subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 103)
Bokö Universal Milling Machine Hydromill Box dimensions: H:900 W:500 L:600 Weight: 5000kg Auction-ID: A7-44493-121
Auction-ID: A1-40973-77
Technical data travels: X-axis (longitudinal): 300 mm. Y-axis (transverse): 150 mm to 160 mm. Z-axis (vertical): 330 mm to 340 mm. Spindle & Drive: Tool holder: SK40 (S20x2 tightening thread). Speed range: 40 – 2000 rpm (often in 16 steps or 2 gears). Feed: Infinitely adjustable in all three axes on the active version. Dimensions & Weight: Table size: Approx. 600 x 210 mm as standard. Auction-ID: A7-44493-53
: gebraucht : 2004 : 4540 : ca. 2 Wochen ab Auftragse : Österreich : 19900 €: 1 : 63 - 3150 (18) U/min: 700 x 500 x 500 mm: 900 x 500 mm: 6.6 kW: 2150 mm: 2220 mm: 2120 mm: 2550 kg: 500 kg: 100 mmCNCHeidenhain TNC 41018. mech. feeds with rapid travel in X,Y,Z axesball screw spindlestoolmaker accuracyDIN 8615hyd. tool clamping with holdersSK40 vertical und horizontalvertical spindle+/- 30° swivelingswing out devicedigital 3D edge finderwork area protectioncoolant equiptmentaut. central lubricationfixed angle table with 10 t-slotschip collecting traymachine lampusers manual in GERMAN + CECOMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 850 mmy-travel: 500 mmz-travel: 500 mmtaper: ISO 40 P.D.B. table-size: 400x1250 mmvolt: 400 VControl: Heidenhain TNC 355 total power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 10500 mmy-travel: 1200 mmz-travel: 1600 mmcontrol: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mmspindle speeds: 20 - 2000 mmvoltage: 380 Vtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 12000 mmy-travel: 2000 mmz-travel: 1000 mmcontrol: E.C.S. 2351 taper ISO: 50 P.D.B. Table dimensions: 450 x 450 mmspindle speeds: 0 - 1500 mmtotal power requirement: 35 kWweight of the machine ca.: tdimensions of the machine ca.: mMist extractionChip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 720 mmy-travel: 360 mmz-travel: 420 mmtaper: ISO 40 table-size: 1000x320 mmvolt: 400 Vtotal power requirement: 5,5 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: mUniversal milling headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 8000 mmy-travel: 2500 mmz-travel: 1000 mmcontrol: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mmvoltage: 380 Vtotal power requirement: 27,6 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 500 mmz-travel: 600 mmtaper: ISO 40 P.D.B. table-size: 500x1250 mmvolt: 400 VControl: Heidenhain TNC 410MA total power requirement: 10 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1250 mmy-travel: 1000 mmz-travel: 1000 mmtaper ISO: 50 Table dimensions: 650 x 1000 mmspindle speeds: 32-1600 voltage: 380 VControl: Philips total power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 890,820 mmturning length: 4000 mmcontrol: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mmcross movement: 500 mmquill stroke: 140 mmtailstock adjustment: 3708 mmspindle turning speed range: 5-1800 U/minmilling tool taper: 1500-6000 U/minfeed: 0,5-5000 mm/minrapid traverse: 15 m/minfeed power: 22000/10000 NTool changer: 95 St.steady: CNC tail stock: CNC total power requirement: 50/69 kWweight of the machine ca.: 23,5 tdimensions of the machine ca.: 10x4x3,3 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your ...
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4,4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 222,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1500 mmy-travel: 800 mmz-travel: 800 mmtable-size: 2.200 x 750 mmhandwheel: Ink. number of spindle speeds: 3.000 U/min/rpmspindle drive: 15 kWtool taper: SK - 50 Control: Heidenhein TNC 426 total power requirement: 30 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 720 mmy-travel: 220 mmz-travel: 450 mmtable surface area: 1000x310 mmweight of the machine ca.: 1.500 kgdimensions of the machine ca.: 2000x1200x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle taper: 2 x SK 40 forward bearing diameter: 110 mmmilling head speed: 100 - 4500 U/minmilling drive: 5,1 kWworkpiece length - max.: 830 mmworkpiece dia. with double equipment: max. 135 mmtaper diameter: 78 g6 mmcentre height: 260 mmturning speed range - stepless: max. 15 U/mindistance of spindles: 135 mmspindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mmFeed speed: max. 6 m/min.surface area: 200 x 1750 mm: tool post (Z-axis): stroke of tool slide: 120 mmFeed speed: max. 2 m/min.column movement: 200 mm: tail stock: tailstock quill stroke: 100 mmmorse taper: 3 MKcentre height: 260 mmaxial distance of the quills: 135 mmpassage of steadyrest: 40 - 80 mmcontrol: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 twith SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolantThe data for this ...
x-travel: 2800 mmy-travel: 1000 mmz-travel: 1200 mmtable surface area: 2000 x 800 mmrotary table dia.: 800 mmspindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/minmax. torque on the spindle: 3000 Nmspindle drive: 30 kWfeeds longditudinal/cross/vertical: 2 - 2000 mm/minrapid motion -longitudinal/cross/vertical: 7 m/mincontrol: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mmwotkpiece diameter with 2 vacant positions: 200 mmworkpiece length: 400 mmweight of tools max.: 16 kgtool changing time: ca. 8 - 9 secinternal coolant system feed: ja / yes total power requirement: kWweight of the machine ca.: 25,4 t= 5-axis CNC-bed-type milling machine with integrated NC-rotary table andNC-swivelling milling head -Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration ...
max. wheel diameter: 160 mmgear width: 710 mmmax. module: 4,5 min. module: 0,5 milling spindle speeds (infinitely variable): 70 - 400 U/mincentre distance: 800 mmtotal power requirement: 11 kWweight of the machine ca.: 4,7 tdimensions of the machine ca.: 3,6 x 3,0 x 2,0 m2-cut-cycle, shifting, very nice condition.Change gears, arbors.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 350 mmz-travel: 375 mmdigital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/minspindle taper ISO: 40 table surface area: 800 360 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 2 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-40973-108
Auction-ID: A7-44593-14
working range 650x900mm, equipped with: computer, coolant pump, 400V connection, Auction-ID: A1-41987-98
The machine is a HELLER CNC milling machine type BEA 07, built in 1989, equipped with a modernized Siemens SINUMERIK 840D Powerline control system. HELLER stands for robust, heavy-duty industrial construction with high rigidity and designed continuous load in series and precision operation. ⸻ Control The machine is equipped with a Siemens SINUMERIK 840D (Powerline). Features: • Colour display with HMI Advanced surface • Soft keys to the left and right of the screen • Separate machine control unit • Feed and spindle override controls • Integrated S7-PLC • PROFIBUS connection • Emergency stop switch on the control panel The 840D is a proven industrial control system with high spare parts availability and good service support. ⸻ Electrical data (according to nameplate) • Current type: 3~ three-phase current • Voltage: 380 V • Frequency: 50 Hz ...
Pick-up possible in the following period: 27.02.2025 from 09.00 to 16.00 Serial No.: 50041605013 Drive: Total connected load: 4.5 kW Operating voltage: 400 V, 50 Hz Stepless drive with frequency converter Electronically adjustable spindle speed: 9 - 6750 min⁻¹ Number of gears: 8 Working Range: Max. milling head diameter: 100 mm Max. end mill diameter: 20 mm Drilling capacity in steel (S235JR): 32 mm (continuous 28 mm) Vertical spindle feed: 0.038 / 0.076 / 0.152 mm/revolution Table length: 1370 mm Table width: 254 mm Max. load tolerance of the table: 275 kg Travels: X-axis (manual): 900 mm X-axis (automatic): 800 mm Y-axis (manual): 320 mm Z-axis (manual): 400 mm Z-axis (automatic): 365 mm Spindle: Spindle mount: ISO 40 DIN 2080 Quill stroke: 127 mm Spindle reach: 200 - 680 mm Swivel range of the milling head: ±45° in the Z and X plane Condition: unchecked Other equipment: inc ...
x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmcontrol: TNC 320 HEIDENHAINspindle taper ISO: 40 spindle turning speed range: 50 - 4.000 U/mintable-size: 800 x 400 mmtable load: 400 kgfeeds -stepless-: 0 - 8000 mm/minrapid traverse: 8,0 m/minpower capacity: 6,0 kWquill stroke: 80 mmcoolant: voltage: 400 Vtotal power requirement: 17,0 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 1,90 x 2,70 x 2,05 m- Fabr.No.: 90288- Control: TNC ---- electrical hand wheel- Horizontal milling spindle- Coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling machine for sharpening planer knives, wood chisels & wood routers Auction-ID: A3-40494-5148
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Surplex GmbH
1.000 € 
