fresadoras usadas para venda (2,437)

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block-Step block: clamping pad for clamping tool, 2 pieces-Clamping width: 50 mm-Price/Delivery: complete-Dimensions: 120/60/H140 mm-Weight: 1.9 kg/piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Clamping angle: for workpiece clamping-Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm-Dimensions: 300/160/H200 mm-Weight: 18 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories-Manufacturer: AMF, stair trestle DIN 6318 2 pieces = 1 set-Type: AMF 230 DIN6318-Usage: in pairs-Clamping height: 192.5 - 230 mm.-Price: complete-Dimensions: 108/68/H230 mm-Weight: 3.3 kg/piece

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 141 mm-Dimensions: see photo technical drawing-Dimensions: 157/72/H108 mm-Weight: 1.8 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Clamping table: milling machine table-Table surface: 400 x 600 mm-T grooves: groove width 14 mm, groove spacing 50 mm-rotatable. by hand with 6x fastening screws-can be tilted and swivelled: via cranks-fits for Deckel Mikron WMW and other milling machines-Total dimensions: 700/600/H345 mm-Weight: 198 kg

Controlo Hurco MAX5 Velocidade [rpm] 10000 Travel X/Y/Z [mm] 762/508/610 Captador de ferramentas SK 40 Geral: Controlo Hurco MAX5 Travel X/Y/Z 762/508/610 Velocidade 10.000 rpm Fuso: Tecnologia de fuso de correia Velocidade 10.000 rpm Suporte para ferramentas SK 40 Banco de Trabalho: Área de fixação aprox. 1.020 x 510 mm Carga máxima da mesa: 1.335 kg Ranhuras em T 18 mm Revista Tool: Revista Technology Drum Empunhadura Dupla Trocadora de Ferramentas Número de estações: 24 peças Diâmetro da ferramenta máx. 81 (120) mm Comprimento da ferramenta: máximo 300 mm Equipamento / Acessórios: Transportador de chips para descarte de aparas Instalação de fornecimento de líquido de arrefecimento IKZ Mesa rotativa NC 4.º eixo (eixo A) Medição de Ferramentas Sondas Renishaw Funcionamento de configuração Roda eletrónica

A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible.

Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement.

Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.

Hydraulic vice, machine vice, NC compact vice -transfer in current condition as seen -Vise has no spindle and is therefore sold as dismantled -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Fresadora Deckel FP4 NC BJ 1987 Especificações •Viagens: eixo X o: 560 mm eixo o Y: 500 mm eixo o Z: 410 mm • Inclui armário de ferramentas e várias ferramentas (ver foto)

Fresadora da Reckermann: TIPO: DELTA1300 K X(Longitudinal)/Y (Transversal)/Z (Vertical): 1500x 500x 450 mm Suporte de ferramentas DIN 2080: SK50 Funciona na perfeição

A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible.

Travel X/Y/Z: 850mm/630mm/500mm, table dimensions X/Y: 1200mm/550mm, max. table load: 700kg, tool holder: SK40, tool stations: 34, speed: 5000rpm, spindle head swivel: +/-90°, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2400mm, weight: approx. 6800kg. Documentation available. An on-site inspection is possible.

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible.

Horário de funcionamento: 600h Especificações: Viagem em X/Y/Z: 450 / 350 / 400 mm Distância da mesa do nariz do fuso: 230 - 630 mm (fuso de fresagem horizontal) Velocidade de travessia rápida X/Y/Z: 5000 / 5000 / 5000 mm/min Alimentação de trabalho X/Y/Z: 10 - 2000 mm/min infinitamente variável Força máxima de alimentação em X/Y/Z: 10 / 10 / 15 kN Superfície de fixação: 800 x 400 mm (mesa angular rígida) Carga máxima da mesa: 30 kg (mesa angular rígida) Cabeça de fresagem vertical: Faixa de velocidade: 10 - 5000 1/min Potência: 10 kW Dimensões (CxLxA), aprox.: 1980 x 2030 x 1990 mm Peso, aprox.: 2270kg Equipamento: - Painel de controle giratório - Eixos e engrenagens endurecidos e moídos - Display digital baseado em Sinumerik 828D - Rotação do eixo principal no sentido horário/anti-horário - Guias lineares - Eixo de fresagem radial/ ...

Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible.

Cortador de entalhe Comall Tipo: Mill One

Cortador de entalhe Wegoma Tipo: AKF 125 para fresagem de perfis de plástico e alumínio com perfil de paragem giratória em ambos os lados 60 Dispositivo de fixação pneumática Alimentação manual com alavanca manual do motor de fresagem trifásico Arranque do motor diretamente na alavanca manual Bico de sucção com um diâmetro de 100 mm a funcionar na carruagem de fresagem Parada de perfil ajustável sem ferramentas com parafuso de bloqueio para 90 e 45 de ambos os lados Motor de fresagem de potência 1,5 kW Motor de fresagem de velocidade 2800 rpm Caminho de fresagem máx. 380 mm Diâmetro da fresa diâmetro/altura máx. 210 mm/ 90 mm Diâmetro do eixo de fresagem 27 mm Dimensões: L 700 mm x L 500 mm x A 700 mm Peso aprox. 50 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm -Weight: 106 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 65 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 171 kg

Fresadora universal de ferramentas DECKEL FP 3 Com display digital ativo de 3 eixos Heidenhain TNC 11 Ano de Marca: 1984 Viagens: X 500 Y 300 Z 400 Faixa de velocidade: 25 – 2500 rpm Com os seguintes acessórios: Mesa angular rígida 850 mm x 400 mm superfície de fixação Mesa rotativa giratória 0 450 mm com discos divisórios Para-choques Cabeça de fresagem vertical deslizante Furadeira extensível Alimentação contínua através de potenciómetro Vários mandris de moagem SK 40 / S22 x 2 Bandeja de cavacos Bomba de lubrificação automática para o eixo X, Y, Z Luz da máquina Configuração do líquido de arrefecimento 4 pcs sapatos de máquina Instruções de utilização

A conventional universal milling machine H. Ernault Somua is available. Table dimensions X/Y: 1600mm/370mm, travel X/Y/Z: 1000mm/320mm/440mm, spindle taper: ISO50, speed: 2000rpm, power: 7.3kW. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1600mm, weight: approx. 2500kg. The NC display and coolant system are defective. The machine shows an offset of 0.4mm on the X-axis. An on-site inspection is possible.