サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 108)
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 €: 149.19 €: 500 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.37 kW: 0.1 - 3 U/min: 45 s: 800 mm: M20X6 mm: 640 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segmentcyc ...
: neu : ca. 2 - 4 Wochen ab Auftr : 2590 €: 16 mmThe set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow.Consisting of:10 screw clamps 180° HIS16Z30004 screw clamps 45° HIS16Z30454 V-support HIS16VP1008 stop brackets 90x37, 5mm HIS16WA90378 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3001 piece stop bracket 500mm HIS16WA500L1 piece stop bracket 500mm HIS16WA500R4 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11528 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS- Cleaner-1L1 piece Anti-stick agent HIS-Premium-1LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range for steel to:20 mmtotal power requirement:3~ 220 / 380 Vweight of the machine ca.:100 kgdimensions of the machine ca.:500 x 750 x 1000 mm
cutting width:2500 mmNumbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kWlength:6000 mmcontrol:KS 20 A Messer Griesheim Documents:vorhanden
table width:2300 mmtable length:7000 mmburner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden
Metal cored wire, 1.2mm, 15kg. Lot consists of 15 boxes. Auction-ID: A1-41275-114
Welding Rotator for Flanges – Motorized and Idle Rollers General data: Machine type: Welding rotator Weight: approx. 2000 kg Technical details: Motorized rollers for controlled rotation Idle rollers for supporting and aligning workpieces Control system for adjusting rotation speed and direction Heavy-duty steel frame suitable for high load capacities Description: Industrial welding rotator designed for rotating heavy cylindrical workpieces such as pipes, tanks, and flanges during welding operations. The combination of motorized and idle rollers ensures stable positioning, smooth rotation, and improved welding precision and efficiency. Auction-ID: A7-45351-20
ABB PS 90/6-57-P-LSS-4280 – Welding Robot General data: Manufacturer: ABB Model: PS 90/6-57-P-LSS-4280 Year of manufacture: 1999 Serial number: 002.8367660 Weight: approx. 300 kg Dimensions (L x W x H): approx. 3500 x 2000 x 2500 mm Description: Industrial welding robot from ABB designed for automated welding applications. The system enables precise and repeatable welding operations, improving productivity and consistency in manufacturing processes. Auction-ID: A7-45351-46
ABB IRB 1400 M98 – Welding Robot General data: Manufacturer: ABB Model: IRB 1400 M98 Serial number: 156368 Year of manufacture: 1999 Weight: approx. 300 kg Dimensions (L x W x H): approx. 3500 x 2000 x 2500 mm Condition: Functional Description: Industrial welding robot ABB IRB 1400 M98 designed for automated welding applications. The robot ensures high precision, repeatability, and efficiency, making it suitable for industrial production environments. Auction-ID: A7-45351-48
Set of 5 Welder's Fume Suction Nozzles with Complete Piping and Fume Extractor. The equipment is functional and can be dismantled by your own means. Provision of 2 forklifts and a basket basket (adaptable to forklift). The seller will be present on site just to inform you if necessary. Removal of equipment in Nandrin. Auction-ID: A3-43506-1
: neu : ca. 2 - 4 Wochen ab Auftr : 4400 €: 2400 x 1200 mm: 850 mm: 8000 kg: 945 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...
: neu : 2025 : 020156 : prompt, Zwischenverkauf v : Türkei : 6720 €: 129.7 €: 1 : 250 kg: 205 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mm: 1000 mm: 700 mm: 1700 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following f ...
: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...
Water-cooled. Please note! Without hose package and torch Auction-ID: A1-41275-180
No cables and torch available. Auction-ID: A1-41275-39
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...
Metal cored wire, 1.2mm, 15kg. Lot consists of 15 boxes. Auction-ID: A1-41275-112
Metal cored wire, 1.2mm, 15kg. Lot consists of 15 boxes. Auction-ID: A1-41275-113
CEA – Butt Fusion Pipe Welding Machine General data: Manufacturer: CEA Machine type: Butt fusion pipe welding machine Weight: approx. >200 kg Dimensions (W x H): approx. 350 x 700 mm Description: Industrial butt fusion welding machine designed for joining plastic pipes by heat fusion. The unit is suitable for pipeline installation and maintenance applications, ensuring strong and reliable weld joints in industrial environments. Auction-ID: A7-45351-31
10 € 
