subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 103)
x-travel:850 mmy-travel:280 mmz-travel:355 mmtotal power requirement:8 kWweight of the machine ca.:4 tdimensions of the machine ca.:2 x 2 x2.40 mrevolutions per minute: 28-1.400 U/mintable-size:1.200 x 370 mmsurface area:1.060 x 260 mmspindle taper:SK 50
x-travel:560 mmy-travel:500 mmz-travel:450 mmtotal power requirement:16,5 kVAweight of the machine ca.:2700 kgdimensions of the machine ca.:2,30 x 3,0 x 1,90 mcontrol:Grundig quill stroke:80 mmtool taper:SK 40 spindle speeds::40..4000 1/minfeed:2 .3600 mm/minrapid traverse:4000 mm/minDocuments:vorhanden
x-travel:1120 mmy-travel:345 mmz-travel:400 mmtotal power requirement:14,5 kWweight of the machine ca.:3,85 tdimensions of the machine ca.:3.500 x 2.920 x 2.710 mmtable-size:1600 x 400 mmspindle taper:SK 50
total power requirement:2,4 kWweight of the machine ca.:1150 kgdimensions of the machine ca.:1550 x 1615 x 1630 mmtable clamping surface LxW:315 x 710 mmmax. tool weight:200 kgT - slots distance:63 mmT - slots - width:12 mmtaper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/minfeed speeds:11,2 -355 mm/minDocuments:vorhanden
x-travel:600 mmy-travel:400 mmz-travel:380 mmtotal power requirement:6 kWweight of the machine ca.:1700 tdimensions of the machine ca.:1800 x 2130 x 1980 mmTable dimensions:400 x 800 mmT-slots:7 St.,14 x50 table load:300 kgspindle:SK40 turning speed range:63-250 U/minspeed steps work spindle:18 spindle speeds::50- 2500 n/minfeeds:10-500 mn/minDocuments:vorhanden
x-travel:500 mmy-travel:400 mmz-travel:340 mmwork table::800 x 400 mmcontrol:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/mintotal power requirement:14 kWweight of the machine ca.:2400 kgdimensions of the machine ca.:2100 x 1800 x 2400 mm
x-travel:600 mmy-travel:500 mmz-travel:400 mmspindle diameter:90 mmspindle turning speed range:45 - 2000 U/mintable length:1250 mmtable width:200 mmgroove width:14 mmtable rotating:45 °total power requirement:4,2 kWweight of the machine ca.:2000 kgdimensions of the machine ca.:2000 x 1800 x 1550 mmYear:ca.1957 Documents:vorhanden
Equipped with: has a table of 1350 × 320 mm, a longitudinal travel of 700 mm, a transverse travel of 240/260 mm, a vertical travel of 370 mm, 18 spindle speeds of 31.5–1600 rpm, a main motor of 7.5 kW, a number 3 spindle cone, a spindle bore of 29 mm, a swivel range of ±45°, a maximum workpiece weight of 250 kg Auction-ID: A1-47365-10
Combination lot with Nilfisk industrial vacuum cleaner, floor mixer and AGP slot saw Specifications: 1 x Nilfisk industrial vacuum cleaner Model: VHS120-H / VHS120 Special Serial Number: 3820231900265 Power: 2.00 kW Connection: 230 V Rated current: 8.50 A Frequency: 50/60 Hz Weight: 45 kg Protection class: IP44 Year of manufacture according to type plate: 05-2023 1 x floor processing machine, brand/type according to type plate: LFR-E-4-S Serial Number: FIQ20220074 Connection: 400 V / 50 Hz Equipped with electric motor and mobile chassis 1 x AGP wall saw/slot saw Model: CG150 Power: 2,500 W Connection: 220–240 V / 50–60 Hz Speed: 6,500 min⁻¹ Maximum grinding wheel diameter: 150 mm Axle hole: 22.2 mm / 7/8\" Maximum slot width: 47 mm Maximum cutting depth: 50 mm Features: Nilfisk vacuum cleaner with hose and accessories Mobile Floor Processing Machine ...
Equipped with machine clamp, lifting eye and various accessories in 2 red trays Auction-ID: A1-50393-192
Equipped with: INCL ALL TOOLS, X/Y/Z range of 500/400/400 mm, table of approx. 680 × 380 mm, ISO 40 tool holder, spindle speed 20–3,150 rpm, feed range 1–3,000 mm/min, rapid traverse 6 m/min, swivelling milling head ±90°, main spindle motor 5 kW, total connected load approx. 12 kW Auction-ID: A1-47365-9
Voltage: 220 V, Frequency: 50/60 Hz, Motor power: 0,75 kW, Motor speed: 2850 rpm, Max. machinable profile height: 90 mm, Max. machinable profile width: 120 mm, Arbor diameter: Ø30 mm, Max. blade width: Ø140 mm. Auction-ID: A1-50595-8
Power supply: 380V, 3 ph, 50 Hz, Total electrical power: 1.1 kW, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 15350 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 115 mm, Max. machinable profile width: 110 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-43
Mecanumeric Normaprofil T2515 CNC portal milling, year of construction 2009. Machine suitable for processing plastics, composites, wood, resins and non-ferrous metals such as aluminum. Equipped with a vacuum clamping table, automatic tool changer, CNC control and extraction connection. The machine has a gantry construction and is designed for processing large workpieces. The T2515 model has a working range of approximately 3,100 × 2,100 × 870 mm. The manual control and head changer on the right side are defective and need to be checked. ATTENTION The machine must be disassembled by the buyer himself. Auction-ID: A3-46133-34030
Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38
Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 0.75 kW, Copy router spindle motor: 0.75kW / 220 V / 3 ph / 50 Hz, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 14000 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 130 mm, Max. machinable profile width: 130 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-20
2 router cutters, each with an 8 mm cutting diameter and an 8 mm shank diameter, Motor power: 1,1 kW + 1,1 kW, Motor speed: 12000 rpm, Power supply: 380 Vac - 3 phases, Air consumption: 8 l/min. Auction-ID: A1-50595-30
Electrical supply: 220Vac/50Hz, Motor power: 0.85kW, Motor speed: 32000 rpm, Profile routing height: min. 40mm, max. 100mm, Cutter diameter: 8mm/5mm/80mm Auction-ID: A1-50595-5
Power supply: 380V, 3 ph, 50 Hz, Electrical power: 0,75 kW, Copy router spindle motor: 0,75 kW / 380 V / 3 ph / 50 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm, Copy routing capacity: x: 260mm / y: 105 mm / z: 90mm, Router cutter dimensions: Length: 80-120 mm / Diameter: Ø8mm. Auction-ID: A1-50595-15
x-travel: 4000 mmy-travel: 1200 mmz-travel: 1500 mmtable-size: 4200 x 1100 mmtool adaptor: SK 50 |turning speed range: 5000 U/minrapid speed: m/minfeed speeds: m/min |power requirement: 37 kWcontrol: Heidenhain iTNC 530 table load: 6,0 ttransmission ratio: max. torque on the spindle: Nmmilling head -swivable: A= 1,0°/ B= 1,0° Gradtool change unit: 60 SK 50range L-W-H: 11,0 x 5,0 x 4,0 mweight of the machine ca.: tUniversale CNC- bed milling machine with extra round table H/V- internal coolant- filter system- oil cooler- external handwheel- chipconveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Description Universal horizontal milling machine designed for milling, drilling, slotting and general machining operations. The machine is equipped with a horizontal spindle fitted with a vertical milling head, providing flexibility for both horizontal and vertical machining applications. Technical Details Machine type: Universal horizontal milling machine Horizontal spindle with mounted vertical head Table length: Approx. 1,100 mm T-slotted work table Mechanical hand feeds Powered longitudinal table feed Multi-speed gearbox Heavy cast-iron construction Condition Used industrial condition. The machine appears complete with horizontal spindle, vertical milling head, T-slotted table and feed mechanisms. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-19
General Description Horizontal milling machine, exported by Stankoimport. Designed for milling, slotting and general machining operations. The machine is equipped with a horizontal arbor spindle and supplied with installed milling tooling and a table-mounted clamping fixture. Technical Details Machine type: Horizontal milling machine Exporter: Stankoimport Horizontal arbor spindle T-slotted work table Multiple milling cutters mounted on the arbor Table-mounted clamping fixture included Manual X/Y/Z table feeds Mechanical feed gearbox with feed and spindle speed selectors Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and clamping fixture installed. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-24
General Description Universal toolroom milling machine manufactured by AVIA, model FOP. Designed for precision milling, drilling, boring and general toolroom machining. The machine features both horizontal and vertical spindle configurations for versatile machining operations. Technical Details Manufacturer: AVIA Model: FOP Machine type: Universal toolroom milling machine Horizontal spindle with arbor mounting Vertical swivelling milling head Power-feed work table Mechanical gearbox Universal milling configuration Separate electrical control cabinet Condition Used industrial condition. The machine appears complete with horizontal spindle, swivelling vertical milling head, power-feed table, mechanical gearbox and separate electrical cabinet. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-28
General Description Heavy-duty horizontal spindle rotary table surface grinder of Soviet manufacture, exported by Stankoimport, Moscow, USSR. Designed for precision grinding of flat surfaces on large workpieces. The machine is equipped with two rotary work tables and a horizontal grinding spindle, making it suitable for grinding rings, discs and other circular components. Technical Details Manufacturer: Unknown (exported by Stankoimport, USSR) Model: Not identified Machine type: Horizontal spindle rotary table surface grinder Year: Not confirmed Origin: USSR Two independent rotary work tables Horizontal grinding spindle Manual longitudinal table movement Mechanical/manual cross feed Manual feed controls Coolant system Hydraulic/mechanical feed system Condition Used industrial condition. The machine appears mechanically complete with both rotary tables, grinding spindle, feed controls a ...
350 € 
