サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 706)
Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data Manufacturer: Gernep Model: Soluta 6-720 2SK SD Year of manufacture: 2023 Machine typ ...
Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles.Technical DataCapacity: 14,400 bottles/hour for 0.5 L bottlesProducts: Still and carbonated waterContainers: PET bottlesBottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L, currently running 0.5 L bottlesLabelling: PE Roll-LineCap feeding system: Gravity 26Pack formats: Packs of 12 for 0.5 L and 1.0 L bottles Packs of 24 for 0.5 L bottles Packs of 6 for 1.5 L bottlesPallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mmCondition: Used lineVideo: youtu.be/XUEY0L49VJQMachines and Equipment1. PET blow moulding machine – Sidel SBO 8, year 2006Including preform tipper, preform hopper, elevator, orienter and feed chute2. Air conveyor – Lanfranchi, year 20063. Chiller – MTA, year 20264. Filling machine – SACMI Blu Star ...
CIMECイタリア製の充填ブロックは、リンサー、フィ ー、キャッパーで構成されています。1時間あたり10 00本のボトルを生産します。集水板上で手作業で積 込みと配注を行います
Filter format: 600mm×600mm, throughput: approx. 45hl/h, number of plates: 17, number of frames: 16, number of end plates: 2, inlet and outlet pressure gauges: included, overall length: approx. 3200mm, overall width: approx. 800mm. The machine is equipped with all seals and is ready for use. An on-site inspection is possible.
Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data Manufacturer: K ...
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1454, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h
The APV Puma 2.2.9 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor). Diameter of the impellor: 191 mm (7,5). Pump casing: 9. Connections on the inlet: 2. Connections on the outlet: 2. Capacity with the current motor: ± 35 m3/h at a differential pressure of ± 2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1656, Diameter of the impellor: 191 mm, Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor), Current estimated capacity: ± 35 m3/h at a differential pressure of ± 2 Bar
Suitable for 0.7l-VdF bottles, capacity: 3000bottles/h, running direction: right to left, the packing head is equipped with 12 long-life packing tulips, the machine was used in low-volume operation, is very well maintained and has low operating hours, an on-site inspection is possible.
Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible.
Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.
LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottlesIDENTIFICATION- Manufacturer: LEIBINGER- Model: TRANSVASA 12/6 EK- Year of manufacture: 2017- Serial/order number: 472447- Previous application: ciderFUNCTION AND OUTPUT- 12 emptying valves- Counter-pressure emptying with long-tube technology- 6 decapping stations- Direction of operation: clockwise- Nominal output: 2,500 bottles/h for 0.75 l bottles- Adjustable range: 560–2,800 bottles/h- Designed for carbonated beverages, e.g. traditionally produced cider- Automatic removal and collection of pierced bottle closures- Integrated through conveyorPRODUCT AND UTILITY DATA- Maximum product temperature: 20 °C- Compressed air: 6 bar, connection R 1/2- CO? product pressure: 8 bar, gas connection R 1/2- Product outlet: DN 40- Gas discharge: DN 40- Buffer tank: 1 ...
Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQs warehouse in Germany from early September 2026. Technical data Manufacturer: Grone ...
Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...
品番:Velo-400-20-MC - エッジを密封するために19枚のフィルタープレート 持つイーストフィルターを使用し、全長約2 300mm - 総フィルター面積:5.3m²、総リーズ含有量66リットル - 新しいモノフィラメントフィルタークロス(No. 1001.6439) - ダイアフラムポンプ付き 1800リットル/時 - 点滴トレイ付き - 新しい手動油圧ポンプを搭載 - 圧力スイッチ、圧縮空気接続、安全弁 - ワインスレッド(希望のまま) - 1年間の機能保
Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data Free air delivery: 2,100 m³/h (35 m³/min) Operating pressure: 40 bar Design pressure (PS): 42 bar Speed: 480 rpm Shaft absorbed power: 355 kW Voltage: 400 V Year of manufacture: 2003 Application: PET bottle blowing Scope of delivery 1 × High-pressure compressor 40 bar CE68 ASG 1 × Refrigeration dryer 1 × Electrical control cabinet Condition Still installed and electrically connected Available for inspection on site Availability Immediately available.
Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machines controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12 touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data Manufacturer: Ortmann + Herbst Model: Hansa B 100/20 Year of manufacture: 1994, completely refurbished 2013 Machine type: rotary filler with screw capper, ...
特徴: 第3150巻 資料番号 V2A 最大動作過圧0.99バール 全高3000mm 直径1300mm 外径1400mm 2B内部の表面=IIIC地表 2B=IIIC地表の外側 作動温度:20°C シリンダー長 2000 mm 説明: 表土: クラッパーボトム ねじノズル DN40 セントラル ねじノズルDN40側 逆止弁 円筒: マンホール 440 x 340 楕円形 サンプルタップ DN15 ラダーフック ディスクバルブと圧力計を備えたダウンスイープ式C IPラインDN40 ねじ溶接ノズル DN25 ディスクバルブ付き インレットとアウトレットの冷却コイル 3/4インチ ブラインドカバーフランジネック DN125 アンダーボディ: クラッパーボトム/カーブバック 前方引き出式残留排水管(ディスクバルブDN50、タン 壁にぴったり)があり ...
特徴: 第2750巻 L 資料番号 V2A 最大動作過圧2バール 全高:2850 mm 直径1540mm 外径1550mm 2B内部の表面=IIIC地表 ガラスビーズの外側の表面をブラストで破壊しまし 説明: 表土: クラッパーボトム/カーブバック フランジカバー直径450mm 接続オーバーフローパイプ DN40 横方向のアウトワン ディスクバルブ付きねじ溶接ノズル DN65 ねじ込み溶接ノズル DN65 ねじ込み溶接ソケット2つ DN25 円筒: ラダーフック 下向きに引き上げられたCIPケーブル DN40 4×冷却コイル(幅70mm) 温度センサー フィッシャー 溶接ソケット DN15 アンダーボディ: 冷却ジャケット付きコーンベースは高さ35cmです サイドスレッド溶接ノズル DN32 3プロファイルの脚、カ ...
Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data Manufacturer: M+F KEG-Technik Model: MICROMAT M 1/1-F KeyKeg Year of manufacture: 2011 Machine type: semi-automatic KeyKEG filling machine Capacity: 50-60 KeyKegs per hour Container formats: 20 l and 30 l KeyKEG Fitting type: KeyKEG fitting Connection voltage: 230/400 V, 50 Hz Equipment EC Declaration of Conformity (Machinery Directive 2006/42/EC) Technical documentation Condition Used. The machine has already been disman ...
Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: TF350 Year of manufacture: 2009 Machine type: tray packer for PET bottles Output: 45 - 50 packs/min Adhesive system: Nordson ProBlue 4 hot-melt unit Packaging material: flat cardboard blanks Guarding: full safety enc ...
Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Contrary to the pictures and videos, please note that the tray forming unit is no longer available. This unit has been removed and is no longer installed in the machine/line. Technical data Manufacturer: SMI (Italy) M ...
On behalf of our client, we are selling this SIG Asbofill ABF (Aseptic Bottle Filler), 10-Lane, PET bottle filling machine which is designed for the aseptic filling of liquid, non-carbonated, microbiologically sensitive high- and low acid products into prefabricated plastic bottles. The client bought a new and bigger aseptic filling machine for extension of his production capacities. This machine is recently dismantled and located in the warehouse of the dairy factory., The machine was used the last 8 years to fill protein shakes and milk related drinks (cold fill) at the current factory. Before it was used for fruit juices. Sterility Assurance Level (SAL) of 6-log reduction. Shell of life of the current products: 9 months. Capacity: 12.000 bottles/h @ 1.000 ml, 10.000 bottles/h @ till 1.500 ml and 8.000 bottles/h @ till 2.000 ml. Filling accurancy: ± 2 ml (filling volume 1.000 ml). Bot ...
Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves, Additional title: Cleaning system for cleaning pressurised tank cellars, Volume circulation tank: 400 l, Length: 2,5 m, Width: 3,0 m, Height: 2,9 m, Operation / Control: Simatic S7, Material: contact surfaces from stainless steel, Position: on stainless s ...
CIP system with a total of 7 tanks, including: - 1 tank with a capacity of 60 hl as a reserve water tank - 5 tanks, each with a capacity of 30 hl (manufactured in 1992), for acid, reserve water, Desi, and 2 x lye - 1 tank with a capacity of 20 hl (manufactured in 1992) for fresh water Additional system components: - 3 centrifugal pumps - Heat exchanger - Conductivity measurement - Various piping and valves, Additional title: 7-tank CIP system with pumps and heat exchanger, Volume stacked water tank: 6000 l, Volume 5 x tanks for cleaning solutions: 3000 l, Volume fresh water tank: 2000 l, Material: stainless steel, Position: vertical vessels each on 3 feet, Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 3 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves
Vertical outdoor tank with insulation and cladding, most recently used as a storage tank for hot water., Additional title: vertical outdoor stainless steel tank with insulation, Gross volume: 80000 l, Material: Stainless steel 1.4571 (AISI 316Ti), Position: standing on a concrete plinth, Base construction: cylindrical tank with a dished dome, Features: Insulation; cladding; lifting eyes; cleaning pipe
vertical stainless steel tanks with insulation and cladding, most recently used as storage tanks for degassed water, Additional title: vertical, insulated stainless steel tanks, Gross volume each: 14340 l, Material: stainless steel, Position: each standing on 3 feet, Base construction: cylindrical frames, Features: outlet pipe with manual valve; overflow pipe ladder bracket; manhole
ブッヒャー・プレス HP 3000 製造年:1982年 リンゴ、洋ナシ、ブドウなどの果物の加工に適して ます。 出力:製品や運転条件によりますが、1時間あたり約2 3トンのリンゴです。 この機械はドイツのサイダー製造施設で使用されま た。この機械はもはや製造されていません。」
