4 Wochen ab Auftragse : 1940 €: 2000 x 1000 mm: 850 mm: 449 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...
: neu : ca. 2 - 4 Wochen ab Auftr : 2697 €: 2000 x 1000 mm: 3000 kg: 348 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2000 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...
: neu : ca. 2 - 4 Wochen ab Auftr : 4400 €: 2400 x 1200 mm: 850 mm: 8000 kg: 945 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...
Operation: both defective Auction-ID: A1-41989-35
Excluding bus 787 Hours Remote control included Auction-ID: A1-41989-40
Without wheels, fixed arrangement. ! Pay attention to ! Excl pallet truck Auction-ID: A1-41989-36
Wire feed unit welding rack Auction-ID: A1-41989-39
Consisting of; Welding machine: Cloos GLC356-B Series number 202 Welding machine: Bester Magster 500 Series number 643366 Tig Welding machine SAF Nertabloc TH260P Plasma cutter SAF nertajet Zip all in working condition Auction-ID: A1-41989-135
number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ESAB ESP-150 plasma cutting machine. 150A industrial plasma cutter. 3-phase connection 380/400/415V. Includes torch and cables. Fan cooling. Machine weight approx. 360 kg. Coming from a business environment. Auction-ID: A3-43497-11344
500 € 
